TS1315 My camera is not opening to take a picture
My camera is not opening,and unable to take apic
If you are talking about "tethered" shooting, taking a picture will connected to the computer, iPhoto does not support that. Your camera may have come with software to do that (Canons do). Otherwise, you will need Aperture which does support tethered shooting.
Similar Messages
-
Camera shutter wont open to take a pic....???
camera shutter wont open to take a pic....???
The most popular thread on this has nearly 25,000 views. Below is the follow-up post I put on that thread and all these related threads.
If it was just a hardware problem, Apple should fix it for all of us. But I can't quite understand how it's a hardware problem when the problem is not common to all my camera apps; the Apple camera app does not work at all now, but I can take regular pics with other camera apps I have.
But still, trying to switch to FaceTime/self-portrait mode results in total failure and the need to restart....if it was just a hardware issue I'd expect it to not work for all apps.
ADDENDUM TO INITIAL POST:
I initially posted: "keep talking it up on Discussions and send Feedback." Now I encourage us all to SEND FEEDBACK.
Feedback is different than discussions. FEEDBACK is set up to take reports of bugs or problems and just posting on Discussions may not be noticed properly.
To send Apple FEEDBACK for the iPodTouch go tohttp://www.apple.com/feedback/ipodtouch.html
My Feedback was:
QUOTE: "Dear Apple, many, many problems are being reported about camera malfunctions. One thread in Discussions ishttps://discussions.apple.com/thread/2595775?start=30&tstart=0 that has over 60 complaints and there are several other threads about this, so something is obviously wrong.
Thanks for your attention to this. Apple is a fine company and hope it continues that way. The camera is a key feature of these products: the iPod Touch and iPhone. Not having the camera work properly is ridiculous. Some software fix needs to become available.
Sincerely... END QUOTE
After you Submit the Feedback you get this message:
Thank you for your feedback on the iPod touch.
We cannot respond to you personally, but please know that your message has been received and will be reviewed by the iPod touch Team
So we won't get personal reply but this needs to be done for the good of us all.
Don't depend on someone else to do this -- you/we need to each do this. -
Ipad 2 Back camera does not open
Just bought an ipad 2. the back camera does not open! can't take pictures! any suggestions?
The only other thing I could suggest is restoring the ipad. Here is a link. http://support.apple.com/kb/HT1414 I have heard of cases where the camera was malfunctioning and they have had to replace the ipad
-
Ipod touch camera does not open
have ipod touch, model PC547ZP version 5
upgraded to OS 5 had all worked till other day now the camera will not open.
tried powering on and off with no change
know can restore but conserned might lose data etc
anyone know of anything I can do to resovle this other than resetting itMaybe this can resolve it (you should normally not lose data following this method):
1) Sync your iPod touch with iTunes (iTunes will also create a backup automatically).
2) Reset your iPod touch: http://support.apple.com/kb/HT1430
3) Restore your iPod touch from backup: http://support.apple.com/kb/HT1414 -
My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?
Tried that and it still isn't working. Not sure if it's software thing but I just noticed when I swipe up my control center the flashlight option is not available as well. I'm not sure why this is. I have a 5s with the newest software. That's for the suggestion
-
The camera of my Ipone 4 is not focussing and takes blurry pictures up close...
The camera of my Ipone 4 is not focussing and takes blurry pictures up close... I also cannot use apps like i-nigma because it won't recognise the sign.
Can anyone help me with this?Hi there Brittney827,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
Camera is not opening in my 3GS
Hello,
I have a problem with my iPhone 3GS
The camera is not opening, I have already restored but it is the same...
I don't know what to do...
please helpOn another point, you need to update your ACR (Adobe Camera Raw) plug-in to ACR 8.7.1 CS6 version ASAP. You have the original release that shipped with CS8, namely ACR 7.0 which DOES NOT support your camera model.
The Canon 5D Mark III was supported by the first time in ACR 7.1. The current version for Photoshop CS6 is ACR 8.7.1.
~~~~~~~~~~~~~~
Also is there anyway I can actually talk to a customer support technician via Adobe?
Not in this forum.
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation
Brace yourself for a lengthy, probably not so fruitful experience with the Adobe support staff in India. -
i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
Having trouble with iPhone 5 camera shutter not opening
Any ideas what I can try. Sometimes it works and other time the shutter locks up.
Hello Wildcat74
There are some steps to try out that I have highlighted for you in the article below for iPhone hardware troubleshooting.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera is not functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist ,please help me
uninstall all iTunes,5 programes,this worked for me after reinstall them
-
I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?
carolweiler wrote:
I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?
See:
Camera Raw plug-in | Supported cameras
You need the 8.2 version of the ACR module, and PS10 is too old to be updated.
So, you can choose between 3 solutions:
- update PSE to PSE12
- use the Canon software to convert the raw files to the tiff format which PSE10 can handle
- download and install the free Adobe DNGconverter which is able to convert a whole folder of CR2 raw files to the Adobe DNG raw format which PSE10 can handle.
The last two solutions are free. -
What can i do,my camera does not open
my camera does not open,what can i do!!!!
someone asked the same question before,why theres no anwser!!
T0Ti tried restting ,but it does not help!!!
T T -
Nokia E5 Camera Is not Opening
Dear All,
I have been Facing Problem Since yesterday that My Nokia e5 Camera is not opening. Whenever I try to Open Camera It is not opening and retard me back to the previous screen where I have selected camera Icon.
Does any one Help me in this regards cause before yesterday I was working fine now functionality is not working.
Regards
Rameez
Solved!
Go to Solution.Hi saamli,
Thanks for your post and welcome to the Nokia forum.
We are really sorry for this inconvenience.
In order to fix this issue, I would advise you to check if your phone's software is up to date via this link, enter *#0000# on your keypad to display your current version.
If your phone needs to be updated, connect it with Nokia suite and click on the green arrow icon. Any available updates will be listed here.
If the problem persists, I would suggest you to contact your local Nokia care point to get your phone checked. If it needs a repair, it could be done there.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
Pfrancoise
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated. -
My front camera is Not open and the front speaker too
My front camera is Not open and the front speaker isn't work too
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Camera shutter not opening on iPhone 4s
I've had my iPhone 4s for about two months. It had been working perfectly.
After a recent drop that required the front glass to be replaced, my cameras are no longer working properly. The shutter for the rear camera will not open at all. The front camera will only work through a third party app called "AutoShutter" that was recommended to me. The phone is still working perfectly, otherwise.
Is this reversable? Can I get my 4s cameras working again? I've tried the following:
1) Soft reset with home/power buttons
2) Downloading other software apps to run the camera
3) Deleting all photos in my phone
4) Full reset of the phone to factory settings
Your recommendations are much appreciated. I'm waiting with baited breath in hopes that this is not permanent! I did not get the warranty or insurance. Thanks!i have the same problem, took it to apple store they said is a hardware problem, how could be possible if it WAS WORKING PERFECT BEFORE, very frustrated with them.. i've tried EVERYTHING in the world.. restarted factory settings recovery mode etc etc etc. nothing worked for me. and i forgot.. the phone never turns off just reboot and the sound goes off and comes on whenever it wants....
Maybe you are looking for
-
My iPhone and iPad are on my moms icloud account and i just got a macbook air and i want all my devices on my own iCloud account - i went to all of my settings and it won't let me change my iCloud account on my phone and iPad. can i change this?
-
I want to unzip OpenOffice 1.0 files inside the OJVM but it fails into the native method java.util.zip.CRC32.updateBytes(CRC32.java). The first execution of the code runs OK, but the second not. After a long wait it shutdown the connection and the or
-
Master Collection CS5.5
Application Manager Enterprise Edition will not recognize \\MasterCollection CS5.5\Adobe CS5_5\setup.exe as a valid installer when I attempt to create the build . Why?? This method works for all other pieces (Dreamweaver, FlashPro, Design, etc).
-
hi, I am trying to import some classes into my java file.The path is as follows: "c:\tinyos\tinyos-1.x\tools\java\net\tinyos\mcenter\treetable".I am importing the classes in the treetable package. when I write import tinyos.tinyos-1.x.tools.java.net.
-
Can I lock Regions in place?
Hi, can anyone tell me if its possible to some how lock regions in place on the arranger so they cannot be moved accidentally?