TS1292 how to activat a itunes code that will not redem

how to activat a itunes code that will not redem

I was having the same problem with a card that I received as a gift. Finally, I realized that it's an APPLE gift card and not an iTunes gift card. They are different and one will not work for another. The Apple card is used for hardware, software, cases, headphones, etc that you can buy in store or online. The iTunes card can only be used for music, apps, videos purchased through iTunes.
But as long as it is in fact an iTunes card, the only other thing I've read about it not activating is to wait a few days and try it again. Sometimes it takes a while for the store where it was purchased from to send the activation info to Apple and read it as a valid code. I guess it doesn't happen instantaneously when scanned at the store.

Similar Messages

I have songs in my iTunes App that will not play. It keeps saying that this computer is not authorized to play would you like to authorize it. I would but its asking me to authorize an account that was changed. What do I do????

I have songs in my iTunes Application that will not play. I keeps saying that this computer is not authourized to play name of song would you like to authourize it. The problem is its the old account I had and that has been changed. How am I going to authorize these songs when this account no longer exists.

I posted about this yesterday -- it happened to me, and the solution was incredibly simple. An Apple tech guy had me delete my SC Info Folder, located on my XP in Application Data.
Here is my post:
https://discussions.apple.com/message/15134112#15134112
Here is the link about the SC Info Folder (4th down):
http://support.apple.com/kb/TS1389?viewlocale=en_US
It wasn't every song, just a few of them. A nightmare to figure out what to do, but it was solved upon reboot.

I have DRM protected music from an old iTunes account that will not upload to Match?

I have DRM protected music from an old iTunes account that will not upload to Match?

Your computer needs to be authorized with the "old" Apple ID. Pull done Store > Authorize... And type the credentials when prompted.

TS1292 how to activate my itunes card?

How to activate my itunes card?

What you normally should do when you have an iTunes card that has not been activated is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. If they refuse to help, as some retailers do, or you don't know or can't get to the retailer, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. They will ask for a scan of the front and back sides of the card as well as a scan of the receipt
Regards.

How can I copy a webpage that will not let me highlight it, i.e. use the control c key strokes?

How can I take a picture of a webpage that will not let me use the control C copy command? In other words, on this particular website, I try to highlight a passage that I want to save and put in a document, but the highlighting will not work. I asked them about that, and they simply said they did not have that facility, but I think the issue is protecting their copyrighted material. I know there is some way to take a picture of the page, and then I can use my picture editing software to crop it and enlarge it.

Are you trying to take a "snapshot" in a PDF?
If the part of the page or PDF you want to capture is fully visible, you can use the Windows print screen function to capture it. Either use the Print Screen key to capture the entire monitor display, or Alt+Print Screen to capture the active window.
If you need to do this often, or if you want to save the snapshot straight to disk, or if you need more than fits in a single Windows screen shot, an add-on such as [https://addons.mozilla.org/en-us/firefox/addon/fireshot/ Fireshot] can be handy.

How to fix a Domain file that will not open

We have a Domain file on our Mac Mini that will not open - iWeb keeps saying that it cannot be found, even though it is in the Library/Application Support/iWeb folder. I transferred the Domain file to my GS, and I get the same response - if I switch back to the original Domain file (on the G5), all is well. Obviously, the Domain file from the Mac Mini has gotten corrupted, but cannot determine the exact problem (though I think it may be the index.xml.gz file). I've reinstalled iWeb, checked permissions, deleted (and re-created) the associated plist files - nothing. Unfortunately, our company's web pages are in that Domain file, and cannot perform some much-needed updates. Any help that can be offered would be most appreciated!!

Have you tried double-clicking on the Domain file?

TS1292 How to redeem a iTunes card that the code is not readable

Cannot read code

If the pagr that you posted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

How to resolve a Lenovo PC that will not pass the Lenovo Splash screen with no access to Windows

Here is my problem and here is the solution!!!
My B540 Ideacentre would not pass the Lenovo splash screen. The only operational keys I had was F1 (BIOS) and F12 (BIOS options). F2 went to a light blue screen so no chance of even a one key recovery. Warrenty had expired four and a half months ago. I contacted Lenovo and after the guy told me to try F2 twice he said it was a HDD or other hardware failure and would cost around £200 maybe and also would take about two weeks.
AT THIS POINT YOU SHOULD NOT BE ANGRY FRUSTRATED OR PANIC. REMAIN CALM AND STOP AND THINK WHAT ACTUALLY WAS HAPPENING WHEN YOU LAST USED YOUR PC.
For me I remembered Windows had auto downloaded 8.1 and was asking me to install. Also my keyboard had lost shift W T Y keys. This told me that it was not a hardware issue but a software issue and perhaps from this update. My HDD was not clicking or beeping and this PC has a 2TB Seagate Barracuda which has a good reputation. Luckly for me I also have a Seagate external expansion 2TB and a 500MB expansion which was the HDD from my old HP Touchsmart which I converted into an external hard drive by buying a HDD enclosure with cooling fan and all leads from eBay for £25 and this is where the solution is.
If you can create an expansion drive so easily and access the HDD then why cant I do it with the HDD from my Ideacentre and of course you can. So first unplug your PC or laptop. Next remove the cover and unclip the HDD (which is easy with the B540. See user instructions). Next I removed my HP HDD from the enclosure and fitted my Ideacentre HDD in its place. Next you need a laptop or another PC. Switch it on and then connect your HDD to the laptop or PC via highspeed USB cable. My laptop is running Windows 7 Ultimate and of course has all the repair tools required. When the software has loaded you may get a box that will have two options. The first will ask you if you want to repair your files and the second to scan for bad sectors and to attempt repair recovery of sectors. Tick both boxes and click start. This is a long slow process but worth the wait. Nine hours later my HDD was ready. I connected my Seagate expansion to my laptop and moved all new files that I had not backed up. So at this point you should create a folder and move all your photos music videos documents etc to it. This can take upto three hours if you have never backed up before and are moving everything. Once completed I shut everything down and replaced the HDD into my Ideacentre. Make sure do not have any external devices connected such as expansions external drives headphones etc. Connect the power and switch on. The Ideacentre booted up and there was a pause at the splash screen then it went to a black screen and then by the miracle of logical thinking I was at my lock screen. I was never so glad to see the map of my home land "Ukraine". After jumping up and down with joy I then went in and all was as normal but to be sure I went into safemode and started a complete restore. This is the option where you completely format your HDD and restore as new. It takes a long time but it is the best option because you do not want this to happen again. When this has completed and you are in Windows do not wait a moment longer by playing with your photos or creating your desktop picture. Go to create a recovery drive (use a 32GB stick) and after that also make a copy to disc. Next go to command prompt (cmd) Admin and change a setting by typing bcdedit /set {default} bootmenupolicy legacy. This will now enable your F8 key to boot straight into safemode just incase you need to in the future. It will slow boot time a little but better to be able to get in to Windows than not at all for the sake of a few seconds.
Well I hope this helps someone out there and I know you may think its a lot to do but it is not. Ask a friend to borrow a laptop or PC and perhaps a HDD encloser. The rest is just time but when you see your lock screen you will not care trust me.
Cлава Україні!!! Героям слава!!!

I thought this was the method I used before but I followed through it and it was a horrific fail. "Operating system not found". Can anyone help?
http://superuser.com/questions/421402/how-to-create-a-bootable-usb-windows-os-us ing-mac-os-x
Steps To Achieve Victory
Download the ISO you want to use
Open Terminal (in /Applications/Utilities)
Convert .iso to .img using hdiutil:
hdiutil convert -format UDRW -o /path/to/target.img /path/to/source.iso
Rename if OS X gave it a .dmg ending:
mv /path/to/target.img.dmg path/to/target.img
Type diskutil to get a list of currently connected devices
Insert USB drive you want to use
Run diskutil again to see what your USB stick gets assigned eg - /dev/disk3
Run diskutil unmountDisk /dev/diskN (where N is the number assigned to your USB stick, in previous example it would be 3)
Run sudo dd if=/path/to/target.img of=/dev/diskN bs=1m (if you get an error, replace bs=1m with bs=1M
Run diskutil eject /dev/diskN and remove your USB stick
The USB stick will now be ready to use
Also similarly described here: http://www.tomshardware.co.uk/answers/id-1733410/creating-microsoft-bootable-usb -mountain-lion.html#.

How to store xml data fragments, that will not be queried?

Hello,
Delphi Client application communicates with Java Server application via XML messages. Client sends XML message over HTTP Post method. Java Servlet gets XML message, parses it, performs requested action (select/insert/update/delete), generates resulting response and sends it back to the Client.
I use Oracle DB XE 10.2.
For example: Client sends a request to the server, to append certain Order with new Product info:
Request:
<?xml version="1.0" encoding="UTF-8" ?>
- <Request OrderID="123123123" Action="NewProduct">
- <Product TempProdID="2" ProdName="L01" VisualID="1" Amount="1" TechClass="1" TechSubject="1" TechVersion="0" TechName="TestTech" ElemOk="0">
<Modified UserID="XXX" UserGroup="XXX" GroupLevel="0" />
- <QuickInfo>
<ProdIcon Format="PNG"
Encoding="Base64">iVBORw0KGgoAAAANSUhEUgAAAEAAAABACAIAAAA
lC+aJAAAAA3RSTlP////6yOLMAAAAvElEQVR42u3aQQ6EIAwAQP7/afe0
mo1mBVur0emJgwGmRDFNWwvH9I153OpjyoisefqXW3afm4WypP+MgomvT
z8AAAAAAAAAAAAAAMAzAClzAWQAdvexfqATEKmA/Fm0rYs5ozvoAWyWj4
ZqJ9efQKR8BJAHOPEdKAAc/lLdAhC/K68EBG+JWwAixfABgF8Jf6MAAAA
AAAAAAAAAAAAALwRUGgAAAAAAsgGJ3cfVrcfFl2jiIZzV+V7Zd/8BOtNi
0MnJ58oAAAAASUVORK5CYII=
</ProdIcon>
<Parameters />
</QuickInfo>
- <TechProduct CurVer="1" MinVer="1" TotalItems="330" ItemNodeSize="55074">
- <SubItem Class="TPlGraph" BindID="00B9C004">
<PropList />
- <SubItem Ident="Profiles" Class="TProfileList" Child="1" BindID="0188598C">
<PropList />
- <SubItem Class="TPlProfile" Child="1" BindID="018CA6CC">
- <PropList>
<Property PropIdent="ProfBaze0X" ValText="0" />
<Property PropIdent="ProfBaze0Y" ValText="990" />
<Property PropIdent="ProfBaze1X" ValText="990" />
<Property PropIdent="ProfHier0" ValText="0" />
- <Property PropIdent="InBorder" ValIdent="None" ValText="Nėra">
<ExtValue ColIdent="ItemCode" Value="None" />
<ExtValue ColIdent="Type" Value="" />
<ExtValue ColIdent="Filter" Value="" />
<ExtValue ColIdent="Width" Value="0" />
<ExtValue ColIdent="TechCall" Value="" />
</Property>
</PropList>
</SubItem>
</SubItem>
</SubItem>
</TechProduct>
</Product>
</Request>
I use DOM parsers to parse the received requests, extract certain info and insert it into relational tables using standart SQL queries.
My question is: what is the best way to store XML data fragments, that are not required to be saved relationally? I need to save the content of node <TechProduct> from the above example to relational table's column. There will be no need to query this column, no need to use relational views. I will use it only when Client application will request to modify certain order's product. Then I will have to send back the same <TechProduct> node via XML response.
So what column type do I have to use? CLOB? XMLType? Is it better to use object types? Do I have to register XML Schema for better performance? The size of the fragment can be ~2MB.
Thanks for your help
Message was edited by:
Kichas

Thank you for reply,
As you suggested, I will use XMLType storage as CLOB (without XML Schema).
As I mentioned before, I use Java Servlet, deployed on Tomcat WebServer, to receive XML messages from Client application via HTTP POST method.
I use these libs to get the XML payload and parse it into a Document:
import org.w3c.dom.*;
import org.xml.sax.InputSource;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
And here is the code:
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
try {
// get the XML payload and parse it into a Document
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
Document dom;
InputSource input = new InputSource(request.getInputStream());
dom = docBuilder.parse(input);
catch(Exception ex) {
System.out.println("Exception thrown in XmlService");
ex.printStackTrace();
throw new ServletException(ex);
I create a relational table, that contains XMLType column:
CREATE TABLE xwarehouses (
warehouse_id NUMBER,
warehouse_spec XMLTYPE)
XMLTYPE warehouse_spec STORE AS CLOB;
Now I want to insert all DOM Document into XMLType column. So I do like this:
import oracle.xdb.XMLType;
String SQLTEXT = "INSERT INTO XWAREHOUSES (WAREHOUSE_ID, WAREHOUSE_SPEC) VALUES (?, ?)";
XMLType xml = XMLType.createXML(con,dom);
PreparedStatement sqlStatement = con.prepareStatement(SQLTEXT);
sqlStatement.setInt(1,2);
sqlStatement.setObject(2,xml);
sqlStatement.execute();
sqlStatement.close();
dom is the Document, that I got from HTTP Request input stream.
My servlet throws an exception:
java.lang.NoClassDefFoundError: oracle/xml/parser/v2/XMLParseException
at XmlService.GetMatListServiceHandler.processRequest(GetMatListServiceHandler.java:111)
at XmlService.XmlServiceHandler.handleRequest(XmlServiceHandler.java:43)
at XmlService.XmlServiceServlet.doPost(XmlServiceServlet.java:69)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:716)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
why does he needs oracle.xml.parser.v2.XMLParseException? I don't use Oracle parser? Does this code line throws the exception (I am not able to debug my code, because I have not configured JDeveloper to be able to use Remote Debuging):
XMLType xml = XMLType.createXML(con,dom);
Does it reparses the given dom Document or what?. When I deploy xmlparserv2.jar to Tomcat, everything is ok, application inserts XML data into XMLType column.
Is there another way to insert the whole org.w3c.dom Document or Document fragment (that is already parsed) into XMLType column. Can you provide any sample code?
The Document may contain national symbols, so they should be correctly stored and then later retrieved.
Many thanks.

How to activate ichat - the invite icon will not show

how to activate "invite" in ichat - it won't allow me to click on it.

Hi,
How are you trying to Invite ?
Text Chats
Double click any Buddy in the list should open a chat window for Text chat.
You can now start typing.
Alternatively you can highlight a Buddy and then use the icons at the Bottom of the Buddy List.
The "A" is Text chat.
Another alternative is to go to the File Menu and > New Chat
You then get a Pop up to offer any of the accounts you have set up and a place for the Buddy's name.
You can also Right/Control click a Buddy or Highlight a Buddy and go to the Buddies menu.
Audio Only Chats
Fo this the Show Audio Status option in the view Menu needs to be ticked and the Microphone Enabled item in the Video menu (Will read Audio if no Camera)
Then most of the options above will work.
The Buddy List direct approach is to click their Audio Icon rather than the whole Line.
VIdeo Chats
As above with Show Video Status nd Camera Enabled ticked in the two menus
Group chats/Chatrooms
Go to the File Menu > Go to Chat
Enter room name to either create a new room or enter an existing one.
Go to the VIew Menu > Show Participants.
Drag Buddies to the slide out Drawer.
Send text to Invite them
Do you need more info ?
9:48 PM Sunday; August 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have Acrobat Pro 9 with the serial number. How do I stop the error that will not allow this?

I have lost my hard drive three times and now my Acrobat Pro 9 will not activate with my serial number because it was an upgrade and the error wants the serial number from the previous version. I do not have this information. Please advise, I only have 6 days left before I am locked out. Thanks.

Hi,
Please contact Customer Care at 8008336687 and they would be able to unlock the serial number for you.
Since you said you owned a previous version and you lost the serial number, you can log on to your Adobe account online and check for purchased softwares.
Else if the software was registered the support agent would be able to retrieve that information with the email used to register the software.
Regards,
Ravi.

How do I end an application that will not close

I downloaded Citrix Receiver to my Macbook Pro. Went to try and log on to my work address, the application just keeps spinning and will not let me cancel or close. the red button has disappeared. I even uninstalled the app and I still cannot close or make it go away.

That's OK it take some time if your not a computer junky.
Good Luck, Best Wishes and I'm glad I could help.

How to fix my iPhone keys that will not work

When I am using my iphone keyboard, the upper row Q thru P will not work. That is in verticle mode, when laid horizontally, the R will not work.
On the number keys, the 4 will not work. The comma key also does not work.
I was told that a software restore could cure this. Also, I tried to load the new version 7 software, hoping this might help. But the Accept option would not work when accepting the TERMS from Apple. It seems that only works in verticle so that whole row/area does not work.

RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

How do I redeem an iTunes code that does not have a box around it?

iI bought an iTunes gift and they received the email but it does not have a box around the code and they can't find a way to redeem it.

Howdy Roy,
It sounds to me like you have purchased an iTunes Gift Card and you’re having an issue redeeming it. I have linked to an article that may help in this situation:
If you can't redeem your iTunes Gift Card or code - Apple Support
Contact iTunes Store Support
If the code is completely scratched off or you still can't redeem your gift card, contact iTunes Support:
Go to the iTunes Store support page and choose your country.
From the menu on the left, choose Contact Support.
Click Contact iTunes Store Support.
Follow the instructions.
iTunes Store Support might ask you to send these things:
Image of the full front and back of your gift card
Sales receipt showing when your card was purchased
Serial number from your gift card
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How to deactive a CS3 program that will not open?

I have and old computer with this adobe package installed on it. The hard drive failed and the computer wouldn't boot up. I purchased a new computer and installed the adobe package on it. I call adobe support and was able to activate the programs.
Recently I decided to try to get the old computer to work by formating the hard drive. I got it to boot from the original windows xp disk. Because the CD drive on the computer does not work, I was using an external CD drive. I am still having trouble formating the hard drive with the external CD drive.
When I tried to open Photoshop on the newer computer I got the following message.
" You cannot use the product at this time. You must repair the problem by unistalling and reinstalling this product of contacting your IT administrator or adobe customer support for help."
I am assuming that adobe sees both computers with the same serial number. How do I get the adobe package to work on the newer computer. I don't care if it works on the old computer.

uninistall it, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.
if you need an activation count reset, contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

TS1292 how to activat a itunes code that will not redem

Similar Messages

Maybe you are looking for