TS1253 i have airport extreme, and printer works with my imac, but not with my mac book pro??

i tried setting up the printer under my wireless network only, and using the printer information, tried both and nothing works, my imac's same settings for the printer, and just cant get it to work.
i am ussing airport extreme, and it shows printer conecting etc. but then it says not programed correctly and it fails.
i dont know what else to try, i have followed every step on the manual, and nothing works..
someone help me

Could you open System Profiler on the iMac and the MBPro and select the Printers entry. Then in the top right pane you can select the printers entry and the bottom right pane will show information about your setup. Can you copy this information from both Mac's and paste back here.

Similar Messages

  • Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

    Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

    First, make sure that all your devices are using the same Apple ID in iMessages including your Mac.  Second, your messages that you've already started on your devices will not show up on your Mac - only ones that you start from now on will show up.  Third, if you're still not syncing accross all devices, make sure you read the directions on the first page of this thread.  It should work after performing those steps.  Good luck!

  • I need to design and print enumerated event tickets.  What program on my Mac Book Pro should I use?

    I need to design and print sequential numbered event tickets.  What program on my Mac Book Pro should I use? i do not have  microsoft word nor do i want to download it , so just on the mac apps please ?

    This is for Pages '09, not possible in Pages 5 to my knowledge.
    See Numbered Tickets:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
    Peter

  • My I tunes match is working on my I phone 5, I pad and Apple tv  but no in my mac book pro

    Dont know what is happening.
    I have my I tunes match working in my iphone, in my I pad, Apple tv but not in my mac book pro.
    I changed from a PC where my i tunes library was, and when I bougth and changed to my macbook pro, I activated to I tunes match and it was working, now, it appears that I have the ammount of songs, but they dont appear in the itunes library. I think that the problem started since i Upload to Maverick X
    Please help

    Hi,
    Is itunes match turned on? If so, try holding shift key whilst turning off match.
    Now turn match back on, signing in with the apple ID that you used to set up match. You will be asked to add this computer, do so. Once process complete you should see all the music you have in cloud.
    Jim

  • I have airport extreme and just purchased a D-Link DCS-932L home network camera.  D-Link says I need UpNp but the extreme doesn't support this.  Can I use port mapping?  if so anyone know how to set that up?  thanks

    I have airport extreme and just purchased a D-Link DCS-932L home network camera.  D-Link says I need UpNp but the extreme doesn't support this.  Can I use port mapping?  if so anyone know how to set that up?  thanks

    Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
    Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
    Select Manual Setup.
    Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
    Select Advanced, and then, select the Port Mapping tab.
    Click the plus sign to add a new port mapping.
    For Service, leave the default; this will change to "Custom" once you start entering port values.
    In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
    In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
    Click on Update.
    To connect to the shared Camera from a remote location using a Mac or PC:
    Start your favorite web browser.
    Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

  • My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?

    My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?
    I have restarted all units, disconnected and reconnected

    Hi ryanfromstockbridge,
    I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Printing troubleshooting
    Troubleshooting printer issues in OS X - Apple Support
    OS X Yosemite: Add or remove a printer
    Sincerely,
    - Brenden

  • I can not set up my airport extreme, he's worked over the internet but I can not back up

    I can not set up my airport extreme, he's worked over the internet but I can not back up

    ''donngra [[#answer-685379|said]]''
    <blockquote>
    ''FredMcD [[#answer-685331|said]]''
    <blockquote>
    Your System Details shows;
    Installed Plug-ins
    Shockwave Flash 15.0 r0
    Shockwave Flash 11.5 r502
    Having more than one version of a program may cause issues.
    Grab the uninstaller from here:
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
    Then reinstall the latest version.
    Flash Player '''v16.0.0.296<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
    Shockwave Director '''v12.1.6.156 http://get.adobe.com/shockwave/'''
    </blockquote>
    </blockquote>

  • ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
    http://support.apple.com/kb/PH1453

  • Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

    Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

    YEAY!
    I just got the solution (that worked for me, anyway) from a Sony support rep. No PC or VMWare needed.
    OK, you've installed Sony eBook Library v3, and Adobe Digital editions, you've set up your acocunts and authorized your computer on both of them, and you've authorized your Reader with the Sony Library application.
    You go to the public library ebook download page, either through the Sony Library or just through a bookmark.
    You check out a book, and open it in Adobe Digital Editions, which still won't recognize your Reader.
    BUT, in the Sony Library app, you can now click "File, Import.." and go find the pdf you downloaded with the Adobe app.
    On my Mac, it was in ~/Documents/Digital Editions
    Import it, and drag it to your Reader.
    The first time you do this, it will ask you to authorize the Reader with your Adobe ID.
    Worked like a charm.

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

    I have OS 10.8.2 and use wireless at home just fine.
    When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
    I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
    What do I need to do connect via a cable modem?

    You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

  • HT2801 cd will not load in mac book pro.  Tried different cd's, tried same cd on other mac and it goes in okay.  Any ideas?

    CD will not load in mac book pro.  Tried different cd's, tried same cd in different mac book but it works on other mac book but will not work on initial mac book.  Tried pressing command/option/esc.  Tried restarting and shutting down computer but still will not load cd.  It goes in but pops back out.  Any ideas?

    lorenzod3046 wrote:
    I have already tried compressed air.  No luck.  How will I be able to get the cleaning disk in to load if I can't load a regular cd? 
    How will i be able to get the business card in far enough to reach the inner area where the optics probably are located?
    Cleaning discs will load.  On a MBP that has never been cleaned, run the cleaning 2-3 times.  If you use the slot a lot, use the cleaning disc about every 3 months.

  • My firewire port works with ext hd but not with audio interface

    2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

    You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
    This is not, neccessarily, an Apple issue.

  • HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    Could the disk have failed?
    Can you hear it?
    Boot from the install DVD and see what Disk Utility says.

  • I have AirPort Extreme and cannot connect to the internet with a land line but the WiFi works

    I have an AirPort Extreme and have been using for several months successfully, but as of two weeks ago, the line that I have hooked up to my desktop no longer provides internet service, but the WiFi works fine for the I-Pad and I-Pod.
    I have checked with my service provider and my modem works successfully hooked up the the AirPort extreme or directly to the PC.  When I am hooked in from the modem directly to my PC, I have internet for my desktop, but of course no WiFi.
    If I connect the Modem to the Router and the router to my desktop, I have WiFi, but no internet service to my desktop.
    I have replaced the network cable but to no avail.
    Any suggestions?

    It appears that there may be something amiss with the Ethernet switch that is built-in the 802.11n AirPort Extreme Base Station (AEBSn) or its configuration settings may be incorrect. I assume that you also tried using the other LAN ports on the AEBSn and the outcome was the same ... no Internet access via a wired connection.
    One thing to try is to change the Ethernet adapter settings on the PC. It is possible that its current settings may be appropriate when connected directly to the Internet modem, but may be off for connecting to the AEBSn. If your PC's Ethernet adapter has options to control Speed, Duplex, & MTU, I would change these to the following respectively: 1000 Mbps, Full duplex, & 1500

Maybe you are looking for