TS1362 No audio in iTunes movies but audio in iTunes music

I continue to be baffled and exasperated by this issue. Keep in mind that I am not a paticularly knowledgable computer whiz and have made attempts that have eliminated all audio, as in this morning, then wound up with audio back on iTunes music library without realizing how.
I do note that when opening the Quick Time player by itself and opening the window tab then clicking on "Show A/V  Controls" a window opens with controls that are all set to the left which I presume is off and I can not reset them.
My computer is a Dell XPS 9000 with an I7; 12mg RAM, Windows7, GTX460 video, Creative Sound Blaster xfi and the sound and video cards were recently installed by me in order to cure this problem and upgrade the system. Drivers were all updated and downloaded but I did not shut off any previous items because I think it is done automatically. Currently there is a creative 4 speaker system with a subwoofer connected to the card.

If it play video but not audio, normally is an audio codec trouble. Movies may using other codecs than your musics. Strang this happening when upgrading... You may try play the music with QuickTime, if still got no audio, than is the codec.

Similar Messages

  • Not authorized to play purchased movies but can play purchased music.

    I got a "This computer is not authorized to play (movie)" after downloading a movie from the iTunes store. I checked other movies and got the same message. BUT all purchase music plays just fine. I followed the recommended fixes: deauthorized the computer; removed all authorized accounts; removed the SC info folder. But I still get "This computer is not authorized to play (movie)" message just for the movies.
    iTunes 10.6.1
    Thanks!

    I still get a gray screen with no picture or sound for downloaded movies in iTunes 10.6.1 in Mac OSX 10.5.8 on a G4 1.67 MHz Powerbook. BUT if I boot the Powerbook in Mac OSX 10.4.11 and use iTunes 9.2.1, the movies work.
    After explaining the problem to a knowledgeable person, she suspects the "codec" has been changed in iTunes 10.6.1 so as to run  on Intel. Only suggestion she gave was to downgrade iTunes. Any suggestions to find iTunes 9?

  • I am trying to stream music from my iMac using iTunes music files to my Cocktail Audio X10 music streamer. I have allowed my files to be shared the X10 sees the files but when I try to accsess them it gives me the message files not mounted. Please help?

    I am trying to stream music from my iMac using iTunes music files to my Cocktail Audio X10 music streamer. I have allowed my files to be shared the X10 sees the files but when I try to accsess them it gives me the message files not mounted. Please help?

    No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.

  • HT1386 I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do.  It won't work.

    I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do.  It won't work.  I've tried more than several times to get help but nothing helps. Do I need to deauthorize the ipod or perhaps erase all the downloaded ipieta stuff and start over?
    Thanks for any suggestions

    Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
    Maybe it's time to buy yourself a new iPod Touch.

  • Can we use iTunes music API to our own website? But only want audio.

    Hi Everyone,
    Trying to integrate iTunes music API to our own website but just want only audio API to call. Please let me know steps to do this.
    Thanks in advance.

    Hi,
    Indexing all fields in a record is possible in BDB but is fairly expensive since an index record will be written for every field. If you have a relatively small data set then perhaps this is not a problem, but be sure to do performance testing.
    The common approach is to use a single secondary database (index) to create a many-many relationship. The key for this index will include the field name as well as the field value. This means that all fields can be indexed, including new fields that are added, using a single index and without changing code when new fields are stored.
    Indexes are created using Environment.openSecondaryDatabase. In the SecondaryConfig that you pass to this method:
      - Call setSortedDuplicates(true) since more than one record can have the same key.
      - Call setMultiKeyCreator(...) since the index will contain multiple keys for a single record.
    You implement the SecondaryMultiKeyCreator interface to extract the keys from your JSON record. This returns a set of keys, one for each field you want to index.
    The format of the index key can be anything you'd like (as you know BDB uses byte arrays for keys). For example, you could use a string of the form NAME:VALUE as the key, so that you could do your lookups using that format. To serialize a string as bytes, use a class in com.sleepycat.bind.tuple such as StringBinding.
    To do your lookups, pass your index key (NAME:VALUE) to SecondaryDatabase methods such as get().
    See the javadoc for SecondaryDatabase, SecondaryConfig, SecondaryMultiKeyCreator. An example is in examples/je/ToManyExample.java.
    Would something like that work for you?
    --mark

  • I've created a movie but at the end there is an invisible audio clip that keeps playing. How can I select it and delete it?

    Hello everyone,
    This is Karie Garnier in British Columbia, Canada.
    I'm new to FCPX.
    I've created a 20 minute movie, but at the end of the movie, there is an invisible audio clip that keeps playing.
    How can a video clip be playing and making sounds, when it doesn't appear in the timeline? and ...
    How can I select this invisible audio clip and delete it?

    I think you could be right, that it's an old render file that's got stuck.
    By the time I finished this movie my 500 GB hard drive was 99.9% full and
    FCP started acting wierd, so I suspect you are right.
    I have since upgraded my hard drive to one 1000 GBs but when I play the movie the
    glitch remains.
    Can you please tell me:
       a) How can I fix the old render file so that it is no longer stuck?  ... and
       b) How do I take a screen shot of the timeline?

  • I imported a CD audio book into iTunes 11, searching says its there, but I cannot find it. It does appear in my iTunes music folder.

    Using Audiobook builder I imported an audiobook CD into iTunes 11. I can see it in my iTunes music folder on the hard drive, searching in iTunes 11 says its there, but in either the albums or list, it does not appear. I have successfully imported many CDs using Audiobook Builder before, but with this particulary book I have this problem.
    Any ideas anyone ?

    The missing file thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    At guess you've used a different profile name. Files inside the media folder have survied the transfer, but those outside are expected to be on the same absolute file paths, but no longer are.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
    tt2

  • I have on my iTunes movie folder about 200 movies, but on Apple TV sharing i can see only 120 movies. Is any limit , how many movies can share on Apple TV?

    iTunes sharing on Apple TV shows only 120 movies, but I have more than 200. Are any limit to show movies on Apple TV or something wrong with my sharing?

    Make sure they are all compatible
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • I have just put an audio book into my iTunes music library.  When I tried to transfer it to my iPod shuffle it rearranged the tracks so that they are in the wrong order.  How can I put them in the order they appear in the book?

    I have just put an audio book into my iTunes music library.  When I tried to transfer it to my iPod Shuffle it put the chapters in the wrong order i.e. Chap 1, Chap 10, Chap 11 etc. rather than Chap 1, Chap 2, Chap 3 ...  How can I get it to put them in the order they appear in the book?

    First, we need to know if the audiobook chapters are being treated by iTunes as music files or as audiobooks. If they are not audiobooks purchased from the iTunes store, they might be getting "shuffled". You will need to look at "File" - "Properties" (I think - I don't use iTunes under Windows - or right-click on the file and choose "properties") and look at the media type. If it is "Music", change it to "Audiobook". If this is not the problem, or does not fix anything, please post back.
    Actually, looking at your post again, a second thought occurs to me - assuming there are less than 100 chapters in the book, just renaming them with a leading zero on the first nine chapters might do it. A computer will alphabetically sort filenames in the order you quote (1, 10, 11, 12, 13, ... 2, 21, etc.) but a leading zero will fix that (01, 02, 03 ... 10, 11, 12)

  • 2nd Gen (Touch Wheel) won't play audio book from iTunes Music Store

    I have a 10GB Touch Wheel iPod (2nd Gen). Software version 1.5.
    I recently purchased the unabridged version of The DaVinci Code from the iTunes Music Store. The 7-part audio book plays just fine on my iBook and on my daughters' Nanos but it does not play on my older iPod.
    What happens when I choose the first part on my older iPod is that you can see it cycle through parts 1-7 without playing anything and then returns to the main menu.
    I don't have problems with other music or previously purchased audio books.
    Any thoughts or suggestions are appreciated.
    iBook G4   Mac OS X (10.4.6)  
    iBook G4   Mac OS X (10.4.6)  

    I figured it out on my own... somehow my device got switched to "shuffle" mode. I have no idea how that happened, but there you go. Since I never use it in that mode, it never occurred to me to check that. Sigh. I switched it back to 'play in order' mode and now it is just fine.

  • HT3819 I have movies but no TV shows on my shared iTunes

    I can see movies from all passwords used for my iTunes. My family members share one computer. The Share is my user ID. I can watch my movies but no TV shows apear on my iPad. Since I only have this set up to watch a specific TV show it is been kind of  frusterating.
    iTunes won't let me edit the metadata so I have been downloading the episodes from the cloud and deleting them. Silly since I can watch them on my computer in the other room that is connected by wifi. Perhaps Apple likes sending out extra data?

    That means it is not fully downloaded so you are streaming it. Fully download it.

  • I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

    I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

    HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

  • I've bought a movie but iTunes crashes while trying to download it. Do you experience the same today?

    I've bought a movie but iTunes crashes while trying to download it. Do you experience the same today?

    Can you not sync your iPod with iTunes? That should get the movie onto your computer. Now sync your iPad and transfer the movie?

  • HT1751 Hi I followed the istructions to copy/move iTunes music to a new PC, can see albums listed in Library, but SYNCH does not put any music on iPod. It took me three weeks to import my CDs into iTunes and i DON'T want to do it again! Can anyone help ?

    Hi I followed instructions to copy/move iTunes music to a new PC. I can see albums listed in the library but SYNCH will not put any music on my new iPod.
    It took three weeks to import my CDs on the old PC and I don't want to do it again!
    Can anyone help ?

    Take a look here; it should help:
    iTunes for Mac: How to copy purchases between authorized computers
    Though it refers to items purchased from the iTunes Store, it applies to all your iTunes content. And if you happen to also own an iPod:
    How to use your iPod to move your music to a new computer
    Once you have the tracks on some removable medium, you can mount that on your new computer and then just drag the content to the iTunes window. Make sure that the option to "copy files to iTunes Music folder when adding to library" is set in the iTunes -> Advanced -> General preferences before you do. Alternatively, you can use the Add To Library command and select each track (or folder of tracks).
    If you won't be using that Windows system once you move the content, don't forget to deauthorize the system from your iTunes Store account before you dispose of the computer.
    Regards.
    Message was edited by: Dave Sawyer

  • TS1453 Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

    Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

    Whinston,
    I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies?

Maybe you are looking for

  • While charging my ipod touch 4th gen for the first time i left the battery app open ,  and it was hot beyond limits .Is it abnormal?

    Please help me

  • Acrobat Reader 7.0.8 and new MBP

    In setting up my new MBP, I opted to not have the migration assistant bringover applications, just my home and network settings. I want to get universal binary versions of apps when available. I went to install adobe reader (acroread) from the Adobe

  • Help to make faster my VI

    Hello! I have a cluster array with 105500 clusters; in a cluster there are 3 2D array with the same size (10 rows and 8 columns). I want to merge the data to obtain a single 2D array with 10*105500 rows and 8*3 columns. I  know that with large array

  • BW360 Course Difference between BW 3.5 and BI 7.0

    I am looking for some training regarding the system performance and Process Chain, which should be well covered in the BW360. However, the course schedule at the moment is only for BI 7.0 and I was told by the SAP Education representative that it may

  • XQuery on XML DB

    I'm using the XQuery Java API (OJXQI) and I managed to combine the content of local XML file and relational table from database in the following way: FOR $a IN document ("bib.xml")/bib/book FOR $b IN sqlquery("select * from scott.emp")/ROW WHERE $b/S