Trying to view WIFI password in Keychain Access and asking for administrator' name and password?

This is the first time this happen and I had never have this problem before when using Keychain Access.
I try using my current password but it doesn't accept.
I try using the Keychain First Aid and it didn't work either.
Note: I had change my login password a 2 weeks ago, but I try using the old password to and and didn't help either.
My OS 10.9 Maverick.
Any ideas what's happening here and how to fix this problem?

It's normal.

Similar Messages

Trying to delete wifi certificate in Keychain Access; continually crashes

Every time I try to delete my wifi certificate in Keychain Access, it continually crashes. Tried it in safe mode, still crashes. I cannot get my Airport extreme 5th gen to pass along an IP address to my Mac even though mac is connected to AE (seen via Network Utility). Thought that deleting keychain password would help.
OSX 10.10.1
retina Macbook Pro 13

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How to view wifi password on osx 10.8.2

how to view wifi password on osx 10.8.2

The following assumes you have been able to join the network previously and the password has not been changed since the last time you were able to.
Go to the Keychain Access application (found in /Applications/Utilities) and open it.
In the Keychains column on the left select either login or your user's short name.
Underneath that under Category select Passwords.
Double click on the name of your network.
Under the Attributes tab check the Show password checkbox.
Enter your computer's login password to authenticate and click Allow.
The password will appear next to Show password.
If you have never logged into the network, you'll need to find out how to login from the wifi router's documentation.
Best of luck.

Keychain Access and password problems

Simply stated, I can't save my mail passworld to the Keychain - tried clicking the "Save to Keychain" box (so Mail/Entourage asks me for my mail password every time) -
Thrashed around in Keychain Access and tried First Aid - Verify and got:
Verification started
Checking keychain configuration for Perry & Jodi Collier (user ID=501)
Home directory is /Users/pezjode
Error: unable to communicate with the “securityd” process. Please restart your machine and try again. If this does not correct the error, you may need to reinstall the system software.
Verification failed
What is the "securityd" process? Any help on any of the above would be much appreciated!
I seem to have had a lot of trouble with my system post 10.4.9 upgrade - very annoying.
Cheers
PowerBook G4 17 Mac OS X (10.2.x)

Thanks for that, I deleted all references to keychains in /Library and logged back in, added a keychain for my username and all is now well.
However, I've just started using MS Entourage (as the Mail program was also freaking out like Safari) and it seems that when I tell this application to save my mail password to the Keychain, it throws a spanner in the works...
Might start a new thread on this one...
cheers

Please Help With Keychain Access and Safari Passwords!

Hello,
I would like to take advantage of the capabilities that Keychain Access has to offer... I like how it can store passwords from websites. I have stored several website passwords in Keychain Access and currently have it set to where it asks for my keychain password when first opening Safari, and then it automatically fills in my passwords that are stored in Keychain Access in the corresponding websites. However, when I close Safari completely, the next time I open Safari it already has my passwords filled in, without asking for my keychain password. The only way I have found to make Safari ask for my keychain password every time it is opened is to select "lock all keychains" in Keychain Access. It is a pain to have to open Keychain Access every time I close Safari in order for Safari to ask for my keychain password again. Is there a more simple way to make Safari ask for my keychain password everytime I open Safari?

Hi, okwildthing. Welcome to the forums!
Try this:
Open Keychain Access and find "Safari Forms AutoFill" in the list. Double-click it and go to the "Access Control" tab. (You may need to enter your keychain password at this point.) Remove Safari from the "Always allow access by these applications" list. Press "Save Changes."
Does this get Safari to do what you want it to do?

Keychain Access and Certificates?

I was looking for information on a password manager and remembered that Apple has Keychain Access as part of the OS.
I am trying to understand how it works and only find the Help files available for reading. I am missing a somewhat deeper overview and understanding, not just a list of 'how to ...' instructions.
Can anyone point me to articles or documentartion to help understand this application?
While poking around in Keychain Access, I noticed 175 unique certificates on my Mac under the Keychain called 'System Roots'. I looked at the information on several and am unable to interpret the information, nor the Trust settings available. Also, the Certificate Assistant options available for Viewing and Evaluating Certificates.
My biggest concern is that I do not recognize most of these certificates, and do not understand how they got on my computer, and what happens if I remove them?

Thanks - I looked at several of the links, but I'm not a software engineer.
I'm looking for documents that are geared to a user of the product (OSX), to help me understand all the things I see when opening up Keychain Access, and understand what they do, and a layman's description of the certificates and what happens if I delete them.
Also, a brief overview of the keychain and how it is used, how it is useful, etc.
Just can't seem to find the user oriented documentation...

Since upgrading to OS 10.8.5 login keychain corrupted keeps asking for password for OSX, mail and Safari. Solutions?

Ever since upgrading to OS 10.8.5 login keychain corrupted; keeps asking for pasword tor OSX, mail and Safari. Help!

Have you tried opening Keychain Access and running Keychain First Aid (under the Keychain Access menu) on the login keychain?

HT1414 I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday. The security lock have never been enabled. After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD! ?????? APPLE, what programming subrouti

I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday. The security lock have never been enabled. After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD! ?????? APPLE, what programming subroutine is forgotten during functional testing prior to release of the latest iOS upgrade???? - Now from a borrowed hotel guest computer I post my ”HELP NEEDED”. Please advice if there is a way to skip a security kode I never enabled (nor even tried out and diabled) – WITHOUT spending time to find a Apple store helpdesk that restore via iTunes, and delete all my local data.
Reg
SpannishFLY

During the setup of iOS 7 which you went through after installation it asked if you wished to create a passcode. It is possible to skip setting up a passcode at this step but you must have created one.
If you can't remember the passcode and you have enabled "find my iPad" you can use http://www.icloud.com/ to remote erase your iPad, then you can set it up again, and restore it from an iCloud backup.

HT1766 I have restored my i phone 4 and trying to restore from the back, but it is asking for the password, but when I entered the Itunes password it is not accepting it, how can I restore the password?

I have restored my i phone 4 and trying to restore from the back, but it is asking for the password, but when I entered the Itunes password it is not accepting it, how can I restore the password?

Hello hskod,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting encrypted backups
http://support.apple.com/kb/TS5162
You can keep trying to restore the device from backup until you remember the password. If you're having trouble, try:
Leaving the password field blank
Your Apple ID password
Your computer account password, if you have one
Email passwords you may have used
Your Wi-Fi network password
Website passwords you may have used
A password for hard-disk encryption software, if you use it
Have a nice day,
Mario

When I try to install flash player on my mac, I get to the panel that asks for my name and password, and it will not take my password. tried changing to a new password and same result

When I try to install flash player on my Mac, I get to the panel that asks for my name and password, but it will not take my password. Tried changing the password, but same result. Suggestions??

This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.

I'm trying to install the os x but I got the point where its's asking for "administrator password". How do I get that password?

I'm trying to install the os x but I got the point where its's asking for "administrator password". How do I get that password?

That password should be the one you used on the system *before* you do the upgrade.
If you got the computer used from someone else, you need to get in touch with them and get the password.

HELP! my mac has logged me out and now asking for a name and password?

I was logged on shopping on top-shop online and suddenly the mac shut down.
It seems it has reset its self! My icon has disappeared and its now asking for a name and password.
i have tried my log in but it is not working.
Is there another way to reset the password?
can i reset it to log back in what can i do?
I have rebooted the computer several times but i dont know what to do!

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

POP3 -Keep asking for user name & Password

Hi,
We have exchange 2003 server with Service pack 2. We have user who check their mails through Outlook 2003, Outlook web access & some users are using POP3 to download the messages.
Since last few weeks, we are getting the complained that when engineers are trying to configured users account in Outlook with POP3 configuration, its keep asking for user name & password. But with same user name & passwords user is able to check their mail through Outlook web access.
In some of our site, users are able to download messages through pop3 account but this account was configured long back.
Kindly advise.

HI,
This is happening mainly when
1. user changed his password through Outlook web access next time its keep poping up for password & it will not accept the new passord.
2. if user is using OWA & when we try to configured his mail in Outlool with POP3 .
See if i remove exchange attributes from user's account & then delete the users from AD & Recreated with same user name, Password & reconnected to that user to his old mailbox, it;s work fine.
Regards,
Chetan
POP3 is enabled by default for all the users.

HT204053 I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

My iPad has suddenly lost my camera and FaceTime apps. I've tried to go into the restrictions however it is asking for passcode I never set up. Then I've tried to do a reset but it to is asking for a passcode that I never set up.

MY iPad has suddenly lost my camera and FaceTime apps. Yes I've tried to modify in the restrictions however it is asking for a passcode that I never set up. I've also tried to go and reset my iPad but it to is asking for a passcode. Yes I've tried any passcode I've ever used. And I can't get anywhere. Help!

iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Follow the section for recovery mode restore.

Trying to view WIFI password in Keychain Access and asking for administrator' name and password?

Similar Messages

Maybe you are looking for