TS1248 Track Pad not working correctly after upgrading to OSX10.8

I've the same issue since yeterday night after upgrading to OSX10.8 from OSX10.6. The problem I am having is only right side of the track pad is not working.. Did some one already experience this issue ?
See screen shot
Cheers,
Vivek

In addtion to Altenbach's comments -
I'd recommend trying another VI function to get the power spectrum for
your signal to see if the behavior is the same. You can find some
examples of VIs using the power spectrum functions using the NI Example
Finder.
You can go to LabVIEW's Example Finder by going to Help >> Find Examples.
Then search for FFT. There should be some results that include FFT and
Power Spectrum Units.vi, Power Spectrum Measurement.vi, Basic Spectral Measurements.vi, and Spectrum Measurements.vi. Try opening and
running these examples to see if the VIs are returning the proper
results.
Mark Walters
Application Engineer
National Instruments

Similar Messages

Track Pad not working properly after upgrade to OS10 Yosemite

Since upgrade to OS10 Yosemite, my stand-alone Apple Track Pad has lost the ability to "double-tap select and drag." Only the three finger drag works now. My Apple Track Pad is paired to an early 2009 iMac 24". How I can restore the "double-tap select and drag" functionality? Any clues much appreciated.

Ralph, thanks for the quick reply. All of the Trackpad preference boxes are checked for "Point & Click" except "Three finger drag." Once "Three finger drag" is checked, this action spawns a simultaneous action in the Trackpad "More Gestures" area that changes the gesture for Mission Control from "three finger swipe up" to "four finger swipe up."
Since I am having this problem on an early 2009 iMac, I decided to check-out my 2013 MBPr for the same behavior. Amazingly, all was working well with the built-in trackpad functionality regarding the "double-tap select and drag" until i checked and then un-checked the "Three finger drag" box (in Trackpad preference > point & click). Now my "double-tap select and drag" is BROKEN on my 2013 MBPR.

My mouse is not working correctly after upgrade to ITunes 11

I upgraded to iTunes 11 for WinXP and now my mouse is not working correctly. No double clicks, no right button function and sometimes refuses to do simple left click options. What can I do?
I've tried new mouse drivers and checking the settings in Control Panel but no joy so far.
Driving me mad and taking me three times longer to do anything as I look for keyboard solutions.

I'm facing the same problem too on Windows 8. No mouse clicks (just 'ding' sound whenever trying to click anything).
I could work around it on Windows 8, but ultimately have to restart my PC to get back mouse functionality.
I wasn't quite sure which app is to blame, but ultimately concluded it's iTunes 11. As this behaviour always concided with having iTunes running in the background for 15-20 minutes (usually listening to podcasts) and never seems to happen when iTunes 11 isn't running.
Don't know what to make of this, I'm currently playing my podcasts through Windows Media Player instead. I'll hopefully try running iTunes 11 in Windows 7 Compatibiliy mode to see if that helps.

HT201365 my text to send messages is now not working correctly after upgrading

Since upgrading last week my text is not working correctly it is very slow does not show the letter being used and takes seconds to be put in

Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

Bluetooth not working correctly after upgrading.

I have Lenovo G580 Notebook. I recently upgraded from Windows 7 to Windows 8 (32-bit). In Windows 7, the Bluetooth software used to work with no problems. But since I've upgraded to Windows 8, the Bluetooth device doesn't function well. I had installed the Qualcomm Atheros Bluetooth Suite 3.0 for Windows 8 32-bit. But whenever I try to search for any devices, it doesn't find any nor any other device (such as Mobile, Tablet, etc.) could find my Bluetooth PC. I tried installing the Atheros Bluetooth for Windows 7 32-bit. But it has compatibility issue. I also tried installing the Broadcom Bluetooth software but the setup doesn't find any Bluetooth device on my Notebook. What shall I do? Please guide me
And one more question :- Can I install Lenovo Energy Management for Windows 7 on Windows 8?

Hi Deepak_Kadam,
Thanks for posting in the Lenovo Community,
I’d like to help you with the issue that you’re facing and first I’d like to provide you with the driver for the Bluetooth for windows 8:
Bluetooth Driver
And also please uninstall the version of Lenovo Energy management installed on your machine and reinstall it from the below link:
Lenovo Energy Management
And kindly check after that if the Bluetooth Device is working fine.
Hope the information helps. Let us know.
Regards
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Music shuffle not working correctly after upgrade to ios8

Since I upgraded to ios 8 my music player stops remembering the last song playing and i have to restart shuffle from scratch everytime i want to start playing music.
I am choosing songs and have set to shuffle all. i upgraded to ios 8.0.2 already
Any advise how to fix this?

Hello patmac0708,
It may help to force close all open apps, then reset your iPhone.
iOS: Understanding multitasking
http://support.apple.com/kb/HT4211
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the behavior persists, the next step would be to restore the device.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

Wifi is not working properly after upgrading 7.1.1 onmy i4s

Dear Apple
i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
its my humble request please find a solution and provide me as soon as possble..
my totally work on wifi .
and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
Thanx & Regards
Sam
+91-92555-04628

settings - general - reset - reset network settings.

Some time tech pad not working correctly

I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

Hello @BABUMON ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I upgraded to 6.02 and still get this message from Gmail: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version."

When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?

Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Be aware that TenFourFox doesn't support plugins.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Thanks for your information.
It will help many users that have huawei E3372 with same problem.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

TS1248 Track Pad not working correctly after upgrading to OSX10.8

Similar Messages

Maybe you are looking for