TS1292 Our code is damaged and not readable what kind of reimbursement is available.

Hi Itunes
We gave itunes cards as gifts last Christmas.  One of the codes was badly damaged.  The value is $25.  We would like to benefit from this value.  What is our next step?

See this support article:
http://support.apple.com/kb/TS1292
If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
By the way, please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are your fellow users.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Similar Messages

  • TS1292 iTunes card code not readable what do I do

    My I tunes gift card code is not readable What do I do

    See Here  iTunes Store: Invalid, inactive, or illegible codes
    http://support.apple.com/kb/TS1292

  • Am I the only S5 owner who has ALREADY has the USB cover break off with regular use, AND have Verizon and Samsung say it is damage and NOT a mfg. defect?

    I bought the S5 less than two months ago through Verizon, not Amazon.  One of the selling points is that the phone is water and dust resistant.  The USB port comes with a little flap plug attached to the phone by a rubber or plastic pin.  To charge the phone, this plug is pulled aside, then replaced after charging.  In less than two months, the plug attachment broke.  Calls to Verizon resulted in the following: They told me I needed to contact Samsung directly.  I told them that I did not buy the phone from Samsung.  They agreed to call Samsung directly while I was on hold.  When they came back on, they told that Samsung said that this problem was phone damage and not manufacturer defect.  The fix would be done at my cost.  Verizon said that they would change me $300 if I sent the phone back to them.
    I don't believe this dust cover is critical to the enjoyment of the phone, but it is discouraging to think that Samsung should sell a phone for $600 with such a manufacturer defect, and that Verizon refused to go to bat for a customer.

    Did you look at your own link?  It's not available yet.  I don't know how to state that more clearly.  If it was available, I would have said, "I was also concerned about that flimsy cover breaking off so I purchased a Samsung QI charging cover for my phone.  That way I don't have to mess with the USB port cover."  But it's not available yet so I said I'm impatiently waiting for it to be released.
    And before you get all excited and tell me how stupid I am, most of the items on your link are for the S3, S4, and Note 3.  Those are entirely different phones.  The only S5-specific QI products available now are 3rd party units that are held in place with tape and look pretty hokey.

  • I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?

    I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?

    It's possible, I suppose.   Unlikely, but possible.   Someone would have to be extremely driven to fix your broken phone specifically to look at your notes though.

  • While posting T.code VL02N "co object not found " what have to do

    Hi
    Friends..
    while posting T.code VL02N "co object not found " what have to do
    General Ledger related to Co object what i want todo.
    showing error " Co Object not found"
    Thank you.
    Ashok kumar

    Hi
    Assign a cost centre to the cost element of the general ledger account specified.
    Transaction KA02
    another option is got OKB9 and assign cost center to GL account at company code level.
    regards
    Srinivas

  • Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

    Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

    tammersalem wrote:) <-HDMI-> (HDTV)
    My main concerns are:
    -If I use iTunes on my main computer, will it then be available to Apple TV?
    -If I use Apple TV to download will it be available to my Main computer?
    -Can the Apple TV use a media server for storage over LAN (using NTFS Samab or otherwise)?
    Basically iTunes feeds AppleTv with media either syncing (copying to it) or streaming live.
    Media must be compatible with AppleTV.
    AppleTV requires a proper iTunes instance running - it cannot access a NAS directly.
    If you store media in a folder on a NAS and it's part of the computer iTunes library (just stored on the NAS vs internal/external drive), then when running iTunes makes this content available to AppleTV.
    Data will travel:
    NAS > network > iTunes > network to AppleTV
    As the path is potentially slower than internal/external attached drive > iTunes > network > AppleTV, it may or may not work robustly for streaming.
    If AppleTv is set to sync (it can also stream in this mode), when you purchase direct on AppleTV, the media should sync back to where the itunes library is stored (via iTunes) to keep things in sync and to allow you to backup the media.
    You cannot drag/drop media to/from AppleTv across the network, nor can it directly access storage itself - iTunes is an essential cog in the wheel.
    The majority of commercial 'in-built iTunes media servers' will not work directly with AppleTV as it has to be 'paired' with iTunes by entering a numerical code in iTunes and does not simply see 'shared libraries'.

  • Backup itouch on another mac and not lose whats on itouch when sync

    backup itouch on another mac and not lose whats on itouch when sync

    Make sure your new Mac is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
    This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
    Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
    Set up at least one contact and event on your new Mac, to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
    The rest of the data can be restored from the backup you made.
    Restoring: http://support.apple.com/kb/HT1414
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    You can save other data following this article: How to back up your data and set up as a new device

  • My Lightroom program keeps freezing and (not responding) what can I do?

    My Lightroom program keeps freezing and (not responding) what can I do?

    What version?
    What operating system?
    When?
    Are you getting any error message?
    Has it ever worked before?

  • TS2529 my iphone is recovery mode and not working what to do?

    my iphone is recovery mode and not working what to do?

    plz help me to get this problem  repair

  • Its not at all startning and not giving any kind of error msg, and i restared pc many times and uninstall and installed many times, but still its not opening

    .its not at all startning and not giving any kind of error msg, and i restared pc many times and uninstall and installed many times, but still its not opening

    Also, if you downloaded earlier in the week, make sure you have the 37.0.1 updated that was released on Friday (I think).
    If needed, I suggest installing a slightly different way the next time:
    '''Clean Reinstall'''
    We use this name, but it's not about removing your settings, it's about making sure the program files are clean. As described below, this process does not disturb your existing settings. Do NOT uninstall Firefox, that's not needed.
    (1) Download a fresh installer for Firefox 37.0.1 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
    (2) Exit out of Firefox (if applicable).
    (3) Rename the program folder
    ''(64-bit Windows folder names)''
    C:\Program Files (x86)\Mozilla Firefox
    to
    C:\Program Files (x86)\OldFirefox
    ''(32-bit Windows folder names)''
    C:\Program Files\Mozilla Firefox
    to
    C:\Program Files\OldFirefox
    (4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
    Any difference?
    Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
    * \OldFirefox\Plugins
    * \OldFirefox\browser\plugins

  • HT1351 for syncing it takes long time and not completed what to do???

    for syncing it takes long time and not completed what to do???

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

    Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Errors related to downgrading iOS

  • Change the language of iphone from English to Chinese and iphope are not  normally loaded and not opened. what can I do to restore it;

    change the language of iphone from English to Chinese and iphope are not  normally loaded and not opened. what can I do to restore it;

    I found a fix for it, It turned out that the file that lists all of the songs on it got corrupt. I had to use 3rd party programs but it did work out in the end
    Here is a link to where I found the fix: https://discussions.apple.com/thread/3631590?start=0&tstart=0
    I followed the instructions of Geekdad3 a little bit lower on the page.
    Good luck for anyone else who has this problem

  • I am traveling to India, north and south, with my ipad 2, G-3. It is activated by AT and T. How do I use it in India? Do I need to purchase a sim card there and if so what kind? Would they be available in the Delhi airport or where else in central Delhi?

    I am traveling to India, north and south, with my ipad 2, G-3. It is activated by AT and T. How do I use it in India? Do I need to purchase a sim card there and if so what kind? Would they be available in the Delhi airport or where else in central Delhi?

    Also in order not to pay a fortune for the service is it better to acquire if needed a SIM card only once there?
    Check with your carrier about roaming charges.  They are usually prohibitive.  Best to get a local SIM.

  • Distribution mobileprovision and Developer mobileprovision what kind of files can be uploaded

    Distribution mobileprovision and Developer mobileprovision what kind of files can be uploaded
    Hi
    Im trying to opload Distribution mobileprovision and Developer mobileprovision files in the DPS Viewer Builder, but cant see what i need
    I have tre .p12 setificats but none of them are able to be selected when i browse.
    Must be doing something wrong here, just wonder what ... can you hel?
    Helen

    Go through the attached Publishing Companion Guide. You need to create Mobile Provisioning files using Apple iOS provisioning Portal. The guide gives you step by step information on creating these.

Maybe you are looking for

  • Deploymemt error

    am getting the following error while am deploying my pdk portlet in Oracle application server 10.1.2. Please help me in this regard. ---- Deployment started. ---- Oct 8, 2009 2:55:03 PM Target platform is Oracle Application Server 10g 10.1.2 (Windows

  • Fonts not available on 10.5

    Just updated to OS 10.5, but now some fonts that were available before are no longer available. Message was edited by: Twm Prys

  • Adobe Photoshop Elements in English, Update in Spanish

    I have a Adobe Photoshop Elements Language Version: 8.0.0 (8.0 (20090905.r.605812)) Operating System: Windows 7 64-bit in english, But I want to upgrade to last version in spanish, Can I upgrade this way? or I need to buy a full version again?, Regar

  • CRM customer  fact sheet with Business Objects reports

    Hi, We want to show business objects reports at customer fact sheet area. Is it technically possible? Do you have any ideas? Thanks Ozge

  • New Initial Extraction for MDM

    I am running a new initial load in my ECC system for MDM (MDM_CLNT_EXTR).  It is running a bit longer than I expected and I was wondering if I needed to (or should have) removed the initial load records from table MDM_SELECT_TRANS using MDM_SERV_SELT