Trying to use SPDIF BYPASS with X-Fi Titanium Fatal1ty
I need help guys!! I've bought a Creative X-Fi Titanium Fatalty Pro PCI-E x a few days ago and everything is working great with the lastest drivers (even DTS Connect, Interacti've, DDL, etc... Everything is fine) but now i want to use the digital input to "bypass" the audio from my SKY HDTV (Home Theater Samsung X-70 digital input, hdmi input and hdmi output) and i've done everything and i can't hear anything... SKY HDTV - > X-FI Titanium Digital Input - > X-Fi Titanium Digital Output -> Samsung HT-X70
I have the SKY HDTV plugged into my Sound card via Toslink Digital Optical cable.
I had done some research online about needing to enable the decoder in the Creative Audio Control Panel, but I have no "Decoder" Tab. Also, there is a tab called SPDIF I/O when I select it, SPDIF input settings are grayed out and in the box is default (pre-selected).
Is there a fix to get a decoder for this sound card, or what should i do?
System config
Core 2 Duo E8400 @ 3.6Ghz
Gigabyte GA-EP43-DS3L
2x2GB Corsair Dominator DDR2 066Mhz
Sapphire HD4890 GB GDDR5 VaporX
Creative X-Fi TItanium Fatalty Pro Series PCI-Ex
Corsair 450VX
Samsung 40" LCD LN40A550 - 920x080@60Hz
Samsung HT X-70
Windows 7 X64 RTM
OK Helsing, let me see if I understand you, If you want to decode DD and DTS, PowerDVD will do the trick, but so will VLCMedia player, etc. If you want to send a pure untouched signal through to your receiver so it can decode it and play it, then that is SPDIF passthrough. That means the signal will go through your system untouched and out to your receiver........and yes there is that setting for it in the SHARK codec package. Shark's package will also use FFDshow or whatever of its components to do the job of which you are speaking.....
http://shark007.net/forum/Thread-problem-spdif-passthrough-x-fi-decoder-Win7
Similar Messages
-
X-Fi XtremeMusic and SPDIF bypass with Windows 7
Hello
I moved from Windows Vista to Windows 7 (64 Bit) now I wanted to use the SPDIF bypass option with the Digital I/O Module again, but in the "SPDIF E/A" tab the drop down box "Settings for SPDIF input" is disabled.
What I need to do to get the SPDIF bypass to work again?
(I don't need any Dobly/DTS decoding - it's just a simple?PCM signal.)
Best regards and thanks in advance
AndreasRe: X-Fi XtremeMusic and SPDIF bypass with Windows 7l Hello hwoarang5,
why do you think that this is disabled in Windows 7 and Vista?
It worked fine in Windows Vista, too.
Anyway, I've searched yesterday evening?a little bit more and solved the problem myself. To enable SPDIF bypass you have to do the following:
. enable Digital Input in the Windows 7 sound settings (it'sis disabled by default and I forgot about it).
2. change the FlexiJack mode in the audio settings of Creative to "Digital E/A".
3. now enable the "Recordation with bit adjustment" (don't know how this is called exactly in the English version).
When there is a PCM (DTS and Dolby is not supported) signal now at the Digital Input you should here something now.
Hope this helps somebody.
Best regards
Andreas -
I'm trying to use kerberos V5 with ActiveDirectory but get an error
I'm trying to use kerberos V5 with ActiveDirectory im using simple code from previuos posts but
when i try with correct username/password i get :
Authentication attempt failedjavax.security.auth.login.LoginException: Message stream modified (41)
when i try incorrect username/pass i get :
Pre-authentication information was invalid (24)
Debug info is :
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Kerberos username [naiden]: naiden
Kerberos password for naiden: naiden
[Krb5LoginModule] user entered username: naiden
Acquire TGT using AS Exchange
[Krb5LoginModule] authentication failed
Pre-authentication information was invalid (24)
Authentication attempt failedjavax.security.auth.login.LoginException: Java code is :
import javax.naming.*;
import javax.naming.directory.*;
import javax.security.auth.login.*;
import javax.security.auth.Subject;
import com.sun.security.auth.callback.TextCallbackHandler;
import java.util.Hashtable;
* Demonstrates how to create an initial context to an LDAP server
* using "GSSAPI" SASL authentication (Kerberos v5).
* Requires J2SE 1.4, or JNDI 1.2 with ldapbp.jar, JAAS, JCE, an RFC 2853
* compliant implementation of J-GSS and a Kerberos v5 implementation.
* Jaas.conf
* racfldap.GssExample {com.sun.security.auth.module.Krb5LoginModule required client=TRUE useTicketCache=true doNotPrompt=true; };
* 'qop' is a comma separated list of tokens, each of which is one of
* auth, auth-int, or auth-conf. If none is supplied, the default is 'auth'.
class KerberosExample {
public static void main(String[] args) {
java.util.Properties p = new java.util.Properties(System.getProperties());
p.setProperty("java.security.krb5.realm", "ISY");
p.setProperty("java.security.krb5.kdc", "192.168.0.101");
p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
System.setProperties(p);
// 1. Log in (to Kerberos)
LoginContext lc = null;
try {
lc = new LoginContext("ISY",
new TextCallbackHandler());
// Attempt authentication
lc.login();
} catch (LoginException le) {
System.err.println("Authentication attempt failed" + le);
System.exit(-1);
// 2. Perform JNDI work as logged in subject
Subject.doAs(lc.getSubject(), new LDAPAction(args));
// 3. Perform LDAP Action
* The application must supply a PrivilegedAction that is to be run
* inside a Subject.doAs() or Subject.doAsPrivileged().
class LDAPAction implements java.security.PrivilegedAction {
private String[] args;
private static String[] sAttrIDs;
private static String sUserAccount = new String("Administrator");
public LDAPAction(String[] origArgs) {
this.args = (String[])origArgs.clone();
public Object run() {
performLDAPOperation(args);
return null;
private static void performLDAPOperation(String[] args) {
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
// Must use fully qualified hostname
env.put(Context.PROVIDER_URL, "ldap://192.168.0.101:389/DC=isy,DC=local");
// Request the use of the "GSSAPI" SASL mechanism
// Authenticate by using already established Kerberos credentials
env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
env.put("javax.security.sasl.server.authentication", "true");
try {
/* Create initial context */
DirContext ctx = new InitialDirContext(env);
/* Get the attributes requested */
Attributes aAnswer =ctx.getAttributes( "CN="+ sUserAccount + ",CN=Users,DC=isy,DC=local");
NamingEnumeration enumUserInfo = aAnswer.getAll();
while(enumUserInfo.hasMoreElements()) {
System.out.println(enumUserInfo.nextElement().toString());
// Close the context when we're done
ctx.close();
} catch (NamingException e) {
e.printStackTrace();
}JAAS conf file is :
ISY {
com.sun.security.auth.module.Krb5LoginModule required
debug=true;
};krb5.ini file is :
# Kerberos 5 Configuration File
# All available options are specified in the Kerberos System Administrator's Guide. Very
# few are used here.
# Determines which Kerberos realm a machine should be in, given its domain name. This is
# especially important when obtaining AFS tokens - in afsdcell.ini in the Windows directory
# there should be an entry for your AFS cell name, followed by a list of IP addresses, and,
# after a # symbol, the name of the server corresponding to each IP address.
[libdefaults]
default_realm = ISY
[domain_realm]
.isy.local = ISY
isy.local = ISY
# Specifies all the server information for each realm.
#[realms]
ISY=
kdc = 192.168.0.101
admin_server = 192.168.0.101
default_domain = ISY
}Now it works
i will try to explain how i do this :
step 1 )
fallow this guide http://www.cit.cornell.edu/computer/system/win2000/kerberos/
and configure AD to use kerberos and to heve Kerberos REALM
step 2 ) try windows login to the new realm to be sure that it works ADD trusted realm if needed.
step 3 ) create jaas.conf file for example in c:\
it looks like this :
ISY {
com.sun.security.auth.module.Krb5LoginModule required
debug=true;
};step 4)
( dont forget to make mappings which are explained in step 1 ) go to Active Directory users make sure from View to check Advanced Features Right click on the user go to mappings in secound tab kerberos mapping add USERNAME@KERBEROSreaLm for example [email protected]
step 5)
copy+paste this code and HIT RUN :)
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.NamingEnumeration;
import javax.naming.NamingException;
import javax.naming.directory.Attributes;
import javax.naming.directory.DirContext;
import javax.naming.directory.InitialDirContext;
import javax.naming.directory.SearchControls;
import javax.naming.directory.SearchResult;
import javax.security.auth.Subject;
import javax.security.auth.login.LoginContext;
import javax.security.auth.login.LoginException;
import com.sun.security.auth.callback.TextCallbackHandler;
public class Main {
public static void main(String[] args) {
java.util.Properties p = new java.util.Properties(System.getProperties());
p.setProperty("java.security.krb5.realm", "ISY.LOCAL");
p.setProperty("java.security.krb5.kdc", "192.168.0.101");
p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
System.setProperties(p);
// 1. Log in (to Kerberos)
LoginContext lc = null;
try {
lc = new LoginContext("ISY", new TextCallbackHandler());
// Attempt authentication
lc.login();
} catch (LoginException le) {
System.err.println("Authentication attempt failed" + le);
System.exit(-1);
// 2. Perform JNDI work as logged in subject
Subject.doAs(lc.getSubject(), new LDAPAction(args));
// 3. Perform LDAP Action
* The application must supply a PrivilegedAction that is to be run
* inside a Subject.doAs() or Subject.doAsPrivileged().
class LDAPAction implements java.security.PrivilegedAction {
private String[] args;
private static String[] sAttrIDs;
private static String sUserAccount = new String("Administrator");
public LDAPAction(String[] origArgs) {
this.args = origArgs.clone();
public Object run() {
performLDAPOperation(args);
return null;
private static void performLDAPOperation(String[] args) {
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
// Must use fully qualified hostname
env.put(Context.PROVIDER_URL, "ldap://192.168.0.101:389");
// Request the use of the "GSSAPI" SASL mechanism
// Authenticate by using already established Kerberos credentials
env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
// env.put("javax.security.sasl.server.authentication", "true");
try {
/* Create initial context */
DirContext ctx = new InitialDirContext(env);
/* Get the attributes requested */
//Create the search controls
SearchControls searchCtls = new SearchControls();
//Specify the attributes to return
String returnedAtts[]={"sn","givenName","mail"};
searchCtls.setReturningAttributes(returnedAtts);
//Specify the search scope
searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(mail=*))";
//Specify the Base for the search
String searchBase = "DC=isy,DC=local";
//initialize counter to total the results
int totalResults = 0;
// Search for objects using the filter
NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
//Loop through the search results
while (answer.hasMoreElements()) {
SearchResult sr = (SearchResult)answer.next();
totalResults++;
System.out.println(">>>" + sr.getName());
// Print out some of the attributes, catch the exception if the attributes have no values
Attributes attrs = sr.getAttributes();
if (attrs != null) {
try {
System.out.println(" surname: " + attrs.get("sn").get());
System.out.println(" firstname: " + attrs.get("givenName").get());
System.out.println(" mail: " + attrs.get("mail").get());
catch (NullPointerException e) {
System.err.println("Error listing attributes: " + e);
System.out.println("RABOTIII");
System.out.println("Total results: " + totalResults);
ctx.close();
} catch (NamingException e) {
e.printStackTrace();
}It will ask for username and password
type for example : [email protected] for username
and password : TheSecretPassword
where ISY.LOCAL is the name of kerberos realm.
p.s. it is not good idea to use Administrator as login :)
Edited by: JOKe on Sep 14, 2007 2:23 PM -
I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either
Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile. -
I have a hp hpe-595a, i'm trying to use stereo mix with a hot mic. anyone know how to do this?
I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
I can't do this with the IDT codecs supplied.Hey Redritr,
Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
via iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
It also may be that the iTunes Store is prompting to verify your billing information:
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
via iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Additional Information:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Thanks,
Matt M. -
I am trying to use my I Tunes account with a new computer. Now we can't get the new music we bought to sync with the Nano. Any ideas?
Downloading past purchases
http://support.apple.com/kb/HT2519
Recovering iTunes library from your device.
https://discussions.apple.com/docs/DOC-3991 -
In my 2013 Honda Civic Si, I'm trying to use the SMS Text Message Function, but keep getting the error message, "Unsupported Device".
I use an iPhone 5 with latest iOS 6.1.4.
HandsFreeLink works perfectly fine with my iPhone for voice calls and for streaming Bluetooth Audio. Does text messaging not work because of iMessage? Does anyone have any suggestions for this issue?
Thanks in advance!In looking for a 2013 Honda Civic (LX model, no Navi), the text feature was very interesting and important to me. Why not have my texts available on the dash and read to me rather than messing with my phone. Anyway I won't go into the whole thing about safety while you're in your driving and all that. We all know what we should and shouldn't do. Anyways...
I spoke to a salesman who said that this feature was not compatible with the iPhone, only BBs. Of course this didn't impress me and I found it hard to believe that Honda would restrict themselves like that. Anyway, a few searches on the web later and Honda shows that the iPhone 4, 4S and 5 are compatible for receiving texts through the car, just not sending them. I believe you need a minimum of iOS 5+ for it to work though.
Once I found this the salesman and I did some testing with our phones. He has a 4S with iOS 6.1.3 and mine is a 4 with iOS 6.1.3. Initially we setup the phone using the Bluetooth config on the Civic's iMID display. It was setup and hands-free calling tested o.k. Next the texting was tested. Both of us have iMessage turned on. Neither of us could get the messages we would send each other (1 of us had our phone setup with the car, the other sent the text and vice versa). The messages were received by the phones, just not the car). When we would go under the Text Message section, it would say "Unsupported Device". I knew that couldn't be as Honda said it was compatible. After more web searches and a phone call to Honda by the salesman, I found the following.
1) It seems like the person who had their phone paired with the Civic had to disable iMessage to start getting texts. The salesman still had it enabled on his though when he sent me texts (as SMS) and the Civic got them so both people aren't necessarily required to disable it. Now under the Text Message section, it would list the messages received.
2) I changed the Notifications on my phone for Messages from Banner to Alerts. Once I did this it started to work. The texts were showing up on the car. I had read where another person had tried this successfully but then changed it back to Banner and it continued to work. I experienced the same thing.
Granted this wasn't extensive testing but I was able to get it to do something closer to what I wanted. I'm not sure why Apple and Honda can't put their heads together to make sending texts work on the car but maybe someday it will work when enough people complain. It's kind of a disappointment that I couldn't get iMessage to work but I haven't given up hope yet. As it's a proprietary protocol, I can see Honda not supporting it though.
Hope this helps someone out!
FYI I bought car! -
I was trying to use imessage to share a photo with iPhoto. I go the message "couldn't communicate with a helper application"
My iMessage works fine for everything else. I am currently running yosemite and every app has been updated.
I restarted the macbook pro and i didn't resolve the situation. Is anyone else having this issue?
dawnAre you getting that message window after clicking on the "+" button to access your Contacts?
That's what happens to me. I know of now way to fix it.
My workaround is to create a new message in Messages and drag the photo from the iPhoto window into the message section of a new message and use the "+" button there to get the address to use -
Trying to use PowerMac G4 with HD Cinema Display
I am trying to use a PowerMac G4 Digital Audio with an Apple HD Cinema Display (23-inch). I bought the Belkin connector so I could connect ADC to DVI. When I start up the Mac, I get the startup screen, gray with Apple logo and spinning startup ball, but then it goes dark. Any idea what the problem might be? Could it be a video card issue? Thanks!
If you get something like the linked HP, you will want an upgraded card, minimum of a Radeon 9800 Pro.
The DA can use numerous 4x AGP options, of which the best overall performer is a Geforce 6800 GT (flashed PC version).
The main issue with the HP is the newer 16:9 ratio, for which most old OEM cards have no firmware resolution support (only 16:10 was available in the day).
Use of some software like SwitchresX will be necessary with a newer monitor and older OEM cards.
OEM options are all listed on my page here:
8923D90A-7AD8-41F1-BD1A-FEA5E1780B95.html
All performance options are listed here:
4B4B7BA2-7ABB-47F1-87AC-B03D37942BEE.html
Like Jon said, if you upgrade your graphics card, your DA will love it (and you, in turn, will love the DA more). -
Trying to use old Iphone with IOS 3.1.3 as Ipod
My kids are trying to use an old Iphone Gen 1 as a Ipod. We have successfully loaded music, but now of course they want games. All games need a newer version of IOS. Can I upgrade somehow? Itunes says the IOS is up to date with no opportunity to upgrade.
My kids will thank you!!!Well they are apps and games in the app store which are supported with the iPhone 3G or iOS 3.1.3. Old games of course. BTW remove the sim so your kids cannot make phone calls and send SMS.
-
Using back SPDIF Motherboards outputs with X-Fi Titanium Fatal1ty Pro Series
I have an Asus Rampage Formula that comes with Digital Coaxial and Toslink outputs and a PCI-E sound card, Supreme FX II.
I was able to use both back SPDIF outputs with out any cable, you the card in the PCI-E slot, but I have change my card with a X-Fi Titanium Fatalty Pro Series, no im not able to use any of those outlets, im used the the Coax to my Home theater and the Toslink to me headphones.
Now I can only use the Toslink of the digital output of the X-Fi with my headphones but im not able to use the ports of the mobo to my home theater, is there a way I can use them? the card doesnt have a Coaxial output and thats the problem.
Also, my mobo has 4 pin SPDIF output port, so you can connect something there, but it seems that there are any cable from the output port of the mobo to the audio card....
I found this but Im thinking it might not work...
http://cgi.ebay.com/ASUS-COMPUTER-MB-ACCESSORY-SPDIF-OUT-COA-OPT-4pin-SPDIF_W0QQitemZ3504993780QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item3504993780&_trksid=p3286.c0. m4&_trkparms=72%3A234%7C66%3A2%7C65%3A2%7C39%3A%7C 240%3A38%7C30%3A%7C293%3A%7C294%3A50?
Any help will be really appreciated!
Thank You!? -
Trying to use a Nano with 10.2.8
Alrigth, I just bought an iPod Nano. On the car ride home, I see that you need 10.3.4 to use it. I can't get that unless I buy a new computer... which isn't gonna happen. I have an iMac G3, 10.2.8,iTunes 6.0.1, and a highspeed 2.0 USB. Can I use the Nano with these settings? Do you know for sure?
Please reply A.S.A.P!
ThanksAlrigth, I just bought an iPod Nano. On the car ride
home, I see that you need 10.3.4 to use it. I can't
get that unless I buy a new computer... which isn't
gonna happen. I have an iMac G3, 10.2.8,iTunes 6.0.1,
and a highspeed 2.0 USB. Can I use the Nano with
these settings? Do you know for sure?
Please reply A.S.A.P!
Thanks
I'm using just this configuration. The only problem I have is the dreaded "Do not disconnect" message which never goes away. I wait to be sure all downloads are done, then eject the nano, and everything is OK. -
Trying to use flex pitch with logic pro 9 session in 192k crashes program
i try to use flex pitch with a previous logic 9 session and and soon as i switch to flex pitch it just crashes no matter what session i bring up in 192k, i dont have any 96k files to test but is flex pitch non-caompatible with 192k sessions
JofishSamuel wrote:
Okay? Sorry, I have no experience with .mid files as I've never exported or imported them or moved them before... or even highlighted one before!
Two ideas, have your friend check and make sure the mid file plays on his/her system.
and/or
If the mid file checks out good on his/her system have them compress (ZIP) the file and resend as it could have become corrupted during transfer. It can happen.
Your description of the file (zero length) sounds like it missed the last few bytes.
pancenter- -
Getting an error message while trying to use a ZTABLE with TABLES statement
Hi All,
I wanted to use a ZTable with the TABLES statement, but it is throwing an error saying " Ztable must be a flat structure. you cannot use internal tables, strings, references or structures as components."
What might be the reason for this error??
Thanks in advance.This Ztable, is this a transparent table (structure) or is it a table type?
In case of table type, you should use USING or CHANGING parameter.
Might be better to paste part of your code here, and do not forget to tell how this Ztable is defined (Data dictionary or even local type). -
Trying to use olite35.jar with JDK1.1.8
Hi,
I'm using the olite35.jar in a piece of code that compiles but won't run under JDK1.1.8 When I attempt to run the code I get the following:
Exception occurred during event dispatching:
java.lang.UnsatisfiedLinkError: no oljdbc35 in shared library path
at java.lang.Runtime.loadLibrary(Compiled Code)
at java.lang.System.loadLibrary(System.java:561)
at
at SelectUser.SelectUser_WindowOpened_Interaction1(SelectUser.java:149)
at SelectUser.SelectUser_WindowOpened(SelectUser.java:139)
at SelectUser$SymWindow.windowOpened(SelectUser.java:106)
at java.awt.Window.processWindowEvent(Window.java:385)
at java.awt.Window.processEvent(Window.java:364)
at java.awt.Component.dispatchEventImpl(Component.java:1812)
at java.awt.Container.dispatchEventImpl(Container.java:946)
at java.awt.Window.dispatchEventImpl(Window.java:509)
at java.awt.Component.dispatchEvent(Component.java:1744)
at java.awt.EventDispatchThread.run(Compiled Code)
Library? "oljdbc35"? Can anyone help?
Regards,
TobinAlrigth, I just bought an iPod Nano. On the car ride
home, I see that you need 10.3.4 to use it. I can't
get that unless I buy a new computer... which isn't
gonna happen. I have an iMac G3, 10.2.8,iTunes 6.0.1,
and a highspeed 2.0 USB. Can I use the Nano with
these settings? Do you know for sure?
Please reply A.S.A.P!
Thanks
I'm using just this configuration. The only problem I have is the dreaded "Do not disconnect" message which never goes away. I wait to be sure all downloads are done, then eject the nano, and everything is OK.
Maybe you are looking for
-
I plugged in my ipod (60gig) and I got the message that no disk found. I installed the lastest ipod software, still same prob. I then reset the ipod and same problem I uninstalled itunes and reinstalled it and it worked for a couple of hours and then
-
Server Enforcing Different Password Rules than Set in Exchange Management Console
I maintain a Windows SBS 2008 server for 8-10 users. One of my users recently tried to connect their lumia phone via active sync. When they do so, the server is requiring a complex password even though my exchange settings show Require alphanumeric
-
Invoking-sp-modaldialog-in-sharepoint-2013-hosted-apps
Hello All, I'm building a SharePoint 2013, SharePoint Hosted app project using the JSOM api. I have to make use of the SP.UI.ModalDialog to popup some content in the app. I have used the getScript method to load the sp.js, sp.runtime.js and SP.Reque
-
TS1702 App not appearing in open with menu
Has anyone found apps not appearing in the open in menu
-
Where is my movie I downloaded on my iPad from itunes
I downloaded a movie from iTunes on my iPad 3rd gen for the first time. The download is complete but I cannot find it anywhere.