TS1253 airport express can not find a driver for my my Samsung CLX-3185 connected with a USB. I can see the printer and it tells me that driver is available but then it can not find it.
I can see and download the driver from the net but it does not help the Airport Express. What can I do?
Thanks for your answer.
actually, my ipod will not let me activate it with apple id, this happened when the new iOS acutalizó understand that has more security, but do not know what to do.
Similar Messages
-
I did an automatic update to my daughter's iphone and it did not complete the update from version 6.0 to I believe 8. I waited for hours but the line stopped at 70%. I tried to restore my old settings but now my iphone will not start. When I try to start the
phone, I see the apple and a white line that never moves past 15%.Hi JG14usa,
Welcome to the Apple Support Communities!
I understand that you attempted an update on your daughter’s iPhone but the update will not complete. For this type of situation, it may be necessary to place your iPhone into recovery mode and restore. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
Envy 110 e-all in one printer D411. when i enter my efax number and pin on the printer I get a message that my login is invalid. However, I can go to the efax website and using the same number and pin, I can login to the website. How do I fix this?
This question was solved.
View Solution.Try logging in without the "1" in front of the 10 digit number, if you are already not using the 1, put it in front of the fax number. If that does not work, try turning ePrint off, then back on from under the web services menu. That menu is located under the set up Icon on the front panel that looks like a wrench. Then after that touch the webservices icon ( the one that looks like a piece of paper with a target behind it) and then reprint the info/report page from webservices and then try to login again.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved? -
I am trying to transfer music from a library that is in my network. I can see the library and play the music but cannot figure how in the world to import it into MY library.
You can Share the Music but you cannot Transfer it to a Different Apple ID.
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html -
I use Firefox to load pictures into my Picassa Albums. Two days ago when I tried to make a new album, Firefox repeatedly block Picassa. I checked in the Options box and my Picassa site was listed to ALLOW but it will not allow. How do I fix this problem so I can use Picassa?
Thanks,
DavidStart Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
I am having trouble with an ITunes I'd request to log in that is not my ITunes ID. E request pops up all the time. It stops the app or net site every time. Like I said it is not my ID. How can I stop or delete this ID?
Go to Settings>Store>Apple ID. What ID is in the settings. Tap on that ID to change it. Sign Out. Sign in with your own ID. After you sign out with the incorrect ID, restart the iPad before you sign into your correct account.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go to Settings>Store and sign in. -
I was able to install and have an icon on my desktop. When i click on it it automatically pops a box up that says: Firefox has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Then it highlights an icon at the bottom to show what the problem is and it is DEP (data execution prevention. I tried a few suggestions there but it didn't work. So it said to see if there is a download version compatable with DEP
See:
* https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it -
I have an older model iPhone 3GS. This morning I awoke to a screen that shows the iTunes logo with a USB cord underneath. The AT&T IT person says that I need to do a reset through the iTunes website but I cant find where I need to be. Can anyone offer any suggestions?
I am having the same problem and it is even bigger.
When opening a 1-page PDF in iBooks and sending it via mail it is sent inline as preview, but the recipient cannot open the file anymore. Also on iPad and iPhone there is no "open in" possible.
Somehow the mail app does destroy the file. What is going wrong? -
Attempting to install the Apps and its prompting me to close my Bridge, but my Bridge is not open.
http://helpx.adobe.com/x-productkb/global/error-close-following-applications-continue.html Answered my own question!
-
I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?
Thanks Eric, but that was already turned on. I just now tried turning it off and on again, no change. Actually, I"m more interested in seeing the names than the pictures. I now only see the phone numbers and generic avatars where pics would be.
-
How to install driver for Windows 8.1 without physical connection
I have a Photosmart 7762 printer connected to a NAS box (with wiring all very difficult to get to behind various office units) and want to be able to print to it from a new Windows 8.1 PC that is installed (again with difficult to get to wiring) in a separate room but on the same network.
The HP site for the printer says I have to use Windows Update to get the driver, but this only works if you physically connect the printer to the PC which isn't an easy thing to do in this case.
Does anyone know where I can get hold of the driver so I can use the "Have Disk" option? I have been unable to find it anywhere. Alternatively, does anyone know how to copy the driver from an existing Windows 7 install (on a laptop I could connect it to) and whether that would work?
This question was solved.
View Solution.Hi,
Folow the steps listed under Download the driver for later use or use on another computer below, it will allow downloading the INF and installing those manually, be sure to follow the link to Microsoft which explain how to locate the correct package and extract it:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03470332&DocLang=en&docLocale=en_US&...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks
Hi again, I am on an iMac using OSX 10.7.5, I"ve taken screenshots to show you I think my settings are correct
-
Trying to export RAW originals from Aperature 3 to LightRoom 4: I choose File>Export>Originals. Then Pictures>LR. But then I can't find files in LR library.Files seem stuck in Pictures as NEF and or DNG files. I know Im stuck on something dumb but I am stuck. Help?
You now need to import those files into Lightroom.
BTW, Lightroom uses a "referenced" system so your images will always be in the folders you download/copy them to. Lightroom is a database first and foremost, albeit with non-destructive editing capabilities (effectively Adobe Camera Raw). -
Problems after virus disinfection, when I plug in my iPod, it asks if I want to scan and fix, but then it can't find the device. What should I try?
I used Avast and Malwarebytes. The computer was severly infected with the FBI virus. I had to do a repair reinstall of Windows 7. The client is upset about her iPod, which at this point is the only thing still having a problem. I'm not familiar with Apple products, but I told her I would research it.
-
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
Please help me i've lost my phone as it was off when i lost it as it was flat, Please help. I was never registered with iTunes.
-
Opening +Receipts-isseue =Closing Stock Query
Dear Experts, I need a query with condition from to date for stock movement. Following Column I required in Query Item code, Item description, Opening +Receipts-issue =Closing Stock Query Thanks in Advance. Regards MANGESH PAGDAHRE. Edited by: MANGES
-
Video Chat won't start anymore! error -8
here's the error log. Please diagnose my problem and give me a solution pros. thanks. System Preferences>Quicktime>Streaming>Streaming speed: 1.5Mbps/T1/Intranet/LAN (don't use Automatic or Intranet/LAN iChat>Preferences>Video>Bandwidth limit: None R
-
No update on os x 10.6.8 available
my os is 10.6.8, because I had to format my HD while installing with the old Lion CD - Ican't go to 10.7.1. or to 10.7.2 or to 10.7.3 because the system says: You have to have 10.7 In the apple -store is only 10.7.1 available but not 10.7 When I ask
-
Flex Mobile Project only lists "Google Android" in Target Platforms
I just downloaded the masters colection cs5.5 and im am using FlashBuilder 4.5. When I create a new Flex Mobile Project, only Google Android is a target platform. I don't see Blackberry or iOS as options. I do see Apple iOS when I create a mobile