Trying to wrap a vector image around a tube shaped vector object

What would be the best way to approach this? There are so many options, looking for the one that looks best.
It's a grid pattern around an ice cream cone.
Illustrator CS4.

Turn the artwork you want wrapped around the shape into a symbol (just drag onto Symbols panel). Draw a right triangle with the right angle at the top and the non-hypoteneus sides at the top and one side, then go to Effect > 3D > Revolve…
Click on Map Art, then chose the correct surface and apply the symbol. Rotate and scale as desired.

Similar Messages

I'm trying to take a vector object, say a flower, offset a path then get a vector path around the outside edge of the offset. I take my flower, add a stroke, offset that stroke then select Add from Pathfinder which gives me visually the exact offset peri

I'm trying to take a vector object, say a flower, offset a path then get an independent vector path around the outside edge of the offset.
I take my flower, add a stroke, offset that stroke, then select Add from Pathfinder which gives me visually the exact offset perimeter shape I'm looking for. The problem is that it isn't a vector path in it's own right. Is there a way to get Illustrator to recognize the offset stroke as it's own vector path?
Please forgive me if my terminology is off as I'm not a formally trained graphic artist.

How to create a vector object

hi,
ok my problem is i am trying to create a vector object in jbuilder with this
private Vector<Object> rows;
but i keep getting a error saying generics are not supported in 1.2 try -source 1.5.
how can i create a vector object in 1.2, i am seriously stuck can you please help.
regards

i now got the 1.5 to work without the invocation errors, the whole reason i needed the array is as such
setting array
Vector<Object> rows;
then
public void setauctiondetails() throws java.rmi.RemoteException {
Connection link = null;
Statement statement = null;
ResultSet results = null;
Class.forName(
"sun.jdbc.odbc.JdbcOdbcDriver");
link = DriverManager.getConnection(
"jdbc:odbc:auction","","");
statement = link.createStatement();
results = statement.executeQuery(
"SELECT * FROM auctiondetails");
rows = new Vector<Object>();
while (results.next())
rows.addElement(results.getInt(1));
rows.addElement(results.getString(2));
rows.addElement(results.getString(3));
rows.addElement((results.getInt(4)));
link.close();
for(int i=0; i<clients.size(); i++){
icl = (Iclient)clients.get(i);
icl.updateTime(rows);
but still getting a error with the bloody array saying "type java.util.vector does not take parameters". i no you guys are really good at java, so tried not to have a go just need to be pointed to a tutorial or some code that might explain this better to me.
kind regards

Problem in casting a vector object

Hi friends,
I have stored dates in a vector. The date is as a string(10-08-2001). I have tried to store the vectore object into a variable. But it is displaying StringIndexOutOf BoundsException. the gist of the code is as follow. The vector object displaying its values.
code
a.addElement(rss.getString(1));
a.elementAt(i)
it is displaying value but
(String)a.elementAt(i));
it is displaying nothing
plese tell the reason if you know

Add
System.out.println("Value="+rss.getString(1)); before the add
element - I am not onvinced the error is wth the Vector.

How to wrap an image around a mug in Photoshop CS5?

I have tried many things like transform -> warp or tried to play with 3D but nothing gave me an effect like this image. Does anyone know a good tutorial or would like to explain to me how to wrap an image around a mug and make it look realistic like this?

For Photoshop Elements
Step A
Select the Type Tool, type in your text
.. then look at the top of the
page
You will see an arc with a T over it
Click on that and you will be
able to curve the text
Step B
There are 3 items to consider in order for this project to come out
satisfactorily.
A. The picture of the coffee mug needs to be properly
sized, and enhanced
B. Directions for the text above
C. The picture for application to the mug needs to be
configured so that its curvature conforms. I shall give you directions, but the
values may require adjustment for your particular picture:
Duplicate background layer, and shut off visibility by clicking on its eye
icon
Increase canvas size Image>resize>canvas
size. Uncheck relative. Enter new values for width & height. Try 120% (+/-).
You need more "real estate" for the next steps. The checkerboard pattern denotes
transparency, which you want all around.
Rotate picture. Image>rotate>layer, 90
degrees right
Filter>distort>spherize. Set mode to vertical only. Amount 100%
Filter>distort>shear. Click center of control line, grab this center
handle, and pull just a little to left
Rotate picture back. Image>rotate>layer>90 degrees left
Copy to clipboard, paste on picture of mug. Position and adjust size with
move tool.
Edit: Resolution of picture of mug and of picture to be applied should be about
the same number. You can check this in Image>resize>picture size before you embark on
above.

How do i take a image of a wine glass and wrap a image around it in indesign cs6

How do i take and image of a wine glass and wrap another image around it!

InDesign isn't the correct application for such a manipulation.
If the "image of a wine glass" is a 2-dimensional image, you may be able to create the illusion of something wrapped around it in Photoshop, but there won't be any automatic solutions. Fundamentally, what you're proposing is a function of 3-D modeling.

How do I prevent the Darker Shade Box (color shift) around Vector Objects when Printing

Sorry in advance for the novelette. I am absolutely mystified and frustrated and would love some help! I've been working on this problem for about 30 hours over the last 4 days to figure out what the heck is happening and cannot find an answer through various forms of research.
Basically, when I print a JPEG, I am getting this area (a box) of darker shaded coloring around my heart and love text. I've tested it a million different ways and am at a loss as to what the problem is ... is it an application problem, a color profile problem between my applications and printer, an improper way that I saved my file, etc.
Here is a photo I took of the image printed out (so it is slightly skewed from camera distortion):
The details:
(1) I create graphic art and sell it online. I save all of my printable art as JPEG files because of my customer base (diy hobbyists that print on their home printers without much knowledge base nor graphic design software).
(2) I use both Adobe Illustrator (AI) and Photoshop Elements 11 (PSE11) to design and save my artwork.
(3) I insert JPEG images into Microsoft Word 2003 documents to "test print" since most of my customers use home printers to print. Since most people have this basic software, it is a good gauge of the kind of print out they might get using the same or similar software.
(4) My PSE11 color profile setting is the default sRGB. I have test printed many times and I get the truest colors with this color profile.
(5) My AI color settings are normally also an sRGB color mode, but on occasion, I use a CMYK color mode if I am creating a larger document that I know the customer will need to take to a professional printer to print out.
(6) I do my home printing (for proofs) on an Epson Stylus Photo 1400 (which has the 6 color ink cartridges).
(7) Until this printing problem occurred on this test print out, I always used the "photo enhance" option when I designate settings for my printer via the Microsoft Word documents.
IMPORTANT: This is when I have the color shift?? or color rendering issues?? and it is the only time. If I use the regular ICM/ICC color profile of sRGB, the printing issue doesn't occur. Instead, I have a solid color background instead of this one with the strips of lighter color on the top and bottom. However, I can't control how the customer prints, so I need to feel confident that whatever color profile setting they use, they will not run into this problem. I even test printed the documents over at FedEx and the darker box/color shift did not occur.
(8) The document in question only has 3 sets of objects: the heart, the solid colored rectangle colored background and the text. All 3 objects are vectors, they are at 100% opacity and there are no "special effects" applied.
(9) The image was entirely created in AI this time and exported as a maximum quality JPEG file, although you will see below that I tried many ways to create and save the file so that I didn't have the color band borders on top/bottom.
(10) I regularly use AI for part of my art, then I drag it to my PSE11 open document and it becomes a Vector Object (it cannot by copying/pasting into a PSE11 document). I also regularly export AI images as PNG files, then insert them into an open PSE11 document. This printing issue has not occurred until recently. Here is an example of a very complex AI image I created, then inserted into PSE11 just to add the background (the Teddy Bear and books are AI vector objects) that were exported as PNG files then inserted into PSE11 to integrate with the background image - I test printed with Photo Enhance and had no printing issues:
So, from the research I have done, it looks like it is a color rendering or color space issue with conflicting color profiles in the same document. I checked my color profile settings and both sRGB and CMYK were set to embed ICC color profiles.
I tried changing AI settings to Preserve Numbers (ignore linked profiles) for CMYK, but that didn't work.
I also checked and made sure that not only the document setup showed the sRGB color profile, but that all the objects within the document also were converted to sRGB as well for consistency. That didn't work.
I tried converting the document to CMYK along with the vector objects. That didn't work.
I tried saving the heart image as a PNG file alone, the "love" text as a PNG file alone, both the heart and text together as a PNG files alone. Once saved as PNG files, I inserted them into an open empty PSE11 document - as I normally do. I then added the background color I wanted. That didn't work - the print still showed the color changes.
I tried dragging each vector object separately and even as a group and got the same color change issue when printing.
I tried "expanding" and "outlining" the text before exporting as JPEG, before exporting as a PNG and before dragging as a vector object into PSE11. Expanding the text did not help the situation.
I tried exporting as Adobe PDF, then opening in PSE11, then resaving as JPEG. That didn't work.
I tried flattening transparency (even though there is no transparency in the AI file). That didn't work.
I tried rasterizing the image. That didn't work.
Thinking that the file might be corrupt, I started from scratch and redesigned the same heart and love text. Unfortunately, I had the same problem as before. At this point, my AI started becoming buggy and would not open new files. It happened repeatedly and I decided it was best to uninstall and reinstall AI (and maybe that would fix the problem).
I created just the heart in AI, then inserted it into an open PSE11 document (both after exporting as PNG and also by dragging as Vector Object from AI). It seemed to work. I could both drag the vector into PSE11 from AI and export from AI as a PNG, then insert into open PSE11 document with a background color - and it printed a solid background.
So, I thought that reinstalling and setting back to defaults worked. But, then I added the love text around the heart and tried exporting as JPEG files and the same problem continued to recur. Whether I dragged as a Vector object into PSE11 (the heart object and love text separately and also another time with the vector objects dragged as a group) or saved them as PNG files and inserted into PSE11 - I got the different shades of color on what should be a solid background. I even tried saving the PSE11 as a PSD file first, then resaving as JPEG and I tried saving as PNG and printing and this didn't help solve the problem.
I really think it is some color conflict issue but I can't figure it out. I am definitely not very knowledgeable about color profiles and how to sync all my devices, however, as I mentioned, this was not an issue until recently (and I think??? I recall changing the CMYK setting from Preserve Numbers to embed color profile a month or so ago - however, it should have been solved when AI went back to its defaults upon reinstall).
The reason I believe it is a color rendering/color space issue is because I could see the color output when I saved the JPEG with CMYK color profile versus sRGB color profile and the sRGB colors were much richer, not surprisingly. The top and bottom colors matched the sRGB printout and the middle darker box section matched the CMYK printout.
I am sure it is something fundamental or simple and I am completely overlooking it. I wish it were just a transparency issue, because people know how to fix or do workarounds for it. But, there are no vector objects with any transparency ...
If I missed some detail, I apologize. Any help would be a dream come true at this point! lol
Thank you!

Okay, I got motivated to try again. From doing a bit more research on troubleshooting AI printing problems, the Adobe article talks about print drivers. It was advised to uninstall and reinstall the print driver if the printing issue persists. So, I did. Unfortunately, I still had the same result after reinstalling and trying a test print! Ugh.
So, as Jacob said upfront, I seem to have an overactive print driver that is trying too hard (and it is a non-postscript printer which I realize is part of the problem).
There are so many variables in my situation as to how I create art and save/export art. I sometimes work solely in AI, sometimes solely in PSE and sometimes I use both programs to create. Consequently, I will:
(1) export directly from AI as JPEG if I am not adding PSE11 artwork.
(2) export directly from AI as PNG if I plan on inserting that image into PSE11 to add to artwork I have created in PSE11.
(3) drag vector objects as a Smart Objects directly from AI to PSE11 to add to artwork I am creating in PSE11 if I know I will playing with the vector object and resizing in PSE11.
So, I did a test print using scenario 2, where I inserted the heart and love text PNG (AI created vector object) into an old PSE11 document. This old document already had a vector object from AI with a solid background and I knew it printed correctly. So, after inserting this new PNG from AI into this old document, it printed correctly using the photo enhance mode.
However, I haven't had a chance to actually create new art in the older AI files (that I know print properly), resave as something else and try another test print (either by exporting as JPEG and printing in Word or by exporting as PNG file and inserting into PSE11 document, then saving as JPEG and printing in Word).
After testing the different possibilities of ICM settings within my printer, I found that the JPEG images printed out with the truest colors and best quality if I simply selected "no color management" from the printer. Shocker, huh? lol
MY SOLUTION: So, what I think I will simply do is add an instruction sheet with the printables I sell, explaining that the color profile setting should never be handled by the printer so make sure to turn off color management by printer (and if they feel they must use the printer for color management, make sure the setting is sRGB since I embed that color profile in my JPEG's).
Edited to add: Since my issue was never about how I could print a successful image (I knew I could simply change the color profile settings), but rather about how to make sure that customers would get consistent and high quality print outputs of my digital images, this seems like the best approach.
I don't think I will every really know exactly why I am now getting color shifts in the "photo enhance" mode when I did not have this problem a couple months ago - applying the same methods of creating artwork. I was concerned that I was saving/exporting using incorrect or mismatched color settings or something of that nature. However, since I went through the process of making my color spaces the same for everything, and I still have issue, clearly that is not the culprit. The only thing I can do to solve the problem and it is a straightforward solution anyway -> is to educate the buyer on how to print successfully (don't use photo enhance! ha ha).
Thanks again to everyone who chimed in and offered advice!

Trying to Create Cone from Image

I am attempting to take a circular image (a logo of something) and edit it so that it can be printed and turned into a small cone. I have spent HOURS researching this and cannot seem to find the the problem. I've followed the steps below (found on a tutorial at another website) and the gap (where the circle gets slid under itself to create the cone shape) is so small. I have messed around with it since this morning and am at my wit's end. Thank you, in advance, for any assistance!
Let's consider my avatar as the original image. I make sure it is cropped into a circle.
Then in photoshop, I do Filter->Distort->Polar coordinates->Polar to rectangular:
Then, I resize the contents (but not the container [e.g. select all, edit->transform->scale]) of the image horizontally. The percentage I reduce is the percentage of degrees I will remove:
Finally, I go back to polar coordinates, and retrim as a circle: (OP: I don't know what they mean by "retrim as a circle," though, so I stop after selecting "rectangular to polar")
Wrapping the image around the removed wedge is an exercise left to the reader.

Thank you for your reply, Nancy! I actually want to print this and then "assemble" it into a cone.
Here is the original tutorial. The original person was able to accomplish exactly what I want...I just can't figure out where I'm going wrong!
http://design.tutsplus.com/tutorials/illustrate-a-traffic-cone-icon-in-photoshop--psd-121

When trying to export a RAW image from Aperture to a jpeg, the jpeg file is completely black.

I am trying to share some photos that I have taken. I shot them in RAW and store them in Aperture that way. I then tried to export the version to my desktop to be able to send to someone. The export process went through just fine, but the jpeg file is just a black image. I have tried this with several different images with the same result.
I have done this a million times in the past with no problems. I don't know what is different now.
Thanks for any help you can provide.

As a work-around: are the jpegs ok, if you simply drag the images that you want to export from Aperture's browser to your Desktop?
What is your Aperture version?
And which export preset are you using? Check, if your "Export preset", for example "JPEG original size" has been changed. Have you perhaps added a watermark, that could be occluding the image?

How to drag an image around?

hi,
does anyone knows how to drag a image (.gif or .jpg picture) around inside a scrollPane?
i have tried to drag shapes (like rectangle) around and it works fine but not for a .gif picture,
so does anyone have any idea how to do so??
Thanks!!!!!

Hi,
You could solve it like this.
Draw the image on for example a (J)Component So make sure the component is of exact size as the image.
Add this component to some container (which uses a null layout), set the location of the component.
Then add a MouseMotionListener to this component and listen for the the events. This way by using the method: setLocation(Point x) on the component you can move the component around, so the image on the component can be moved.
I hope this helps you out.

Trying to make a system Image disc in windows 8.1 HP envy desktop 700-019

I have been trying to create a system Image on my desktop but I cannot do it, I have followed all the Instructions, tried Memorex discs, tried verbatim discs and tried nexXTECH discs but I always get an error message That there is not enough free space on the back up storage location to back up data error 0x80780048, no option to use a thumb drive and no option to format the disc, the other error code I get is 0x800704C8, File history is turned off and cannot turn it back on.
It tells me to create my own hard drive but when I click E drive to burn the disc to I am back to the error messages, I have next to nothing on this desktop, no pics, no videos, no games, perhaps 20 songs and thats it besides Norton and Microsoft office Home and Student. It has a 2 terabyte hard drive with 12GB of RAM and there is no way this could be full, I just do not understand what is going on.
Can anyone help please.
This question was solved.
View Solution.

Perform a hard disk image backup to an external hard drive using Macrium Reflect Free, not the trial version, for optimal results.
http://www.macrium.com/reflectfree.aspx
Trying to perform this to DVD or USB stick is doomed to fail and not very reliable.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 >       " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
          TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
          TFTP_MACADDR: The MAC address for this unit
               FE_PORT: 0= (default), 1
         FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                        5=Auto (default)
      TFTP_DESTINATION: The flash destination device for the file
                        flash:(default), usbflash0:, usbflash1:
Command line options:
   -h: this help screen
   -r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >

What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick

Problem trying to wrap a Microsoft Word paragraph in XML tags?!? :/

Hello everyone. I really hope this is not a big problem and that some of your could help. I wrote a Macro in VBA like a year ago that was intented to put a tag before every single paragraph in a document. The logic validates that the paragraph have no other
tag before putting one. All of this is based in styles. Some font styles would end up with different tags. This is my code and it works:
Sub edictos()
' Edictos de El Nuevo Día
' 06/20/2005 by Carlos Stella Sistemas de Información
' Actualización 08/08/2012
'Ver 2.0 made by Samuel Otero -> 07/26/2013
Dim oPara As Paragraph
Dim oRng As Range
'Borramos headers y footers
Call ClearHeaderFooters
'Borramos column breaks
Selection.Find.ClearFormatting
Selection.Find.Replacement.ClearFormatting
With Selection.Find
.Text = "^n"
.Replacement.Text = ""
.Forward = True
.Wrap = wdFindContinue
.Format = False
.MatchCase = False
.MatchWholeWord = False
.MatchWildcards = False
.MatchSoundsLike = False
.MatchAllWordForms = False
End With
Selection.Find.Execute Replace:=wdReplaceAll
'Lógica para poner los tags de Tera donde van
For Each oPara In ActiveDocument.Paragraphs
If oPara.Range.Style = "C10" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(intro) "
End If
End If
If oPara.Range.Style = "J10" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(intro) "
End If
End If
If oPara.Range.Style = "J12" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(intro) "
End If
End If
If oPara.Range.Style = "LE" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(main) "
End If
End If
If oPara.Range.Style = "XL" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(main) "
End If
End If
If oPara.Range.Style = "MF" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(main) "
End If
End If
If oPara.Range.Style = "HG" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(main) "
End If
End If
If oPara.Range.Style = "LW" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(main) "
End If
End If
If oPara.Range.Style = "J8" Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(main) "
End If
End If
' Agarrando texto sin estilo >_>
If oPara.Range.Font.Size <= 6 Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(main) "
End If
End If
If oPara.Range.Font.Size = 8 Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(capara) "
oPara.Range.InsertParagraphBefore
oPara.Range.InsertBefore "(start) "
End If
End If
If oPara.Range.Font.Size = 10 Then
If InStr(1, oPara.Range.Text, "(intro)") = 0 And _
InStr(1, oPara.Range.Text, "(main)") = 0 And _
InStr(1, oPara.Range.Text, "(capara)") = 0 Then
oPara.Range.InsertBefore "(intro) "
End If
End If
Next oPara
'Con esto borramos el primer espacio del documento (evitamos una línea demás en los edictos)
Selection.HomeKey Unit:=wdStory
Selection.MoveDown Unit:=wdLine, Count:=2
Selection.MoveRight Unit:=wdCharacter, Count:=8
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
Selection.TypeBackspace
'Crea el .txt para ser importado a Tera
ChangeFileOpenDirectory "C:\edictos\"
ActiveDocument.SaveAs FileName:="C:\edictos\Edictos.txt", FileFormat:= _
wdFormatText, AddToRecentFiles:=True, _
WritePassword:="", EmbedTrueTypeFonts:=False, _
SaveNativePictureFormat:=False, SaveFormsData:=False, SaveAsAOCELetter:= _
False, Encoding:=1252, InsertLineBreaks:=False, AllowSubstitutions:=False, _
LineEnding:=wdCRLF
MsgBox "Proceso completado", 0, "Yay!"
ActiveDocument.Close
End Sub
As you see, it ends up saving a .txt document with the tags.
NOW... the issue is that the tags wont work anymore in the new system, and I need to wrap the paragraph in XML Tags. I tried to do something like for styles:
If oPara.Range.Style = "LW" Then
If InStr(1, oPara.Range.Text, "<intro>") = 0 And _
InStr(1, oPara.Range.Text, "<main>") = 0 And _
InStr(1, oPara.Range.Text, "<capara>") = 0 Then
oPara.Range.InsertAfter "</main> "
oPara.Range.InsertBefore "<main> "
End If
End If
But it just would add the two tags before the paragraphs!!! Is there anyway to wrap the paragraph in XML tags, following my logic? Somebody help please!! Thank you!! :/

Hi,
Sorry for my delay.
I am afraid that this is not the proper forum for this issue, and I found that you have posted it in dedicated forum.
http://social.msdn.microsoft.com/Forums/office/en-US/8dad5670-d90b-4ea8-abe2-bc785a2368ca/problem-trying-to-wrap-a-microsoft-word-paragraph-in-xml-tags-?forum=worddev#8dad5670-d90b-4ea8-abe2-bc785a2368ca
I would suggest you focus on that thread to get more dedicated support.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Trying to display multipage tiff image getting error

Hi
I am trying to read multipage tiff image but dont know how
I tried to display single page tiff getting error
my code is
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Drawing;
using System.Drawing.Imaging;
namespace Documentviewer1
    public partial class _Default : System.Web.UI.Page
        //string filepath = "";
        protected void Page_Load(object sender, EventArgs e)
            //// filepath = "image\045237302.tif";
            string appath = Server.MapPath("/image") + @"\";
            string imagename = Request.QueryString["ImageFileName"];
            string filename = appath + imagename;
            Response.ContentType = "image/tiff";
            new Bitmap(filename).Save(Response.OutputStream, ImageFormat.Tiff);
            ////System.Drawing.Image TheImg = new App.Files.TIF(Request.QueryString["FilePath"]).GetTiffImageThumb(System.Convert.ToInt16(Request.QueryString["Pg"]), System.Convert.ToInt16(Request.QueryString["Height"]),
System.Convert.ToInt16(Request.QueryString["Width"]));//getting error in thisline Parameter not valid
my aspx page is has
<%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true"
    CodeBehind="Default.aspx.cs" Inherits="Documentviewer1._Default" %>
<asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent">
</asp:Content>
<asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent">
    <h2>
      <img alt="" src ="image/045237302.tif" width="200" height="200"/>
    </h2>
    <p>
        To learn more about ASP.NET visit <a href="http://www.asp.net" title="ASP.NET Website">www.asp.net</a>.
    </p>
    <p>
        You can also find <a href="http://go.microsoft.com/fwlink/?LinkID=152368&clcid=0x409"
            title="MSDN ASP.NET Docs">documentation on ASP.NET at MSDN</a>.
    </p>
</asp:Content>
getting error as Parameter not valid.
Can anybody help me to display the image in the browser.
Thanks
Mary Abraham
Mary Sunish

Hi MaryAbraham,
Since the issue regards ASP.NET and website deployment. I suggestion you post the question in the ASP.NET forums at
http://forums.asp.net/. It is appropriate and more experts will assist you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help! I am trying to use the scripts image processor in Photoshop CC.

Help! I am trying to use the scripts>image processor in Photoshop CC. When I click on it it comes up with an error saying that it cannot find the Javascript Plug In. I have the newest version of Java installed. How do I get it to work in Photoshop. Do I have to download a separate plug in? Any help would be greatly appreciated.

Java is not Javascript.
Do you have a Mac or PC?
If PC, do you have this file on your system?
C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\Extensions\ScriptingSupport.8li
If not, you've got a corrupted installation of Photoshop. Uninstalling and reinstalling may help.
-Noel

Trying to wrap a vector image around a tube shaped vector object

Similar Messages

Maybe you are looking for