TS1286 Hi, I am trying to restore my i-phone 4 and keep getting error messages 2001 & 2006. have tried to follow directions but no success. Any suggestions??
Hi. I am trying to restore my iphone 4. Keep receiving error codes 2001 7 2006. Have followed instruction on web, No success. Any help ouy there??
It may be related to conflicting security software.
If the errors persist on another computer and known-good USB cable, the device may need service.
Similar Messages
-
I'm trying to sync my iphone 5s with itunes and keep getting error message "Device is timed out", can anyone help me please?
Try here first:
iTunes: Error 13019 during sync
Then here:
Help Unknown Error 13019 (Updated) -
Cant open my Raw from my NIKON D7000 in Photoshop and cant down load updates get error messages all the time have tried at least ten times and tried to get help from support but not succeeded.
Very bad I think but what to do????
UlfCamera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium -
Tried to upgrade to iOS 5 and keep getting error message 1611.
I plug in my iPad and try to upgrade to the new iOS 5 and it restored the iPad and now I'm getting error message 1611 and it won't even let me use my iPad right now, it's stuck at the start screen with the sync cord and iTunes logo... HELP...
I had a similar problem -- but found a simple fixe here.
All I had to do was move my USB cable from a port on the side of my computer monitor to a port on the computer itself.
Easy!
Funny thing is, the original setup worked fine when I upgraded my iPhone 4 earlier in the afternoon, and I've synched my iPad 2 using it hundreds of times. But it wouldn't do the upgrade for the iPad.
Hopefully it will work for you too, and others that may read this thread.
-Tom in SoCal -
I just purchased the adobe so I could convert pdf to word but I keep getting an error message saying trouble signing in, but I am already signed in...what's up?
Hi sdh138,
It can take a few hours for your order to process fully, and I do see that your subscription is still "pending" in our order management system. If you're still unable to access the service in a few hours, please let us know.
Best,
Sara -
I am trying to install the itune update and keep getting error message
the message says i need to get rid of application itunes.
What's the precise text of the error message, please? (There's a few different ones you might be getting that I can think of.)
-
I just tried to install the iTunes update 11.4.1 and keep getting error messages. I have never had this issue before over many years of using iTunes and getting updates to the software. I have removed the iTunes from my computer and reinstalled it but keep getting the errors. Here are the error statements: "Runtime error: Program: C:\Program Files(x86)\iTunes\iTunes.exe; R6034; An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin
-
HT201274 trying to restore my iphone 5. i keep getting error 21. i tried on 5 different computers
I am trying to restore my iphone 5. I keep getting error 21. I have tried on several computers . What do I do?
Either your antivirus/firewall is blocking access to Apple's servers, or all of those computers you tried have been used to hack or jailbreak some iOS device in the past.
-
I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?
Hi hannijin,
What version of the Mac OS X do you have on your computer? The version of iTunes that you can install is dependent on the operating system that you have. For example, the current version of iTunes requires OS X version 10.7.5 or later.
Finding the OS X version and build information on your Mac - Apple Support
https://support.apple.com/en-us/HT201260
Apple - OS X Yosemite - How to Upgrade
https://www.apple.com/osx/how-to-upgrade/
Hope that helps ...
- Judy -
I'm trying to update to CC (2014) and keep getting this message: "Installation Failed. Installation encountered an error. Please restart your system and try again. (15) I've done the restart, same problem.
Help!Hi stijill2,
In case you are facing issues uninstalling the app's then please try manual cleanup of Adobe from your machine by following the below mentioned steps:
1. Navigate to Applications and trash all Adobe app's and Adobe folder.
2. Navigate to Applications/Utilities/ and trash Adobe Application Manager,Adobe Creative Cloud, Adobe Installer folder.
3. Go to Library/Application Support and trash Adobe.
4.Go to ~/Library/Application Support and trash Adobe.
Try installing the CC app's and let us know if still the error persists.
Regards,
Romit Sinha -
I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf" Can anyone help?
Are you running Kaspersky security software on that PC? (There's been a few reports in recent times of Kaspersky interfering with iTunes installs, with that message being produced.)
If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
http://www.apple.com/itunes/download/
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Any better luck with the security software shut down? -
Trying to re install PSE 11 and keep getting error while installing Shared Technologies
Trying to re install PSE 11 and keep getting error while installing Shared Technologies
Try this link first:
<Install rollback and Shared Technologies | Windows>
It is for the Windows system but if you are using Apple MAC then you'll have to wait until Barbara is here later today. -
i am trying to install firefox 4 and keep getting the message that you have to reboot your computer to complete the uninstall i have done this a number of times any suggestions
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
I can't no longer access Itunes. Keep getting error message 127. I tried uninstalling Itunes, but can't. So frustrated. Please help.
First, if you've moved the iPhoto library to an external drive, make sure that drive is mounted by opening it in the Finder.
The issue can be caused by sharing the photo library on a network (against Apple's advice) or by opening it in more than one local user account at the same time. You may be able to clear the error by logging out or restarting the computer. If not, do as follows.
Quit iPhoto if it's running, locally or on any file-sharing client. Select the iPhoto Library in the Finder. Usually it's in the Pictures folder, but you may have moved it somewhere else. Right-click or control-click the library icon and select
Show Package Contents
from the popup menu. In the folder that opens, navigate to
Database/apdb/lockfile.pid
and move that file, if it exists, to the Trash. Close the Finder window.
Credit for this observation to ASC member Elijahg. -
I keep getting error message -42408 when I try to open ITunes Store.I sent a email to support and they sent me a link from Roy B,I tried both of his sugegstions and neither worked.Anyone have any other ideas????
Did you get anywhere with this, ikeaheerlen?
I am having the same sort problem (although my keyboard is recognized so I'm much further along than you).
I had a MacBook Pro with an XP SP3 partition and a Windows 7 partition on it.
I switched to a Mac Pro and wanted to migrate them over to it.
I used WinClone to make backups of both partitions and transferred the WinClone images to the Mac Pro.
I manually created the partitions and restored the WinClone images into each one.
But VMware wouldn't recognize either one.
So I deleted them both, and let Boot Camp Assistant (re-)create a single Boot Camp partition. Then I restored the Windows 7 WinClone image into it.
Ever since then all I get is "BOOTMGR is missing" error.
I thought maybe since I had dual-boot working (with a boot manager) in the old MacBook Pro setup, that the boot manager must've lived on the Windows XP SP3 partition, and it's completely missing from the Windows 7 partition. So I figured I needed to recreate it somehow.
After using the Windows 7 DVD ISO disc image to boot from, and trying several automated/manual steps, I can now actually get VMware to recognize the Boot Camp partition as being one, but when it tries to set it up for use with VMware, it complains that it isn't ready because it must have shut down incorrectly. It says to boot into Windows, then do a clean shutdown. But when I select the Boot Camp partition from Startup Disk, it boots from it but I still get the "BOOTMGR is missing" error even in a 'native' Boot Camp boot
I've tried all the steps I can find (including manual "bcdedit" steps booted from the Windows 7 DVD disc image) to no avail. I don't know what else to try at this point ...
Maybe you are looking for
-
I have a flow controller linked to fieldpoint that is tripping my alarm system (in Bridgeview) every time it reads a quick voltage difference. This occurs only for an instance, but it is enough to trip my alarms. I wanted to place in a 1 or 2 second
-
Dialog box with default starting location?
Running LV2010. I want to prompt a user to save a file by opening a dialog box. This way the user can select the file and location of the file. Problem is, I want to open the dialog box starting in a default folder that I choose. The LV help for
-
Apple Studio display, No Video!
My PowerMac G5 detects my 17 inch Cinema display, but it doesn't turn on! I have tried everything short of opening it!
-
HTML anchor links not working (won't scroll down to content). Why?
Hi. We have a portlet that simply pulls in an external web site so it can be viewed and accessed within our portal. The navigation bar within this website using HTML anchors ("a href='#stuff' and "a name='stuff'") to let the user jump/scroll to a par
-
I\m trying create EM repository on 11.1.0.6.0 (Windows platform) and get some error: 1)emca -deconfig dbcontrol db -repos drop DROP USER mgmt_view CASCADE; DROP ROLE mgmt_user; DROP USER sysman CASCADE; 2)emca -config dbcontrol db -repos create START