TS1347 Dear apple, The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT, Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones . So will you please facilita

Dear apple,
The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT,
Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones .
So will you please facilitate us on this matter.
Regards

Give apple feedback regarding this.
For a temporary fix, change your region? Get a 3rd party Calendar app that fits your needs?
I assume your current region is set in the photo?
If so, pick a region that has a start day of Sunday. (either historically or known for the present)
Note, with changing your region, it will change the default phone number prefix/country code for new contacts and addresses. (calling and SMS is not affected)

Similar Messages

Something happened to my phone and lost all contacts.I did not know this and backed up my phone.When i tried to restore back up the contacts were still not there.How to access older back up?

Something happened to my phone and lost all contacts.I did not know this and backed up my phone.When i tried to restore back up the contacts were still not there.How to access older back up?

Her contacts would be wherever she put them
The iphone is designed to be synced to your computer or cloud service regularly. If she failed to do this, then they are likely gone.

Twin upgrade and Unicode conversion: UMG_TWIN_PROCESS_LOGS Could not adjust

Hello,
We have done Upgrade of 4.5B MDMP system to ECC6 EHP4 MDMP and currently Unicode conversion in progress.
We adopted TU&UC. Now we are importing twin spumg results of last run to our procution copy system.
During running UMG_TWIN_PROCESS_LOGs. we are facing some errors
INDX lines to be corrected:               4.417
INDX lines corrected      :               4.144
IN that Could not adjust:        SMODISRC, we are referring Note 991654 - UMG_TWIN_PROCESS_LOGS shows errors on SMODISRC.
please suggest for other error tables below
Could not adjust:        VARI 1160
Could not adjust:        MONI
Could not adjust:        BDLDATCOL 1160 DLR000000492TSK0020305440PV1     0000000000DIFF    BDL   000614a01822pr                        000000Field List          S1100
Please suggest what action can be taken
Regards
Vinay

Hi Vinay,
did you already check attachment of SAP note 765475 - "Unicode conversion Troubleshooting guide" ?
Excerpt:
...check if the entries in
<table name> still exist. In some cases those entries only exist in the
Twin System but no longer in the Production System. In such cases the
message is not an error message but only information.
Best regards,
Nils Buerckel
SAP AG

HT201272 oading in i tunes but i could not found this tutorials.I have purchased v ray basic Lighting Order ID: MHT9244F3D and downl

I have purchased v ray basic Lighting Order ID: MHT9244F3D and downloading in i tunes but i could not found this tutorials.Pls be help.

What device have you installed it onto ? If I'm looking at the correct app then it should be compatible with iPads, iPhones and iPod Touches that are running iOS 6+ . Do the tutorial not show then show up in the app after you've installed it ?

Users could not open Public Folders in Outlook 2007 SP3.

Is anybody had this issue or probably know how to fix it?
We have Exchange 2013 server and users workstations with XP SP3 and Office 2007 SP3 installed. Exchange has users’ mailboxes and public folders. Public folders work OK until last week. Issue probably happened after latest CU update for Exchange 2013 installation.
Now users could not open Public Folders in their Outlook. The error is:
"Cannot expand the folder. Your profile is not configured. (/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=[email protected])"
And this "[email protected]" is public folder ContentMailboxGuid.
And this error message appears when user click on Public Folders \All Public Folders in Outlook. So company public folders do not even appear in All Public Folders folder. Users have Owner permissions for all Public Folders and Root Public folders.
Also one more error in Outlook about it:
“Cannot display the folder. Microsoft Office Outlook cannot access the specified folder location.”
One more issue is that previous Exchange 2007 server died (RAID died) so we had to delete it from AD and clean its records in ADSIEdit (CN=configuration,DC=.domainname,DC=.COM > CN=Services > CN=Microsoft Exchange > CN=Organization > CN= Administrative
Groups > CN=(Groupname) > CN=Servers >) and install new server with Exchange 2013, and import all users mailboxes from backup. Public folders were not migrated from the old server because of its death. We create new public folders in Exchange and
then manually import all folders from latest .pst backup using user Outlook.
And it work OK more than a month till last week.
Thanks,
Andrey

Hi Mavis,
Thank you for your answer.
I check permissions couple of times for both public folder and its root and both are granted for users as “Owner” and applied to public folder and its subfolders.
This server has 2 mailbox stores and both are currently mounted.
[PS] C:\Windows\system32>Get-MailboxDatabase -Status |fl name,mounted
Name    : Mailbox Database 2104233799
Mounted : True
Name    : MBDB1
Mounted : True
But when I check homeMDB property for Microsoft System Attendant in ADSIEdit I found that it is empty.
And it looks like System Attendant mailbox & service have been removed from Exchange 2013.
http://howexchangeworks.com/2013/05/cannot-open-microsoft-system-attendant-mailbox-error-during-exchange-2013-mailbox-move.html
and even from Exchange 2010.
http://blogs.msdn.com/b/dvespa/archive/2009/10/06/say-so-long-to-the-system-attendant-mailbox.aspx
Also I check arbitration mailboxes and all are looks to be in default database “Mailbox Database 2104233799” which is currently mounted.
[PS] C:\Windows\system32>Get-Mailbox -Arbitration |fl name,data*
Name     : FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042
Database : Mailbox Database 2104233799
Name     : SystemMailbox{1f05a927-77cc-4f5d-b5ca-667ea4256ff9}
Database : Mailbox Database 2104233799
Name     : SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}
Database : Mailbox Database 2104233799
Name     : SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}
Database : Mailbox Database 2104233799
Name     : Migration.8f3e7716-2011-43e4-96b1-aba62d229136
Database : Mailbox Database 2104233799
Thanks,
Andrey

Hello Apple I work in one of the shops phones in the Kingdom western Saudi Arabia you now restore a backup to the customer by mistake recovered to copy another client now been linked to the phone and ask me to check, I do not know PIN number

Hello Apple I work in one of the shops phones in the Kingdom western Saudi Arabia you now restore a backup to the customer by mistake recovered to copy another client now been linked to the phone and ask me to check, I do not know PIN number
<Edited by Host>

These are user forums. You are not speaking to Apple here. I'm sorry but we cannot assist you. Contact your Apple vendor in your country. Customer Service: Contacting Apple for support and service - this includes international calling numbers.

Why is not enabled on the Kingdom of Saudi Arabia FaceTime Why banned?

Hello
Why is not enabled on the Kingdom of Saudi Arabia FaceTime Why banned?
I have purchased a product (iPhone) (4) and surprised the deletion of this property is important!
There is no equality between us and you, Britain, Canada and some European countries?
I pay this amount to $ 750 enjoy the full features found with this product and finally blocked some features, such as FaceTime?
We will be happy if the service was activated FaceTime in Saudi Arabia
thanks a lot

Because your government doesn't want citizens making free calls over WiFi. Complain to them, as they are the one's who requested FaceTime be removed.

Is there a way to remove my facebook contacts from my phone contacts list? I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out throu

Is there a way to remove my facebook contacts from my phone contacts list? I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out through the settings feature or anything else....HELP please as it is annoying to see all of these contacts!

Hello ymprice91277, let's solve this mystery! To unlink the Facebook contacts go to Settings, Facebook, turn off contacts.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

HT4293 I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.

I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.

Have you plugged the USB cable into the computer also as the brightness is controlled over USB. If this does not work, you would need the Apple Display Driver for the version of Windows that you are using. The display driver is part of BootCamp software that you may be able to find online

HT5163 I brought both an iPhone 5 and 3Gs from the US to Saudi Arabia. I want to keep my iPhone 5 on the US conrtact but want to convert my iPhone 3Gs to a local phone. Is it a simple matter of changing out the SIM card?

I brought both an iPhone 5 and 3Gs from the US to Saudi Arabia. I want to keep the iPhone 5 under a contract in the US. However, I want to use my iPhone 3Gs as a local phone. Is it as simple as changing the SIM card in the 3Gs to use as a local phone. Will I be able to receive emails on the 3Gs with a local SIM card?

Check this article about how to get your phone unlocked, not every provider offers unlocking.
iPhone: About unlocking

IPhone 5 will not connect to brand new MBA/iTunes. Error message is "iTunes could not connect to this iPhone. Could not connect to the device."

Hi!
I've had my iPhone 5 for just over a year now, and I haven't really had any problems since iOS7 was installed. I had a PC, with no connectivity problems between any of my Apple devices. Then FINALLY, I purchased my very first Macbook Air 13". I set it all up, updated all the apps, and made sure it was good to go. My iPhone was really low on battery one day, and I just happened to have my USB for it handy and thought I would just plug it into my computer to charge it. I figured I worry about syncing it later as I hadn't really had time to set it all up with iTunes on the new computer.
MY PHONE WENT CRAZY. It just started vibrating all over the table. Looking at the battery icon, it was flipping between charging and not charging, and occasionally the "do you trust this device" window would pop up on the screen, but it was still going crazy. iTunes opened up and these alerts saying "iTunes could not connect to this iPhone. Could not connect to the device." and "iTunes could not connect to this iPhone. This device is no longer connected." All it was doing at this point was using up even more battery. But then the iPhoto app opened by itself on my shiny new Macbook and the vibrating stopped. It was charging and syncing! But not having iPhotos before on a computer weirded me out i hadn't decided exactly what I wanted to do with it, I closed the app. The phone went nuts again. ***. On a different day, I was trying to sync it again, and it worked. But only long enough to back it up on the macbook. W.T.F.
Plugging into any PC is no problem at all. The phone just connects and starts charging.
I've tried just about everything. All of my software is up to date, both on the mac and iphone. The USB cord is fine. I've reset the macbook with it plugged in and not plugged in. I have uninstalled, and reinstalled iTunes with the phone plugged in and not plugged in. I've reset all the contents and settings on my iPhone, as well as did a hard reset with it plugged in and not plugged in. My iPad has no problem connecting and it also has iOS7. It's just so weird though, that it starts connecting/disconnecting interchangeably as soon as I plug it into the computer, even when all my apps are closed. All this is leading me to believe that it must be some sort of issue between the devices' communication to each other. But I'm not sure if it's an iPhone, MacBook, or iTunes issue!
HHHHEEEEELLLLLLPPPPP!!!!!

I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.

After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

Thank you ProjectVRD. But this has not soloved the problem. It still shows no service even with my sim card well inserted. Even tried using sim card of another service provider thinking the problem could be from the service provider, it wasnt working still. PLEASE APPLE HELP ME.................

Safari could not open this page because the server stopped responding

Since upgrading to 4.2 I get this message a lot even though the page loads anyway:
"safari could not open this page because the server stopped responding"

Have you Checked your firewall setting(of both windows and of the Anti Virus).
I was Having the same Problem, and tried everything from the Internet, then i realised that firewall can mess things up and so i immediately TURNED OFF the firewall and restarted my Network and my Ipod ....THE INTERNET WORKED
i am using win vista and McAfee.
want to add few more things:
1> adjusting brightness has nothing to do with Networking.
2> Multiplayer/online games also get into problem due to antivirus firewall(AVG anitvirus specially.....Disabling firewall or setting it to permit the Device/program to access Internet WORKS)
3>to know if the problem is with the Idevice or with the System, try connecting other devices to that netwrk, if non of them connect then its the problem with the System/Network/OS and not with the Device........Resetting you Idevice again and again will not Solve the problem.
Happy Idevicing

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I keep getting the error: "lightroom could not import this catalog because of an unknown error" when trying to import from a catalog?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
I then tried exporting the needed photos to a new Catalog and that worked. But then when I try to import them again from my Master *+ Catalog I get the same error again!!
I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

This is a duplicate thread - see here

TS1347 Dear apple, The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT, Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones . So will you please facilita

Similar Messages

Maybe you are looking for