TS1347 Calendar does not allow for setting up appointments

I can't get my calendar to open and add appointments? I need this as o have a hectic schedule. Any ideas as what happened or how to
Fix this?
Thanks in advance!

You mean the Calendar app will not open? Try restarting or resetting your device.
http://support.apple.com/kb/ht1430

Similar Messages

Does not allow to set time characteristics while performing Partition

I had loaded the monthly inventory cube without setting any partition.
Now, when I tried to partition the cube thru RSDCUBE >> Change >> DB performance >> Partition, the time characteristic is greyed off and does not allow to set.
Is it becuase the cube had been loaded? Can I perform the partition now that I had compressed the request in the cube?

Yes you are correct....You want to modify an InfoCube into which data has already been loaded. You use remodeling to change the structure of the object without losing data.
You use partitioning to split the total dataset for an InfoProvider into several, smaller, physically independent and redundancy-free units. This separation improves system performance when you analyze data delete data from the InfoProvider.
You can only partition a dataset using one of the two partitioning criteria u2018calendar monthu2019 (0CALMONTH) or u2018fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
But you are trying to partition the cube which already has data so...You choose Repartitioning...
Repartitioning can be useful if you have already loaded data to your InfoCube, and:
●      You did not partition the InfoCube when you created it.
●      You loaded more data into your InfoCube than you had planned when you partitioned it.
●      You did not choose a long enough period of time for partitioning.
●      Some partitions contain no data or little data due to data archiving over a period of time.
Let me know if you need help with the steps to perform repartitioning

TS1702 My calendar app (Tuesday 1 Calendar) does not allow me to add events. There is no Calendars or + at the top of the app.

My calendar app (Tuesday 1 Calendar) does not allow me to add events. There is not a (Calendars or +) at the top of the application. Previous iPhones I have had had this feature. Please advise

Go to Settings>iCloud, turn Calendars to On.

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video-.with no way to edit full format video. Is this statement true?

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video….with no way to edit full format video. Is this statement true? Does iMovie support HD 1080p @ 60 fps?

Iggy826 wrote:
… Is this statement true?
yes and no!
using the intended Import from Camera routines, iM converts automatically in its very own AppleIntermediateCodec. so, answer is yes.
but …
a) Apple claims , aic is non-lossy intermediate codec. working with proRes in FCPX taught me, there are even less non-lossy-ness codecs
b) iM offers an Archive feature, which is basically a simple Finder/copy operation which 'clones' your SDcards content into some folder on your harddrive; e.g. you can later use these untouched 'raws' in another editor such as FCPX. so, answer is no.
c) when you 'override' the import routines by manually re-wrapping mts into a mov container, iM handles the 'native' h264s ... so, answer is no.
d) adding any effect, transition etc. reduces any interlaced source to 540p. (if you're working with 720p source, res is kept) … so, answer is yes. or, in 720p case, no.
< Johnny Depp's voice >… savvy?
Does iMovie support HD 1080p @ 60 fps?
via Import from Camera? No.
via re-wrapped mts>>mov? I was told yes, some say no.
one thing to be kept in mind when talking about these 'issues':
iM, this 12€, is meant as a CONSUMER toy tool.
it supports AVCHD vers1 (=no 1080/60p, no >24Mbps, no 3D).
fingers crossed, we'll see soon some iM/QT/FCPX update for support of AVCHD v2 ........
the main consumer devices are within the specs, iM supports.
using professional equipments makes usage of professional software (FCPX, AP) optional.
sorry for lengthy answer.

Password Altering in SQL Dev 3 EA4 does not allow for non alphanumerics

As the password change syntax does not include quotation marks around the password, anything that contains non-alphanumerics results in invalid SQL.
You can also enter " characters in the password dialog which would allow for the following string:
"!test0" in the password text box would result in:
ALTER USER "TEST" IDENTIFIED BY "!PARIBAS_WORKSPACE_OWNER0"
With !test0 in the password dialog, you get this:
ALTER USER "TEST" IDENTIFIED BY !TEST0;
I would reckon that " is an invalid character in the password field and you always enclose the password in the generated sql in "'s?
Edited by: user12045690 on 03-Mar-2011 04:19

As the password change syntax does not include quotation marks around the password, anything that contains non-alphanumerics results in invalid SQL.
You can also enter " characters in the password dialog which would allow for the following string:
"!test0" in the password text box would result in:
ALTER USER "TEST" IDENTIFIED BY "!PARIBAS_WORKSPACE_OWNER0"
With !test0 in the password dialog, you get this:
ALTER USER "TEST" IDENTIFIED BY !TEST0;
I would reckon that " is an invalid character in the password field and you always enclose the password in the generated sql in "'s?
Edited by: user12045690 on 03-Mar-2011 04:19

I downloaded iOS 6.1.1 to my iPhone 4 and now my calendar does not allow me to move away from a daily view. Does anyone have a solution please?

Is anyone having problems with their iPhone calendar after downloading iOS 6.1.1? Mine will not allow me to use the normal functions and only displays a day view. I can only change the day by scrolling chronologically. Any assistance appreciated. Bjwiebe.

Have you tried a reboot by holding both the power and home buttons until the apple logo appears and it restarts...ignore the red slider if it appears.

I am trying to download...but the link does not allow for downloading ? !

I am trying to download the FireFox software but the page does not give me a link to execute ....I see the area for the down load but when I put my curser on it it does nothing

Try this page - http://www.mozilla.com/en-US/firefox/all.html

In upgrate 22 and 23.0 the bookmarks toolbar dissapears and after crashing firefox does not allow for recovery

I hate this new upgrade. I basically can't use this browser anymore. I only need firefox to do a few things correctly but if it cannot do these things I cannot use it<br />
1. If firefox crashes (which it does every 30 minutes it just closes completely) then I need for it to be able to restore / recover all previously opened windows when I start it back up again. It does not do this anymore.<br />
2. I use the bookmarks toolbar all the time but frequently it shows up completely blank. So now the only way I can see the bookmarks is if I go to options and deselect bookmarks toolbar and then reselect bookmarks toolbar.
This is so frustrating and worse you make it so you cant do rollbacks! That is insulting and makes me want to not use your browser. A browser is a critical tool not a toy but you guys won't stop playing with it.

Hi joshuad31,
Sorry you are having problems. It should not be crashing and should not be messing up your bookmarks. I do not have any such problems.
*If Firefox is actually crashing, as opposed to hanging then a couple of the Crash IDs would help.
** see [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]
* if firefox has been frequently hanging and restarting offering the option to restore sessions then that has probably overloaded the session restore and you will need to delete the multiple copies of files.
** see [[Firefox hangs or is not responding - How to fix#w_delete-duplicated-session-restore-files]]'''_delete-duplicated-session-restore-files'''
** you will loose information doing that, normally I would suggest bookmarking the open tabs, but I am not sure that would work for you.
To get Firefox running again you may initially need to use Firefox's safemode and disable all your plugins. Or do a reset.
* [[Troubleshoot Firefox issues using Safe Mode]]
*[[Reset Firefox – easily fix most problems]] (Read the warnings before you try this)
I note you have VMware, scripting software and an enterprise edition extension. Is this machine used in an enterprise / corporate environment ?
I will deal with the bookmarks toolbar issue later, crashing/hanging is a higher priority.

Write File.vi does not allow for offset entry

I am using a Write File.vi to write data to my hard drive like always but I have never used the offset before and it is not allowing me to enter an offset value and the error message does not make sense. The error says you have wired different data types but then say source long, sink long which are the same in my eyes.
Is there a trick to using the offset?

If you are writing to file different data types, the use of input is not allowed because it depends on the number of bytes used to store the type (that's why it should be just one type)

IPhone calendar does not sync new events and appointments from Outlook

iTunes 9.2.0.61/iPhone 4.0.1 - does not sync newly added events and appointments! Previously added stuff is all there, new stuff added in Outlook 2007 just doesn't show up. I've gone back to my old Palm T|X which syncs all this stuff with no problem, so it's not an Outlook bug.
It looks like Apple has put a team of junior programmers on the Calendar app - I've seen leap-year bugs (still there), events showing up on the wrong day (still there), and I'm still waiting for the "week at a glance" view. Calendar is SO important for business use that top level "gray beard" engineers need to be on this. (Question for Apple's calendar developers: what's Zeller's Congruence? It they haven't heard of it they have no business doing calendar programming.)

Spontaneously started syncing again - no idea why now, nor why it failed for so long. Related to the alarm bug? Who knows...

Vista Calendar does not work for me in newest vers...

I have tried the newest version of Vista Calendar sync on Nokia PC Suite (6.85++) and it is buggy.
In one instead, I selected the calendar type (Vista) and name (Mark's Calendar) in the Sync settings in PC Suite, and when I synched both ways, and then went into calendar, the entries were not there. And also, Windows Calendar had now a new calendar for me, called "Mark's Calendar (2)".
Then, on another occasion, when I selected to force the updating direction ONLY TO the computer (i.e. copy all entries from phone to computer) only some events get copied (the recurring ones). And I can't seem to get the direction FROM the computer TO the mobile's calendar.
For example, I set up a day in the Vista Calendar, Christmas, December 25. It just doesn't show up in the mobile calendar, even when I force the direction (FROM VISTA TO PHONE). Yet, it sometimes works the OTHER way around (but flakily).
In one instance, I managed to get a recurring event sundays at 1 PM to copy from phone to computer, but then when I did a second synchronization, it somehow created a duplicate event, same time, but Sundays at 7 AM, in addition to the 1 PM one that already existed.
Anyway, all in all, this thing isn't working for me just yet, it's too buggy, and I would love to hear feedback from anyone on any aspect of this. I never had Outlook installed on this machine. If a Nokia rep is reading this, please get back here or by email.

Hi, you are absolutely right, its very buggy, but only with Vista, so could be 6 of one and half a dozen of the other. If you go to Import you can import the transferred data from the base calendar to the current one. Using latest Nokia suite / CA53 cable and 6234(firmware updated) and its fine in both directions on XP and Outlook '97

Calendar does not allow 2nd alert option

I'm using an iphone5 with the latest update (6.1.4) on AT&T network, as does my coworker. She can set an alert then a 2nd alert for a calendar event (ie: 1hr before and 1 day before). I can only set one.
I see the Default event alert option in Settings but I used to be able to set 2 alerts in the event. How do I get both alert options back?

Hi KT,
I don't use iCloud or have my calendar synced with anything (that I'm aware of). I browsed the setting but cannot confirm if its syncing anywhere.

Installer does not allow for shortcut changes or more than one

I have been trying to create a shortcut for the Start Menu and the Desktop. I can create the two shortcuts except they are exactly setup the same. I try to change one or the other and they both revert back to the original settings. In the attached images you will see that I change the subdirectory to nothing. When I come back to the shortcuts area, the subdirectory is back. If I create a second shortcut, it is the same as the first... I cannot change it.
photo 1: this is how it starts, default
photo 2: My changes... subdirectory is removed
photo 3: I leave the shortcuts area
photo 4: I return to the shortcuts area and the subdirectory is back.
If I create another shortcut, it will act exactly the same. Both shortcuts will be setup as the first photo. No changes stay.
What is going on here?
Attachments:
shortcuts_setup_anomaly.zip ‏161 KB

What LabVIEW version is this?
LabVIEW Champion . Do more with less code and in less time .

MDX OLAP Universe does not allow for a Top 10 rank on measure.

Hello!
I am trying to Rank a measure by Top 10 in count on a MDX OLAP universe based on Web Intelligence. The rank works, however for all the zeros in the row values it gives the same rank and keeps on appending. I then tried to rank a measure with the MDX syntax in the SELECT statement of the measure itself. The syntax is as below:
<EXPRESSION>Rank([0MATERIAL__0MATL_GROUP].[LEVEL01].CurrentMember,
Order([0MATERIAL__0MATL_GROUP].[LEVEL01].CurrentMember.Level.Members
@Select(Exp Dem (Published)\Exp Dem (Published)),
@Prompt(u2018Top orBottomu2019,u2019Nu2019,{u2018DESCu2019,u2019ASCu2019},mono,constrained) ) )</EXPRESSION>
The XML is parsed because of the tags, however when using this measure in the query panel gives an error message for the prompt. Is there a way to rank a measure by Top 10 in the MDX statement above instead of the prompt for the Top/Bottom. I found the syntax in the OLAP Best practices guide.
Kindly revert for any possible solution. Any inputs are highly appreciated.
Thanks in advance!
Regards,
Vivek.
P.S.: I am specifically looking to Rank multiple measures by Top 10 count without displaying zeros / repetetive values.

Hi Ingo!
Thank you for responding! I have gone through the OLAP Universe best practices as suggested by the guide. However, the Ranking has an offset of repeating the ranks for same value metrics. So if I need a Top 10 and there are 3 zero values in the column, the ranking extends to Top 13. is there any way to hardcode this as a predefined filter in the Universe on the measure, which states that the rank stays limited to Top 10 irrespective of repeating values?
Kindly suggest if there is a work around for this!
Thanks in advance!
Regards,
Vivek.

My Iphone 4 will not let me send an email or reply to an email. The message states it has put it in my outbox and it is rejected by the server because it does not allow relaying??? I can't seem to find an answer to fix this. Any help?

My Iphone 4 will not let me send an email or reply to an email. The message states that it has put my email in my outbox and that my server does not allow for relaying. Can anyone help with this? I have read some other answers and nothing has worked Thanks

Your email provider has blocked the standard mail port 25 for sending emails and is requiring a different port. This is to avoid mail relays that use mail clients to send spam. You need to find the port that is used by your provider for sending outgoing mail. Then change the settings in your email account on your phone to match the port. You will also have to provide some security credentials for the account.
You can also try deleting the email account from your iphone, and the adding the email account back as this will many times set the correct port for sending emails.
You could also do a Google search on the the settings for your device with your email provider. That will provide you with the proper settings.

TS1347 Calendar does not allow for setting up appointments

Similar Messages

Maybe you are looking for