Trying to work with my speakers sort of weird

ok what I am trying to accomplish is using the internal speakers as the audio source for my web show. I don't want to use the built in mic to get sound because then there is background noise.

There's not enough information.
I understand what you're saying but several things aren't clear.
What are you playing through your internal speakers that you want to use as "source" for your web show.
What software are you using?
There are programs that can take the Macs output (what would go to the speakers) and route it to different outputs (or inputs)
Is this something that would help?
http://www.cycling74.com/products/soundflower
pancenter-

Similar Messages

When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei Soloviev

Hi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
>

My iPhone no longer works with external speakers

Since upgrading to the 3.0 software, my iPhone (the original 2G model) no longer works with the speakers I have, or with my DVD/surround system. Previously it worked fine! Has anyone else experienced this. I'm so disappointed, as I use the speakers/surround system a lot to listen to music.
If anyone could help, I'd greatly appreciate it

OK, I just clicked restore to backup in itunes and after restoring the iphone, it seems to be connecting and working through the speakers now. Whew!

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder.

I'm on OX X and am trying to work with iMovie 09. It keeps crashing every time i open iMovie. Any suggestions?

I'm on OX X - version 10.9 and trying to work with iMovie 09 and it keeps crashing...any suggestions?

As a first step, you may want to try deleting iMovie preferences.
AppleMan1958 outlines the steps in his excellent User Tip here:
https://discussions.apple.com/docs/DOC-4061
Matt

HP 4330s SRS Premium Sound not working with External Speakers

And this is my second topic and rant!
The SRS Premium sound driver doesn't work with USB Speakers.
It doesn't work with Bluetooth speakers either!
In other words it only works with the Laptop speakers.
ARE YOU KIDDING ME!
SRS Premium sound for Deeper Bass and Clear sound enhancement bla bla bla now in you HP Laptop
but ONLY with your LAPTOP SPEAKERS!
ARE YOU KIDDING ME!
DEEP BASS on these cell phone speakers!!! Really???
Why doesn't the SRS Premium Sound driver work with external speakers!
I believe I have used SRS Sandbox before and ALL THE SOUND was directed to that driver and it worked with everything!
WHY DOESN'T YOUR HP DRIVER WORK WITH EXTERNAL SPEAKERS!
Is everyone in HP a bloody RETARD?
FIX YOUR DRIVERS!
End of rant!

Oh BTW {Content Removed: rant} http://www.srslabs.com/landing.aspx?id=693#23
23. Will the SRS Audio Sandbox work with my USB speakers or Bluetooth speakers?
Yes, the current version, 1.6.6.0 will work. If you have a previous version that is not working with these speakers, please upgrade to this version.
Do you have anything else to share with me {Content Removed: rant}

Will the new 8Gb nano work with these speakers?

I bought a set of intempo speakers last year for my first generation 1Gb nano. I bought the new 8Gb nano last week and want to know if it will work with them. The manufacturers website with technical specs is below,
http://www.intempodigital.com/ids01.htm

The new nano comes packaged with it's own 'dock adaptor'. It's a #13 dock adaptor in case you're interested.
I don't have the speakers you mentioned, but I have an iPod hi-fi and I removed the dock for my 30GB 5G iPod and inserted the #13 dock for the new nano and it is a very nice fit- the click wheel sort of disappears in the hollow of the dock a little- but other than that it fits well and the nano doesn't wobble around at all.
The new nano fits fine on my iPod hi-fi- it sits in almost perfectly upright on the connector. It looks like it should tilt back a little when you look at the angle of the connector on the speaker. Maybe try holding the nano very upright- it doesn't need to be forced on. Took me a few turns to get the angle correct.
Good luck.

5.1 sound won't work with computer speakers, not sure

Hi, I am having problems getting 5. surround sound to work with my SB Li've! 5. card and Cambridge Soundworks DTT3500 Dolby Digital system. The speaker system works fine, I've tested it with my DVD player through an optical cable hookup. The Dolby Digital light is supposed to light up when its receiving a Dolby Digital 5. signal, and when connected straight to the DVD player via optical cable, it does light up.
But, when connected to my Li've! 5. card, it does not light up. I am using CyberLink PowerDVD which supports 5. sound, and I'm using the Digital DIN port in the back of the speaker system. The cable goes from the orange digital out port on the SB Li've! 5. card to the Digital DIN port on the Cambridge speaker system. The hook up should allow transmission of 5. signal, so maybe something is wrong software side. I might be missing a setting or something, on the player maybe or elsewhere. Any help would be greatly appreciated, thanks.

I have been in the computer repair business for over years and work on main frame computers for the government and there are companies that back their products and there are companies that do not. Creative, in my opinion, is not a company that likes to back their hardware or software drivers. I remember in the old Sound Blaster 6 days of DOS and conflicting IRACs and not getting any help with their auto answer service. In my opinion, one of the reasons they have all this software driver issues, is they more than likely use another source to write the software and therefore the software writers do not talk to the hardware developers. Believe me this is very common as I see it all the time with the government contracted computer companies and their special software. What a mess. If? software developers do not talk to their hardware people on known issues then we get the results. Part of the problem is us consumers and our willingness to except anything when it comes to computers. I read of people staying up all night trying to resolve one little issue and will still except a degraded product. Do not think for a second these companies do not know this and use this backwards stupidity to their advantage. I would never give any computer product that much of my time because my time is money as well.
Anyway, why do we all buy Creative? The answer is very simple. If you have ever herd the newest X-Fi sound cards with its 24 bit crystallizer on a motherboard it likes, well there is nothing like it. I have mine (I own this sound card as well) hooked up to a high end stereo and if my wife would let me I could blow out my windows in my study. That is when it is working and not squealing. The problem of course is we must get this wonderful sounding card on a computer it likes to work without squeaking or squawking. Lets face it, Creative is the only game in town when it comes to sound and I love great sound. shellback

IDVD freezing when trying to work with old project

I am running iLife '09 and OS X 10.6.2. I burned this project successfully in the past 12/09 after creating it, however trying to burn and work with the project after some changes and iDVD will freeze or give me a grey screen and crash. Where can I look to see the cause of this? Crash Reporter has no logs of the events.
cheers!
James

Hi
There is a bug in iDVD'09 (at least)
If You make an iDVD project
Then go back to Your movie and make a small change
Then open iDVD again - it will notice this and say to Update or Cancel
NEITHER of them works.
ONLY one medicine - Make a brand new iDVD project and re-import Your movie.
Sorry - Non has come up with a more elegant solution. (at all)
Yours Bengt W

There are errors on the Tuxedo-client (ULOG) while trying to work with Serv

Hello,
What we have:
1. Tuxedo-server 8.1. (HP-UX)
2. Tuxedo-client 9.1 (AIX 6.1)
3. Java-program
4. C-library which is supposed to work with tuxedo service (server side)
and what we want:
1.Java-program loads C-library using JNI and tries to communicate with Tuxedo service on server side.
2. We get ULOG file on tuxedo-client side with errors which are after tpsend function. Program finishes after time out.
3. We do not have JOLT system installed.
Here are the errors from ULOG-file:
114055.puma!AIX2C2TUX_stain.860250.515.0: 01-19-2011: Tuxedo Version 9.1, 64-bit
114055.puma!AIX2C2TUX_stain.860250.515.0: LIBWSC_CAT:1332: ERROR: Unable to set mode to NONBLOCK
114055.puma!AIX2C2TUX_stain.860250.515.0: LIBWSC_CAT:1085: ERROR: Unable to get reply to unsolicited message request
114055.puma!AIX2C2TUX_stain.860250.258.0: LIBWSC_CAT:1332: ERROR: Unable to set mode to NONBLOCK
114055.puma!AIX2C2TUX_stain.860250.258.0: LIBWSC_CAT:1085: ERROR: Unable to get reply to unsolicited message request
114055.puma!AIX2C2TUX_stain.860250.1029.0: GP_CAT:1241: ERROR: An error occurred in the encryption subsystem code(60)
114055.puma!AIX2C2TUX_stain.860250.1029.0: LIBWSC_CAT:1512: ERROR: Unable to generate first diffie-hellman packet
114055.puma!AIX2C2TUX_stain.860250.1029.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
114055.puma!AIX2C2TUX_stain.860250.1029.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
114055.puma!AIX2C2TUX_stain.860250.1029.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
114055.puma!AIX2C2TUX_stain.860250.772.0: GP_CAT:1241: ERROR: An error occurred in the encryption subsystem code(60)
114055.puma!AIX2C2TUX_stain.860250.772.0: LIBWSC_CAT:1512: ERROR: Unable to generate first diffie-hellman packet
114055.puma!AIX2C2TUX_stain.860250.772.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
114055.puma!AIX2C2TUX_stain.860250.772.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
114055.puma!AIX2C2TUX_stain.860250.772.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
I googling for a while but could not get a clue to solve this.
Any help appreciated.
Thanks.
Andrei

Hi Andrei,
First, JNI loading the Tuxedo client libraries is not supported by Oracle. That isn't to say it won't work, it's just that Oracle won't support you. What you are trying to do, access Tuxedo services from Java, is exactly what Jolt is designed to provide and is the Oracle supported way to do this.
That being said, my guess is that the JVM process environment is somehow restricting what the workstation libraries can do with the network as you are getting fundamental networking errors. How you work around this I can't really say.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

My audio on face time won't work with external speakers plugged in

I have a fairly new iMac. My husband bought me some Bose speakers and when I try to face time with the speakers plugged in I do not get any audio.

Facetime has not been available on iPads purchased in the UAE for years.
Although Facetime can work in the UAE on devices which do have it I don't know why you have not been able to use it in iOS 7.
See here:
http://support.apple.com/kb/ts3367
http://support.apple.com/kb/ts4268
http://support.apple.com/kb/ht4319

Will lightening adapter work with bose speakers

Has anyone tested this out yet?

My Iphone 4s does not work with the first Bose bluetooth. It also doesn't work with a Bang & Olufsen

Airplay doesn't work with my speakers or Apple TV after upgrade to Mavericks

Hello
I upgraded to Mavericks yesterday, thanks for the free of charge OS. Before upgrading my MBP Retina ran Mountain Lion which was perfect
Today I tried to route sound through my airplay speaker, but the mirroring doesn't work. Tried routing the sound to my ATV2, same thing. When I go to System settings->Sound, all the gadgets do show there, but when I click on them the highlight bar stays on the device I try to choose only for as long as I keep the mouse button pressed. As soon as I release, the highlight bar jumps right back to the inner speakers of the notebook.
I saw a thread where people complain about the missing airplay buttons and missing devices, but here everything seems to be in place, only the feature doesn't work at all no matter how many times I restart
Has anyone encoutered the same, fix available?

I had the same problem.
I just restarted my Apple-TV.
Worked for me.

Problem when tried to work with jstl

i have downloaded standard tag library and copied the
jakarta-taglibs/standard-1.0/lib file into /WEB-INF/lib as said in
http://java.about.com/od/beginningjava/l/aa_jstl_intro_2.htm
and tried to execute hamsandwhich.jsp which is as follows
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
Setting the value: "Hello World!"
<c:set var="hello" value="Hello World!"/>
<p/>
<c:out value="${hello}"/>
i get an error
org.apache.jasper.JasperException: This absolute uri (http://java.sun.com/jstl/core) cannot be resolved in either web.xml or the jar files deployed with this application
but i dont know how to check with web.xml since i dont know xml
here is my web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
</web-app>someone kindly help me with this.........

hi, my problem is bit diffrent.
i m trying to achieve a login procizer in JSP and using JSTL c and sql library. MySQL as database solution.
most of the things are working fine but i want to add confirm password in registeration form. and i do not know how to compare two string.<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<c:if test="${param.submitted}">
     <c:if test="${empty param.name}" var="noname" />
     <c:if test="${empty param.pw}" var="nopw" />
<c:if
test="${not (noname or nopw or requestScope.takenName)}">
<c:set value="${param.name}" var="name" scope="request" />
<c:set value="${param.pw}" var="pw" scope="request" />
<c:set value="${param.cpw}" var="cpW" scope="request" />
<jsp:forward page="doRegister.jsp" />
     </c:if>
          </c:if>
<html>
<head>
</head>
<body bgcolor="FCDBE4" >
<form method="post" name="frmRegister">
<input type="hidden" name="submitted" value="true"/>
<script type="text/javascript">

     </SCRIPT>
<p align="left"><b> Register <hr> </p>
<p align="center"><b>Please complete the following registration form</b> <hr><br><br>
<img src="dmu.jpg" alt="DMU University" align="left">
<img src="dmu.jpg" alt="DMU University" align="right">
<table BORDER="0" ALIGN="CENTER" VALIGN="TOP" CELLPADDING=2 CELLSPACING=0>
<tr>
<td><Strong>Username</strong></td>
<td><input type="text" name="name" value="<c:out value="${param.name}" />"
/>
</td>
</tr>
<tr>
<td><Strong>Password</strong></td>
<td> <input type="password" name="pw" value="<c:out value="${param.pw}"/>"
/>
<tr>
<td><Strong>Confirm password</strong></td>
<td> <input type="password" name="cpw" value="<c:out value="${param.cpw}"/>"
/>
<tr><td>�</td>
<td><input type="submit" value="register"LANGUAGE=javascript onclick="return add_onclick()" />
</td>
</tr>
</table>
<img src="dmu.jpg" alt="DMU University" align="left">
<img src="dmu.jpg" alt="DMU University" align="right">
</form>
</body>
</html>doRegister.jsp
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<sql:setDataSource
     dataSource= "????"
     scope="session"/>
<sql:transaction isolation="serializable">
     <sql:query var="result" >
          select username from rptable where username=?
          <sql:param value="${requestScope.name}" />
     </sql:query>
     <sql:update>
          insert into rptable(username,password) VALUES (?,?);
          <sql:param value="${requestScope.name}" />
               <sql:param value="${requestScope.pw}" />
     </sql:update>
</sql:transaction>
<c:set var="user" scope="session" value="${requestScope.name}" />
<jsp:forward page="prelogin.jsp"/>both script is working but when i try to not confirm password still it goes to the database because i do not use anythinh which compare them ad then if yes then go inside or give a error message.
can anyone help me to do this..
thanks in advance.

Itunes only works with 2 speakers out of 4 speakers

I have a Soundblaster Audigy on a Pentium 4 with 2.4 Ghz. PC with 2 gigabytes of memory and can only get sound out of 2 speakers out of a 4.1 speaker system. I have tested all 4 speakers and they work fine. The speakers are Cambridge Soundworks. The audio output works fine in games with all 4 speakers and also works fine when playing music in Windows Media Player 10. I have contacted Creative who makes the Soundblaster Audigy and they say the problem is with Apple Itunes since I do not have problems with other applications. Please help and thanks in advance.

My guess is your setup is wrong. On my 5.1 system, I get sound from all the speakers, including the rear ones.
Open the Quicktime control panel, and click the Audio tab. Make sure the "Channels" pulldown matches your current speaker setup.
Also, in the "Sounds and Audio Devices" control panel, on the "Volume" tab, click the "Advanced" button under "Speaker Settings". Make sure the Speaker setup pulldown matches your current speaker setup.

Trying to work with my speakers sort of weird

Similar Messages

Maybe you are looking for