TS1286 I am getting Error 9 on my iPad.

I have tried the fixes recommended here and it doen't solve the problem. Still showing an iTunes logo and USB cable picture. Anyone got any other ideas. Have tried updating iTunes software from two different laptops and also have used different USB cables. Thanks!

What iOS version is currently on your iPad?
The error number is not included in the 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Similar Messages

I get error message on my ipad mini OxE800000A it worked okay a little while ago

I get error message on my ipad mini OxE800000A it worked okay a little while ago

Try the following document:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

I am continually getting error -69 when syncing iPad Air with latest iOS and iTunes versions. Any suggestions?

I am continually getting error -69 when syncing iPad Air with latest iOS and iTunes versions. Any suggestions?

Try Googling "sync without iTunes".
There are free alternatives and there are not so free alternatives.
Btw, to check if AVG is causing the problem, you should uninstall AVG and not just "turn it off".
Also, can you describe how you go about uninstalling a program? For example, how did you "delete" iTunes?

I am getting error 1001 on my ipad 2 while upgrading updates

When click to upgrade updates on my ipad 2 i get error 1001 and says please try again later.

What iOS version is currently on your iPad?
The error number is not included in the 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

I am getting error 1156 when syning ipad and error 4002 in iCloud match

Getting error 1156 when trying to sync my ipad and error 4002 when trying to use icould match how in the **** do you fix it I have tryied everything and even called apple who were no help other than they said they were working on it

Same

HT201210 getting error message cannot restore ipad disk space full ???

cannot restore the ipad its locked up and I am getting an error message that says cannot restore ipad disk space full what to do?
thanks

Well you are going to have to delete something to make room

HT201210 i keep getting error 3194 when restoring ??

I keep getting error 3194 when restoring ipad help ???

From 2nd link below.
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    1.    Install the latest version of iTunes.
    2.    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    3.    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    4.    Try to restore from another known-good computer and network.
    5.    If the errors persist on another computer, the device may need service.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

My Ipad 2 won't restore and I keep getting error 14

So today I decided to finally update my Ipad 2, it was 4.1.3 I believe and the newest update was 7.0.4 . After backing it up and waiting for the long update, suddenly it asked me to restore it. So when I try to restore it, my Ipad turns on and it will show the apple logo with the loading bar, right after that a message pops up in my computer saying that it cannot restore and there's error 14. I don't know how to fix this when I unplug it, it asks me to plug it to itunes since its in recovery mode but i keep getting error 14, help please.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

TS1286 getting error 9 every time try to restore iphone 5 crash on me tell me to go to itunes did it on a pc got error -1 so had a go on my mini mac get error 9 all the time

im update firmware for iphone 5 to 6.1.4 getting error 9 every time try to restore iphone 5 crash on me tell me to go to itunes did it on a pc got error -1 so had a go on my mini mac get error 9 all the time

This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Payables Open Interface Import getting errors out

Hello All,
I am trying to run "Payables Open Interface Import" program to upload the invoice but the program is getting error out, in the log file at the end i am getting the below error:
(Insert ap inv dists 1a) Inside the insert function
(Insert ap inv dists 1) Insert into ap_invoice_distributions
(Insert ap inv dists 1) Insert into ap_invoice_distributions
ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated
Insert_ap_inv_dists<-Create_lines<-Import_invoices<- Before report trigger
(Create Lines 22) Insert into ap_invoice_distributions
create_non_item_lines<-Import_invoices<- Before report trigger
Any one faced this kind of issue?
any suggestions to resolve this.
Thanks & Regards
Aboothahir

Pl post details of OS, database and EBS versions.
Pl see these MOS Docs
Payables Open Interface Error ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated          (Doc ID 357784.1)
APXIIMPT Payables Open Interface Import Fails ORA-00001          (Doc ID 353052.1)
Unique Constraint Violated Importing Invoices With Multi Line Distribution Set          (Doc ID 386323.1)
HTH
Srini

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting error while schedule a webi report

Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
Regards

Hi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj

Getting error while testing a outbound file in oracle B2B11g

Hi,
I am trying to configuare a outbound scenario in oracle B2B 11g.
I have created .ecs file and .xsd file and created a document type also and i am using generic file 1.0 as a lintening channel protocol and trying to read the input xml document from a perticular path.
I had setup partner and agreement also. everything is working fine and also file is succesfully polling from the source folder but i am getting error in B2B as :
B2B-50083
Error Description Machine Info: (infva0325) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
Can anyone guide me how to resolve this error?
I had tried everything but of no use.
Please do reply me with your suggestions.

Hi Anuj,
Please find below xml data which will be saved as .txt file for outbound processing. Let me know if there are any changes i have to do. Please let me know if you need any further information. Listening channel is reading the file but in agreement level it is failing.
<?xml version="1.0" encoding="UTF-8"?><Transaction-DESADV XDataVersion="1.0" Standard="EDIFACT" Version="D93A" CreatedBy="ECXEngine_837" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" CreatedDate="2011-12-14T12:59:40" GUID="{2d323135-3336-3630-3232-313938393033}" xmlns="urn:oracle:integration:b2b:099C29D4C4ED419194917C20ADF8ABC3">
<Internal-Properties>
<Data-Structure Name="Interchange">
<Property Name="InterchangeSenderID">senderID</Property>
<Property Name="InterchangeSenderQual">senderQuali</Property>
<Property Name="InterchangeReceiverID">RecieverID</Property>
<Property Name="InterchangeReceiverQual">RecieverQuali</Property>
<Property Name="RepeatingSeparator"/>
<Property Name="InterchangeApplicationRef">DESADV</Property>
<Data-Structure Name="Transaction">
<Property Name="TransactionID">DESADV</Property>
<Property Name="TransactionControllingAgency"/>
<Property Name="TransactionMessageVersionNumber">D</Property>
<Property Name="TransactionMessageReleaseNumber">93A</Property>
<Property Name="TransactionAssociationAssignedCode"/>
</Data-Structure>
</Data-Structure>
</Internal-Properties>
<Segment-UNH>
<Element-0062>#ControlNumber#</Element-0062>
<Composite-S009>
<Element-0065>DESADV</Element-0065>
<Element-0052>D</Element-0052>
<Element-0054>93A</Element-0054>
<Element-0051>UN</Element-0051>
<Element-0057>EDIT30</Element-0057>
</Composite-S009>
</Segment-UNH>
<Segment-BGM>
<Composite-C002>
<Element-1001>351</Element-1001>
</Composite-C002>
<Element-1004>3364382</Element-1004>
</Segment-BGM>
<Segment-DTM>
<Composite-C507>
<Element-2005>137</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
<Loop-Group_2>
<Segment-NAD>
<Element-3035>SH</Element-3035>
<Composite-C082>
<Element-3039>7393142020009</Element-3039>
<Element-1131 xsi:nil="true"/>
<Element-3055>9</Element-3055>
</Composite-C082>
</Segment-NAD>
</Loop-Group_2>
<Loop-Group_2>
<Segment-NAD>
<Element-3035>CN</Element-3035>
<Composite-C082>
<Element-3039>7350056030012</Element-3039>
<Element-1131 xsi:nil="true"/>
<Element-3055>9</Element-3055>
</Composite-C082>
</Segment-NAD>
</Loop-Group_2>
<Loop-Group_10>
<Segment-CPS>
<Element-7164>1</Element-7164>
</Segment-CPS>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>1</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>210587</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>3</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>1</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>2</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>210510</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>3</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>1</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>3</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>081349</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>1</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>2</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>NB</Element-1153>
<Element-1154>JF074</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>21E</Element-2005>
<Element-2380>20160905</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>4</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>051596</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>1</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>2</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>NB</Element-1153>
<Element-1154>116812505</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>21E</Element-2005>
<Element-2380>20150131</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
</Loop-Group_10>
<Segment-CNT>
<Composite-C270>
<Element-6069>2</Element-6069>
<Element-6066>4</Element-6066>
</Composite-C270>
</Segment-CNT>
<Segment-UNT>
<Element-0074>#SegmentCount#</Element-0074>
<Element-0062>#ControlNumber#</Element-0062>
</Segment-UNT>
</Transaction-DESADV>

Getting Error while posting through KB11N : No true sender object entered

HI Expert,
We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
Now we realised that wrong Internal Order was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
No true sender object entered
Message no. BK175
Diagnosis
You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
Procedure
1. If you require a dual account assignment, enter a true object as a sender also.
We are using cost element with having cost element category 90.
I don't no which is the true sender Object.
Thanks in advance
ealry help will be highly appreciated.

Your postings had happened to a statistical internal order. I hope the real postings might have happened to a cost centre.
You cannot settle anything from a statistical internal order. It is just for information purpose only. If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose.

TS1286 I am getting Error 9 on my iPad.

Similar Messages

Maybe you are looking for