Trying to use the same ground for more than two channels (RSE configuration) with usb 6000

Hello,
I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
Thank you,
Maria

You're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
Thank you for your time!
Maria

Similar Messages

MDT Console with more then 15 machines, How to use the same drivers for more machines.

Hello,
I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
The Situation:
The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
installation is a network USB key installation (with the deployment folder on the server).
The local USB key exists for offices in parts of the world where the internet connection is poor.
The problem:
We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
computers are using a certain driver.
At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
The Question:
Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
and MDT would not delete the drivers which are still used for the installations of other computers.
Thanks in advance.
Greets,
Arie

Arie,
I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
Ask yourself:
- how long am I going to support model x
- how many times do I want to update drivers
With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
to be 5 years ago.
Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
Good luck! :)
If this post is helpful please click "Mark for answer", thanks! Kind regards

Use of same iTune for more than one iPod

I need to find out whether I can use the same itune in one computer for more than one iPod nano and one iPod video?

I looked at the article, but it doesn't help me know how once I have downloaded onto a nano, for example, the itunes knows that the next thing I connect is something different. My son hooked up his 20GB ipod last night after updating his sister's nano and now the itunes thinks his ipod is a nano. How do I get the itunes to recognize his ipod as the 20GB it is?

How to use the stock locators for more than one subinventory

Hi,
We are working in Oracle Applications 11i.
We have 4 different inventory organizations. Each with one main subinventory. One of those inventory organizations MWN has a subinventory defined with stock locators. The other three have their subinventories not defined with stock locators.
Now, correct me if I'm wrong please, I cannot define a stock locator for an existing subinventory while there are onhand items in that subinventory.
So, We will define new subinventory(for each inv org) with stock locators and then do a subinventory transfer to the new relevant new subinventory organization.
The next point is: the user requests to use the same stock locators for the 4 inventory organizations. is this possible?
thank you...

We had the same issue recently.
Users wanted same locator in the same org under different subinventories.
We suggested 2 solutions
1) Make the 1st locator segment=subinventory name (e.g. East.A.3.10, West.A.3.10)
2) Add a character to the first locator (e.g. EA.3.10, WA.3.10)
They picked up the 2nd option.
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

Can I use the redemption code for more than one machine for Photoshop Elements?

I want to use the Photoshop Elements that I bought on more than one machine. Is that
possible using the Redemption Code? It says it was used with another Adobe ID.
Thanks

Hi Stover,
Typically you use the redemption code to retrieve your serial number for Elements products. The licensing for Elements allows the owner to install on two of their computers.
See these for reference:
Redemption Code Help
How many computers can I install Photoshop Elements on?
Hope that helps,
- Dave

There is a way to use the button enhance for more than one photo at a time?

I have more than a thousand photos to edit, this can help a lot.

This might help:
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone. Does anyone know how I can get my music? I know longer own the iPad so I don't have access to it, but I don't think that should be a problem.

So you had music on the iPad that is not in iTunes and you no longer have the iPad. Is that what you are saying? If that is what you are saying, iTunes won't "recognize" anything that was on the iPad, that was not purchased from iTunes. If the music was purchased from iTunes, you should probably be able to download it again for free as long as you are using the same Apple ID that you bought it with. Did you try downloading the music again?
Am I understanding what it is that you want to do? If I am understanding you correctly, you will find this to be useful.
Downloading past purchases from the App Store ... - Support - Apple
I admit that I'm a little confused by your remark about being logged into your iPad account. You should be logged into your iTunes account.

I am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me

i am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me

You can redirect <Profile>\<AppData>\Apple Computer\MobileSync\Backup to a folder on another drive using NTFSLink (shell ext., might only work on XP) or Junction (cmd line tool).
In essence you move the existing folder to a new location, create an empty folder where the old one used to be, then get the operating system/tool to link the two togther and silently redirect any file operation on the old location through to the new one.
tt2

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

Do I use the same password for apple ID and for iCloud?

I am not getting mail on my iphone or my ipad air!
When I put the password for my apple ID into icloud- it keeps reverting to another password. i.e. doesn't hold the apple ID password.
Is this a problem keeping the mail from getting to my phone and ipad?
DO I USE THE SAME PASSWORD FOR APPLE ID AND ICLOUD?
Help. and MERRY CHRISTMAS

What are you trying to do when you say "When I put the password for my apple ID into icloud- it keeps reverting to another password"?
Where are you doing when you try to enter your password?

I want to use the same name for my icloud email address as my .mac name

My name for all of my yahoo, gmail, .mac email accounts are al the same. I'd like to use the same name for my icloud account. It tells me that the name is not available but I'm pretty sure no one else would have chosen it. Is the fact that I've used it for my .mac email address somehow blocking it's availability? Please help. Thanks.

There is some confusion in my mind about your post. Let me describe what I think you mean, let us know if I misunderstood...
I'm assuming you already have an Apple ID that you used to define an iCloud account (or an older dot mac account), and the iCloud account has "[email protected]" as its email address. But the Apple ID for this account is not the same as the email address I just listed, perhaps your apple ID is something like "xyz@???.com" and what you want is to use the ID, "mySpecialName@???.com". [the "???" could be mac, icloud, or something else]
If I've got it right so far, then when creating a **new** Apple ID, you must now use @icloud.com. If you are trying to define "[email protected]", then that is the problem - "mySpecialName" is already associated with @icloud.com, because your current @mac.com also has [email protected] as an alias, so that name is no longer available.
Also, you cannot change the current ID from "xyz" to "mySpecialName" on an existing account. So either way, you can't get the ID that you desire.
Let us know if this is not what you mean.

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

Hi I Pant,
The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
What is "your device"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Is possible to execute the same executable vi more than 1 time (like notepad, for example)?

I have a Labview executable file that use serial ports to communicate with other devices. I need to execute the same "file.exe" more than 1 time, to control different devices simultaneously. When I double click on an executable been executed (from windows explorer), the file under execution comes to front. Is possible to execute the same file more than 1 time (like notepad, for example)?

Not the answer you are looking for I know..but still: Copying the application to another location is one possibility...if it has a different path it will execute separately.
(OR - build control of multiple devices into one and the same application... If you do not want to redesign the code to handle multiple instruments in the same VIs, you could clone the VIs within the same application...)
MTO

In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

Yes but the iPhone chargers will struggle to charge the iPads ,they need more power than the iPhone chargers produce and with an iPad will charge VERY slowly
The iPad chargers whether 10w or 12 will happily charge all your devices and Apple confirms the compatibility on the relevant web page.

Trying to use the same ground for more than two channels (RSE configuration) with usb 6000

Similar Messages

Maybe you are looking for