TS01: Remove other flows from transaction and save

Dear Experts,
TRM has been customized whenever a new transaction is created (using TS01) and a specific Business Partner chosen (Counterparty), additional flows for commissions (0301 u2013 flow type) and transfer fees (0302 u2013 flow type) are automatically generated based on IMG u201CDefine Derivation Procedures and Rulesu201D and its assignment of u201Cderived flowsu201D of the specific BP.
For a specific  transaction our customer wants to remove the second flow 0302 u2013 Transfer fees although its deal has been performed with the same Counterparty that in its derivation rules include this flow (0302 u2013 Transfer fees). The business scenario is that this counterparty has always derived flows (Commissions and Transfer fees) but for this single one transaction it does not charge transfer fees. 
When I create the transaction (TS01), after filling the payment amount, I move to u201COther Flowsu201D tab. In this the two flows have been automatically created. Then I choose the second line with 0302 flow type and I choose u201CDelete Rowu201D. Although initially the line disappears from the u201COther flowsu201D list, when I press Enter or Save the transaction the line with 0302 flow type reappears. It seems as I cannot remove the flow.
Additionally I cannot change the amount of the flow!
Does anyone know how to remove the flow and save the transaction and /or change the proposed by the system amount?
Thank you, I would appreciate any help.

Hi,
For transaction derived flows, you can only change the amount but cannot remove the item as it is derived by default.  In case for  a single transaction you don't want the derived flow, you can remove it from the standing instructions of the counterparty and then create the transaction and then add the instruction back. 
Or you have to add the same flow in the reverse direction for the same amount in other flows so that is gets nullified.
Regards,
Ravi

Similar Messages

  • How to remove HP ink from hands and fabrics

    How to remove HP ink from hands and fabrics
    Please note that the ink used by HP is a water based ink that will clean easily. Here’s how to remove ink stains from hands and fabric.
    NOTE: IMMEDIATELY rinse the stained area with COLD water, and then follow the appropriate instructions.
    To remove ink stains from hands:
    Wash hands with an abrasive (gritty) soap. Note: It may take several washings.
    To remove ink stains from white fabrics:
    If ink from an HP Inkjet print cartridge spills on white fabric, use chlorine bleach and cold water to remove the stain, but act quickly.
    CAUTION: Use only COLD water. Warm or hot water will "set" the color into the fabric.
    To remove ink stains from colored fabrics:
    Use sudsy ammonia—a dilute mixture of detergent and ammonia—and cold water. Act quickly and test on an inconspicuous area first.
    CAUTION: Use cold water. Warm or hot water will "set" the color into the fabric.
    WARNING: Do not mix ammonia and chlorine bleach; this creates a toxic gas!
    Although I work for HP, my post's and replies are my own opinion. I am not an official HP spokesperson.
    ****Please click the Kudos Thumbs up if you would like to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

    This should be a sticky
    Although I work for HP, my post's and replies are my own opinion. I am not an official HP spokesperson.
    ****Please click the Kudos Thumbs up if you would like to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Hi. I lost my IPad. I left it on a plane. What can be done to locate it and / or remove my information from it  and / or disable it. Thanks

    Hi. I lost my IPad. I left it on a plane. What can be done to locate it and / or remove my information from it  and / or disable it. Thanks
    Thanks

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
     Cheers, Tom

  • WebDynpro Java: how to remove blank element from Table and Dropdown.

    Hi  Folks
    In a webdynpro application,
    I created a table and witten the below code to populate the table
         IPrivateDummyView.IFirst_TableElement First_Table_Element = null;
         First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
         First_Table_Element.setF_Value("One");
         wdContext.nodeFirst_Table().addElement(First_Table_Element);
         First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
         First_Table_Element.setF_Value("2");
         wdContext.nodeFirst_Table().addElement(First_Table_Element);
    As per the code, i got 2 row in the table.
    But , i have one Empty row on top of the table ,  how to get ride of this.
    i find the same problem happening with dropdown too, where i used DDBI, i populated a the content as mention, but i initial 2 row as blank and then i have my own elements ,as per my code.

    >
    > how to remove blank element from Table and Dropdown
    >
    Change selection property of related node to from 0..1 to 1..1 (mandatory)
    Re: DropdownByIndex and empty line (Thread: DropdownByIndex and empty line )
    Re: Can the empty selection be removed from element dropdownbykey(Thread: Can the empty selection be removed from element dropdownbykey )
    Edited by: Anagha Jawalekar on Nov 18, 2008 10:28 PM

  • I'm out of space on my hard drive. How do I move move entire photo albums from iphoto and save them to an external drive to free up space?

    I'm out of space on my hard drive. How do I move move entire photo albums from iphoto and save them to an external drive to free up space?

    You do not move the albums - you move the entire iphoto library intake as a single entity
    Make sure your external drive is formatted Ma OS extended (journaled) - then
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • How to remove 'others' memory from my iphone?

    How to remove 'others' memory from my iphone?

    OK I have deleted all old texts, voicemails and turned off the document and data to my iPhone 5.  I still show 1.5 GB of "OTHER".
    Any other ideas on how to remove this 1.5 GB of information.
    I can't update my iOS anymore.

  • [svn:osmf:] 13401: PARB changes: removing nesting capabilities from MediaContainer, and introducing a separate MediaContainerGroup class ( that is not a MediaContainer) that now holds the functionality.

    Revision: 13401
    Revision: 13401
    Author:   [email protected]
    Date:     2010-01-09 07:37:48 -0800 (Sat, 09 Jan 2010)
    Log Message:
    PARB changes: removing nesting capabilities from MediaContainer, and introducing a separate MediaContainerGroup class (that is not a MediaContainer) that now holds the functionality.
    Modified Paths:
        osmf/trunk/apps/samples/framework/NestedMediaContainersSample/NestedMediaContainersSample .as
        osmf/trunk/framework/MediaFramework/.actionScriptProperties
        osmf/trunk/framework/MediaFramework/.flexLibProperties
        osmf/trunk/framework/MediaFramework/org/osmf/containers/HTMLMediaContainer.as
        osmf/trunk/framework/MediaFramework/org/osmf/containers/IMediaContainer.as
        osmf/trunk/framework/MediaFramework/org/osmf/containers/MediaContainer.as
        osmf/trunk/framework/MediaFramework/org/osmf/display/MediaPlayerSprite.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/MediaFrameworkTests.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/containers/TestMediaContainer.as
    Added Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/display/MediaContainerGroup.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/display/TestMediaContainerGroup.as

    Hi,
    these concepts are used and implemented in jGuard(www.jguard.net) which enable easy JAAS integration into j2ee webapps across application servers.
    cheers,
    Charles(jGuard team).

  • Difference between Add from transaction and Add from Authorisatio default

    Hi All,
    Could anyone tell me the difference, from PFCG -> Menu -> Add from transaction and Add from Authorisatio default?
    Thanks and Regards, Pradeep

    I'm not a fan of "hiding" stuff from users so the not appearing in the menu part isn't a biggie for me.  If you do need to give background auths for something but don't want it to appear in a menu then this will let you do it without adding manual auths or changing standard object values
    Where I find it useful is that it allows you to assign & maintain indicators for stuff like Function Modules and Services.  No real business advantage other than it makes your security implementation cleaner.

  • Ipod 5 wasn't updating new playlists.  Removed all music from iPod and ended up with 34 GB of OTHER.  How do I remove this without doing a full restore?

    iPod 5 was not adding new playlists when synching (plenty of space remained in memory for it).  This happened around the time of the new update.  I removed all music from the iPod and when I went to resync the selected playlists, my OTHER portion of memory jumped up to 34GB and now there is not enough space on the iPod to put all my music back on.
    I've checked the usage of all the apps and photos, etc, it is pretty clear this is because of the music portion only.
    Is there anyway of removing this information?  Without doing a restore?  It is not jailbroken either.

    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • IOS8.0.2 removed every song from iPod and won't sync to put them back

    Okay, I'm working with two iPod Touchs right now on a fully updated iTunes on a PC. My iPod is not fully updated (8.0), yet I just now synced it and it gave me the songs I had recently downloaded and organized my playlists just fine.
    However, I'm trying to sync my sister's iPod. It's been updated to 8.0.2 and when I first tried to sync it, it removed every song from her library. I still have my library on my computer/iTunes, but her iPod is blank. All music has been removed save from some of the recently added and few obscure songs (18 songs in total, when we have >5000).
    When I try to sync it again, it recognizes that I want to add every single song. The memory bar at the bottom shows the memory that I intend to use up with all of the music. However, when it syncs, it tells me that it's 'Waiting for changes to be applied'. After about 5 minutes of that, the entire blue bar of music that is supposed to take up the iPod's memory vanishes and the iPod remains unsynced.
    To be fair, I did recently update this iPod that is not working. It was working on iOS 6 before but I updated it now. Maybe that's the reason it's not working now, but I have no idea how to find a solution to this.
    -I've restarted my computer, iTunes, and the iPod.
    -I do not have any missing/exclamation marked songs.
    -The iPod is set to automatically back up.
    -I've tried both 'syncing the entire music library' and 'filing extra memory with songs'.
    Does anyone have any idea how this can be solved? Thank you.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I'm trying to remove the background from pictures and PDFs.

    Hello All, this is the 3rd or 20th time I've tried removing backgrounds. I install water equipment for a living and try to manage my website on my own. Each time my products change, my suppliers send me literature in PDF format. Sometimes I'm installing the equipment before I have the literature. I take pictures of every install I perform and would love to use my pictures without the dirty basement in the background.
    I've spent hours trying to work with just one picture. All that fine detail, erasing, and zooming in and out, then click! I lose it, or can't save it, or it just doesn't work. I've watched tutorials, and watched it done right in front of me (on a PC) at my print shop. I thought I'd ask this community, because I've had 100% luck on here everytime.
    So, can I use the same software to remove images from PDFs and backgrounds from pictures? Which do you recommend? I have Adobe Photoshop CS2 and Adobe ImageReady CS2. I also have Gimp that I downloaded for Mac. Since I've never been successful with any of them, I'm not sure which one is wasting my time.
    Thank You,
    Steve

    Extracting images and removing backgrounds can be very complicated. There are many different techniques and methods for doing it: the trick is finding the right one for the image you're working on. Every image is different and what may work for one may not work for another. You can do all of the basic techniques in Photoshop CS2, though it's a little easier in newer versions. I'd recommend going through as many online tutorials on image extraction as you can tolerate. There are hundreds of them. (While I find him annoying to listen to, Russell Brown has made some excellent tutorials on the subject. Try this one to start.
    While it is possible to edit an image embedded in a PDF, you really need Acrobat Pro  to do it. Acrobat sends the image to Photoshop, where it can be edited, and then Photoshop sends it back to Acrobat after you're done. Or you can save it as a separate file. In the 20+ years I've used Adobe's stuff, I've never done that. It's usually much easier to do a screen capture of the image and then work on that copy. (There are some sizing and magnification issues involved with this, however.)
    In Photoshop, pay particular attention to Quick Mask mode, learn how masking works, how to make a selection based on a color range, how to use the Pen Tool to make a path that can be used as a selection, and how to save and load selections. Getting a clean extraction takes a lot of practice and it's almost never quick or easy, but it's worth the effort to learn how to do it well.

  • Itunes match has removed my playlists from itunes and my iphone. Not only that, many of the songs 'matched' on itunes do not show up on my iphone. Seriously annoyed, wish I'd never paid for it

    Please read the title; itunes match has removed my playlists on itunes and iphone and the songs that are supposedly 'matched' on itunes are not showing up on my iphone.
    Any Really annoyed about this

    iTunes Match does not have the ability to remove local files.
    The service operates by comparing the selected iTunes Library with the iTunes Store content and 'matching' or 'uploading' - it is very straightforward a 'match' provides equivalent access to iTunes Store content as a recognised 'purchase'; upload simply copies a 256k AAC variant into the cloud.  There are no elements of this activity that can erase the local library content.
    Would suggest you explore possible alternative causes of file loss.  Given the pattern described of selective deletion, leaving many Songs intact - would suggest making at least 2 secure offline Song file backups and starting the library again from a fresh install of iTunes once a thorough sweep of the system has been completed for virus.  It is also worth assessing the physical security of the system - who has access & with what privileges.
    To access Songs from the cloud, you would have to manually delete the Song from the library or open an empty library - so even when accessing content, iTunes Match provides no local deletion capability.

  • How to make button to format a HardDrive or USB, How to remove all files from folder, and How to delete a process in listbox with a textbox?

    Hello!
    Here's the question with explaniation: How can i format the USB or Drive by clicking a button what's meant for it?
    and the second question what's also in vb.net: How can i remove all files from folder ? 
     Here's the Look of program: *
    Using the PC button, it will delete the free space of the PC, do you guys/girls know where it's location?

    Example Code:
    Imports System.Runtime.InteropServices
    Imports System.IO
    Public Class Form1
    Dim CBoxDrives As New ComboBox
    WithEvents FButton As New Button
    <DllImport("shell32.dll")> _
    Private Shared Function SHFormatDrive(ByVal hwnd As IntPtr, ByVal drive As UInteger, _
    ByVal fmtID As UInteger, ByVal options As UInteger) As ULong
    End Function
    Private Enum SHFormatFlags As Integer
    SHFMT_ID_DEFAULT = &HFFFF
    SHFMT_OPT_FULL = &H1
    SHFMT_OPT_SYSONLY = &H2
    SHFMT_ERROR = &HFFFFFFFF
    SHFMT_CANCEL = &HFFFFFFFE
    SHFMT_NOFORMAT = &HFFFFFFD
    SHFD_FORMAT_FULL = 0 ' full format
    SHFD_FORMAT_QUICK = 1 ' quick format
    End Enum
    Private Sub FButton_Click_1(sender As System.Object, e As System.EventArgs) Handles FButton.Click
    If CBoxDrives.Text = "" Then
    MsgBox("No Drive Selected")
    Exit Sub
    End If
    Dim Iresult As ULong = SHFormatDrive(CType(Me.Handle.ToInt32, IntPtr), CUInt(Asc(CBoxDrives.Text.Substring(0, 1)) - Asc("A")), CUInt(SHFormatFlags.SHFMT_ID_DEFAULT), 1)
    End Sub
    Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
    Me.Size = New Size(200, 100)
    With FButton
    .Size = New Size(50, 25)
    .Location = New Point(5, 5)
    .Text = "Format"
    End With
    Me.Controls.Add(FButton)
    With CBoxDrives
    .Size = New Size(50, 25)
    .Location = New Point(75, 5)
    .DropDownStyle = ComboBoxStyle.DropDown
    End With
    Me.Controls.Add(CBoxDrives)
    Dim DrivesFound As Integer = 0
    Dim allDrives() As DriveInfo = DriveInfo.GetDrives()
    Dim d As DriveInfo
    For Each d In allDrives
    If ((d.DriveType = DriveType.Fixed) Or (d.DriveType = DriveType.Removable)) AndAlso Environment.GetEnvironmentVariable("SYSTEMROOT").StartsWith(d.Name) = False Then
    CBoxDrives.Items.Add(d.Name)
    DrivesFound += 1
    End If
    Next
    CBoxDrives.SelectedIndex = DrivesFound - 1
    End Sub
    End Class

  • I have removed my iPhone from icloud and it is no longer on the device list however I can still see it in icloud settings

    I have taken my smashed (unusable) iPhone into apple for repair today and followed their instructions beforehand, removing the phone from icloud through my PC. However the guy at apple could not do anything as he said it was still connected to i cloud. On checking my account, my phone is no longer on the device list but can still be seen in icloud settings. He was stumped and asked if I had set up another apple id and maybe forgotten about it (I definitely haven't, I've had the same account for 6 years,) his other explanation was a technical glitch. I'm now stuck with a broken phone and a £60.00 a month bill and also pretty annoyed about the wasted 3.5 hour round trip. Any ideas please?  It would be much appreciated

    Hello
    Try restoring the device and setting up as new.
    If it is still shows an iCloud activation lock, then it's on an iCloud account
               The wrong device was removed from an iCloud account.
    Check any other Apple IDs you might have at
                 iCloud.com
    Get signed into them and remove that device.
    I wish this was the first time I seen this.
    Best of Luck

  • Remove Black Bars from Top and Bottom

    Here's my situation:
    I shot my footage FULL FRAME (not anamorphic) but while shooting my footage I had markers on my LCD for a 2.35 Aspect Ratio.
    Now that my footage is edited I dropped the FCP matte filter for 2.35
    For those of you out there I know I did not use a anamorphic lens and I know I did not shoot it on 16:9 format. But is there a way to crop out the Black bars?
    Again like the previous post I would like to remove the black bars and have my QUICKTIME MOV. play like the ones on APPLE's Trailer site: http://www.apple.com/trailers/
    Can anyone out there explain how to do this? Other then just drop this and change the size...WHAT DOES THAT MEAN? If you can provide more step by step information that would be great!

    1. Create a New Sequence in FCP (Command-N)
    2. Bring up your Sequence Settings (Comman-Zero) and alter them...
    2a. so that your Frame Size is (approx) 720x306
    2b. set Aspect Ratio to Custom.
    3. Drop in your widescreen-filtered footage (they'll be shrunk, so...)
    4. Select your clip (or all clips) (Command-A)
    5. Remove Attributes (Option-Command-V) and select 'Basic Motion' then click OK.
    6. Your movie should now (pretty much) fill the 2.35:1 sequence.
    You'll probably need to tweak the frame size slightly (It's been a while since I've done this so my number(s) might be off).
    Also, when you (ultimately) Export Via QuickTime Conversion (for the web?), be sure to take into account that the web uses Square Pixels - so resize your QT movie (in the Save Dialog, under Options) to be 640x306. (Again, my exact numbers might be off)
    Good luck.

Maybe you are looking for