Trying to work with .svg file

I downloaded an .svg file from wikipedia here http://upload.wikimedia.org/wikipedia/commons/1/1b/Map_of_Virginia_Counties_and_Independen t_Cities.svg
I can open the file and it tells me I don't have the font used but I can't see any of the artwork. Is there something I am doing wrong, I really don't want to have to re-create this if I can use this file. Please help.

That worked, I didn't even think to try that! Thanks so much!!!

Similar Messages

Stuck with svg file !....

hi every user
i stuck with svg file
after import external svg file with layers ( created with adobe Ai ) in An , how can i modify color and strok , path , and also animate that !?... without using any .js

Hi sudeshna sarkar
i tried that , the EdgeCommons is great but Its application to work with Svg files is limited ,i tried to use Snap.Svg and finally found true way .
but have problem here : when i used that without any goal div , work perfectly in every modern browser but make svg file outer of the stage !!! , and with a goal div that work only in FF , IE and stuck in chrome and dont work correctly !!!!
In the annex link i have sent the test files .
i tried everything to fix this but I am stuck and cant find where's the wrong ! pls help me to solve this problem
https://www.dropbox.com/s/w0xwrcx4zz0mbkr/Snap-svg.zip
thanks in advance

How do I use an Edge Animate project with SVG files in InDesign for DPS output?

Is there any way to include an Edge Animate web content using .svg files in InDesign for output to DPS?
Edge Animate works great with InDesign, except for when you're using SVG files. I've worked with SVG files on the web successfully (writing .htaccess files and such), but it seems like InDesign doesn't like them.
This is pretty important because I don't want to have to design multiple renditions on the DPS suite. Currently I have it setup as a PDF format (DPS) and that scales all of the vector-based type perfectly. It would be wonderful if the animations could also be in a vector format so that when the iPad (3) users see the designs, they will scale naturally through the PDF framework.
Any advice would be invaluable.
Thanks!

moved to the DPS forum....

Can Premiere Pro CC work with mpeg files?

I tried to work with *.mpeg files, but can import them into a project.
Can Premiere Pro CC impoert and export mpeg (1, 2) files?

Lucky ...
As shooternz says, yes ... although if you are new, you may not realize that when you start a project, you have to manually "create a sequence" first, THEN you can add clips to the sequence. Until you have a sequence on the timeline, simply dragging & dropping from either the source monitor or project/browser panel to the timeline area will not work. Nor trying add a clip to the timeline either by the properties panel (after right-clicking on a clip) or the top menus.
Create a new sequence on the timeline, then ... you can drag & drop from either the source or project/browser panels, right-clicking on footage and using the property menus, all now works.
Steps to create a new sequence ... "ctrl(cmd) - N" with keyboard to create a new sequence, or in project/media browser panel ... right-click and choose "new -> sequence", or in that panel click on the piece of paper with a folded-corner icon (lower right corner) then choose "new->sequence" or of course, "File->new->sequence" from the main menu bar.
Neil

Working with multiple files in Library module

Hello,
I am trying to work with a subset of files in the Library module. Doing things like delete, rotate, flag etc. I select the files by Ctrl-Click (WXP) and then try to do the function--sometimes it works, other times it may delete or roate the wrong file. How can I get this to work everytime?
TIA,
Tanya

Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel

Working with Multiple Files in Workspace Layout

If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab. Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
Does anyone know how to set the workspace to present multiple files in tabs? I have CS3.

Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel

Working with flat file as source in owb 10.2

Hi,
I am working with flat file as source . While validating the mapping i am getting the following error like
" to specify a data file configure the mapping , add a node under ' Source data file', type in the file name
and select the file location."
Please give me the suggestion . It is very urgent.

Hi Venkat,
I tried the following stepts.
1. in Design Center select your mapping and right click and select configure
2. select sql loader data files and select create
3. On right hand side data file Name : enter your source file name (ex : source.csv)
4. click ok button.
5. open mapping and validate.
The mapping is validating. After validating I deployed the mapping. Up to this the mapping is working fine.
But when I start the mapping, It has completed with errors.
The error message is:
Status
Error Log
RPE-01013: SQL Loader reported error condition, number 1.
LRM-00112: multiple values not allowed for parameter 'control'
Job Summary
Updated : 2009-02-24 15:32:43.0 Job Final Status : Completed with errors Job Processed Count : 1 Job Error Count : 1 Job Warning Count : 0
Please give me the suggestions.
Thanks,
Venkat

Working with big files

I would appreciate any suggestion as to how best one can work with big files. I have eight one hour tapes containing information about various places I visited. Some contain only one place while others can contain two or more places. As a preference I like to create up to one hour DVDs that contain an identifiable segment; eg either one place only or more but I do try not to break up a place and record it on two DVDs. However, the problem I faced in the past, is that by the time I get to the end of an hour, the program Premiere Elements 7 (PE7) is getting slow and keeps telling me that it is running out of memory. That is despite the fact that I have 3 GM of RAM and over 200 GB of dedicated separate hard drive. I tried saving segments under ‘Share’, ‘DV AVI’ and selecting ‘DV PAL Standard’ (the system I use), but the result, as far as quality was concerned, was very disappointing. There is no option to change or set quality as was the case in previous versions of PE. Nor can I combine two .prel files into one while I am editing.
Is there any other way I can work in segments, say 15 minutes, and combine them at the end without losing on the quality?
Any suggestion would be most appreciated.
Tom

Hi Steve
It is a Sony DCR-HC40E PAL, and they were captured as AVI clips.
The project settings are:
General – not highlighted but it shows DV Pal and 25.00 frame/second
Video – 720 horizontal 576vertical (4/3)
Display format - 25 fps Timecode
Capture – DV Capture
Tom

Work with office file (.docx, .xlsx)

Hi!
How can I open/create/save/change any word file? Can I use some library or must write myself?
I known that docx file is archive with xml documents, but how I can change, for ex., some paragraph/text/etc.?
Thanks!

There are no native controls for working with docx files in Windows Store APIs. You may be able to find a third-party control that does this.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei Soloviev

Hi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
>

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

Working with RAW files in PSE9: Doable or better to use PSE12?

I have PSE 9 and will soon get a camera with RAW capability. I notice that Adobe no longer supports PSE 9. Am I in for trouble if I don't upgrade to PSE 12 since I don't know how to work with RAW files? It sounds as if I will need something to convert RAW files? Where do I get it? Is it a big deal for a beginner with no software skills?

You can download a free DNG Converter from Adobe and then convert your RAWs to DNGs which can be used in PSE9.
You don't need PSE12, but if you want to purchase PSE 12, you get the most current features in the Raw processor (which in my opinion is a huge improvement over what is available in PSE9), and you don't need the extra step of converting to DNG.

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder.

Working with RAW files in iPhoto 5.0.4 and Elements 4.0.1

I take photos in RAW mode and download them to iPhoto. When I try to edit the photo in iPhoto, the picture is a tiny little file that is impossible to enlarge with any sort of clarity. Also, the word "RAW" does not appear anywhere on the iPhoto window like I read it is supposed to.
When I drag the file to Photoshop Elements, I get an editing window that has none of the tools usually associated with JPEG files. I get a separate window in which I can darken or lighten the image, that's it.
Clearly, I'm doing something wrong. No one in their right mind would ever use RAW if this is how it works.
Any ideas?

Hi Jack!
If you're new working with RAW files, your right, it just doesn't make sense. RAW <imho> is a bit overrated. One thing you will need to keep in mind when shooting in RAW, is you will still need to take a well exposed image. What RAW files will allow are CHANGES in all areas of the image v. JPEG which may allow you to ADJUST a few settings in the image. My only suggestion would be to kepp playing around with PSE until you get the hang of it, it is an excellent image editing software. But realize, a well exposed JPEG and RAW file are hard to tell apart...
Personally, I do not directly download RAW files through iPhoto but will create a folder and download to here, and simply drage folder to iPhoto to import (which are then 'converted' into JPEG files). This way I have the original RAW images safely located outside of iPhoto as well as in iPhoto. You should set Elements as your choice of application to edit files inside iPhoto.
Good luck, Rick
Good link: http://www.elementsvillage.com/forums/ and just for fun: http://www.photoshopcosmetics.com/index.php

Trying to work with .svg file

Similar Messages

Maybe you are looking for