TS1292 When I scratched the code, the letters came off with. I can read two X, one Z, S, R, and N, the rest are illegible
When I scratched the code the letters came off with. I can read two X, one Z, S, R, and N, the rest are illegible
Try here > iTunes Store: Invalid, inactive, or illegible codes
Similar Messages
-
hi, I've got itunes music card for my birthday and when I scratched the back to redeem the code everything gone, so no code, what can I do? I've been to tesco to customer service and they told to contact itunes support
These are user-to-user forums. If the page that you posted from doesn't help then you can try contacting iTunes Support via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
My itunes card that i bought yesterdAy dont work cause when i scratched the back for the code the ink took off
You'll need to contact support and ask them to find the code for you. Don't forget to include the serial number of the card for their reference.
iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292
http://www.apple.com/support/itunes/contact/ -
when i scratched the back of my itunes voucher some of the code came off/is not visable. is there anything i can do ???
Contact the iTunes Store by going to - http://www.apple.com/support/itunes/contact/. At the bottom left, you will see a "contact support" link. Just select it, then select "iTunes Store", then "iTunes Cards and Codes". Follow the on screen instructions.
-
When i scratched the redeem code off some of the code came off
when i scratched the redeem code off the itunes gift card some of the code was scratched off to so how do i redeem the card if i cant read the code?
iTunes Store: Invalid, inactive, or illegible codes
-
When pressing enter the values are converted to upper case in module pool
hi
tehre are three fields for maintanece in module pool
wheni press enter the fields are converted to upper case i want to avoid this as i dont want to have the upper case
i need to save in table as waht user has inputed not in upper case
so i dont want the fields to be automatically converted to upper case whne pressing enter on screen
regards
Nishanthi Nishant ,
<b>The solution to ur problem is breifly explained with a sample module pool program .</b>check it below :
IN the TOP INCLUDE**********************
DATA :
wempid TYPE z7684dp-empid , " same name as in the screen declaration
wname TYPE z7684dp-name,
wacc TYPE z7684dp-account,
wdesg TYPE z7684dp-designation,
ok_code TYPE sy-ucomm ,
wa_z7684dp TYPE z7684dp,
t_z7684dp TYPE STANDARD TABLE OF z7684dp,
*****IN THE PAI OF THE SCREEN 100(for example)***********
MODULE user_command_0100 INPUT.
CASE ok_code .
WHEN 'CRE' . " function code for the pushbotton to insert the values
TRANSLATE wdesg TO LOWER CASE.
TRANSLATE wempid TO LOWER CASE.
TRANSLATE wname TO LOWER CASE.
TRANSLATE wacc TO LOWER CASE.
wa_z7684dp-empid = wempid .
wa_z7684dp-name = wname .
wa_z7684dp-account = wacc .
wa_z7684dp-designation = wdesg .
INSERT INTO z7684dp VALUES wa_z7684dp .
IF sy-subrc EQ 0 .
MESSAGE 'SUCCESSFUL INSERTION TO TABLE' TYPE 'I' .
ELSE .
MESSAGE 'UNSUCCESSFUL INSERTION TO TABLE' TYPE 'I' .
ENDIF.
CLEAR: wa_z7684dp , wempid , wname , wacc , wdesg.
REVERT BACK WITH ANY FURTHUR QUERIES
<b>DO REWARD WITRH POINTS IF USEFUL :)</b> -
when i open reader two AcroRd32.exe*32 processes open and do not close after closing the reader. i have seen 10 AcroRd31.exe*32 processes open. do I have an undetectable virus or is the software just poorly written and tested. I am running Windows 7 premium that is fully up to date and the reader is up to date also. i have even deleted reader and reinstalled it.
All 8 Processors activity jumps really high while AcroRd.exe*32 is running with no pdf documents open and as soon as i end the processes the processor activity goes down to near 0 according to the performance tab in task manager. My fan also kicks on because of all the heat from the processor.open acrord32.exe and go to edit, preferences, internet, and then uncheck "Allow fast web view" and "allow speculative downloading in the background". This will save your processor and keep your system from locking up from all of the acrord32.exe processes running.
-
I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?
Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless -
Just the other night my phone desided to reset itself, and when i went to restore it it came up with The iPhone iPhone could not be restored. an unknown error occurred (-1).
Please Help i need this phone....and i dont have the money to replace it!I havent jail broken it so its probable a hardware issue then.......well then.......
anyway thanks man
Cheers! -
Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an error appears on the pages with video content?
its in german:
der Vorgang könnte nicht abgeschlossen werden.
something like the process coundnt be completed -
In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
When I type I cannot add text when I select the text area and double click. Why?
When I type I cannot add text when I select the text area and double click. Why?
Premiere Elements 11 trial version for macMac computer photos uploaded to the timeline just finetrying to make a new title, streaming or in a framedouble clicked on the text in the box and nothing shows up when I type on my keyboard. I can delete the words that are there but not type in new ones. I selected the type and size, etc.
Thanks if you can figure it out. I gave up!
I may just un-install it all together if I can't get to work.Joanne
Date: Thu, 9 May 2013 17:59:08 -0700
From: [email protected]
To: [email protected]
Subject: When I type I cannot add text when I select the text area and double click. Why?
Re: When I type I cannot add text when I select the text area and double click. Why?
created by A.T. Romano in Premiere Elements - View the full discussion
Joanne Murray J2 What version of Premiere Elements are you using and on what operating system (including 32 or 64 bit) is your Premiere Elements installed? Forgive the questions if you have been there and done that, but I do not want to take anything for granted that might hinder a speedy resolution to your issue. Are you opening an already created title that is sitting on the Timeline in order to edit it in the Titler or are you trying to create a new Title (Default Text or other)? Do you know how to work with the Selection Tool and Type Tool in the Titler? Once I know what version of Premiere Elements that you are using, I will give you specific how to details. Thanks. ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5307494#5307494
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5307494#5307494
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5307494#5307494. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Help: An error when I initial the planning areas:internal error
Hi,
An error when I initial the planning areas, I create time series objects for planning area DP01, system show an error message to me as follow:
internal error [/SAPAPO/OM_TS_TGRID_CREATE]
Message no. /SAPAPO/TSM099
Thanks,
ThomsonHi Thomson,
I think in planning area you did not only add the time series key figures
to the planning area but also defined key figure semantics for those
key figures. This must not be. To see those semantics you can check
the key figure details in transaction /SAPAPO/MSDP_ADMIN on the
key figure tab by selecting key figure details. For the time series
keyfigures, the semantics column is filled with values like 300, 301,
etc. If you wants to use time series key figures in addition
to the standard SNP-key figures, the semantics field has to be empty.
You can compare that with the settings in the other planning area where
everything is working fine.
If this is not the case then please refer the below note and execute the consistency reports as in note:
577038 Data inconsistencies in SNP
Regards,
Sunitha. -
Unselect Spark List when clicking in the empty area?
Hi there.
I'm wondering if it's possible to unselect a Spark List when clicking in the empty area?
I've attached this function to the list's click event:
protected function list_clickHandler(event:MouseEvent):void
list.selectedIndex = -1;
But the list gets unselected even if I click on a item in the list. Is there a way to prevent the event when clicking on an item?
Thanks a lot!:)Hi
It's because the event bubbles all the way up. You have to explicit stop the event doing so.
You can do it within an "item_clickHandler(ev:Event)" where you can stop propagation via the Event stopImmediatePropagation or stopPropagation methodes... -
In bridge on CS5 there is one folder I opened up today and in that folder I can only see a small percentage of thumbnail previews of the images. The rest are this small blue icon. How do I get my thumbnail previews back? If I click on this icon it will open the image up okay in photoshop but I would like to see my thumbnail image to see what picture I am opening up. Can anyone help?
Well ... i purged my cache and the previews came back. Thank you for looking.
Maybe you are looking for
-
I have an Iphone 4 and when i plug the phone into the USB port on the computer, it keeps blinking. It blinks continuously between charging and not charging. It makes the sound as if you were plugging it in and unplugging quickly
-
Can I purchase applecare plus from Apple if the Iphone is purchased from a separate dealer (e.g. Costco)?
-
Mail sending through proxy client
I have the following simple code to send mail through a SOCKS proxy client: package com.apna.beans; import java.util.Properties; import javax.mail.*; import javax.mail.internet.*; import javax.activation.DataSource; import javax.activation.FileDataSo
-
WIS 30902 Error when opening a webi document from Rich client
Hi , When I try to open a webi document from local folder or import from CMS in Webi Rich client, I get the following error message. "An error occured while checking the document security. (WIS 30902)" Has any one come across this issue? Thanks, Kart
-
I need display a control depending of the user logged in the SO exists on a active directory specific group. Is it possible? The form is design in Adobe LiveCycle ES4, THANKS