TS1363 Audio Sync problem - Audio is late, after a scene people are talking and audio does not relates

All the TV shows purchased and downloaded have AUDIO SYNC problem. This does not happens with any other video I watch from other sites, i.e. ABC, NBC, Showtime, all which I watch with no audio problem.
The audio is always late, people are talking and scenes change and the audio belongs to the past! Please help me to solve this!

hi vcp
welcome to the forum, glad you made the switch ... you won't be sorry (although you might be wondering at the moment!)
1. nothing wring with that
2. no
3. just don't install 3rd party crap you don't need ... and don't install any anti-vrus software
4. no special settings required
what camera did you capture from? did you capture with FCP?
cheers
Andy

Similar Messages

Problem - I input a new event into my iPhone calendar and it does not update on my iMac or iPad. I have loaded the latest software on all devices and have switched over to iCloud. Suggestions?

Problem - I input a new event into my iPhone calendar and it does not update on my iMac or iPad calendars. I have loaded the latest software on all devices and have switched over to iCloud. Suggestions?

On the iMac open System Prerferences > iCloud
Deselect the box next to Calendars then reselect then restart the iMac.
On the iPad, tap Settings > iCloud
Switch Calendars off then back on then reset the iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
Hopefully the event synced over all the devices.

Problems with Labivew 2013 / 14 install - Ni Variable Engine error and Labview does not close, processes do not stop when I run Vis.

Hi All,
I am hoping at all my problems are relateded to a problem I am experancing, when I look into my windows 7 (64bit) event viewer near every time I boot up I get an error regarding the NI Variable Engine which reads.
The description for Event ID 0 from source NI Variable Engine cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
C:\Program Files (x86)\National Instruments\Shared\Tagger\ni_tagger_plugin_mxs.dll: Failure to load plugin: Unexpected Error: Unable to get the Interface from the plug-in.
and a second which is the same apart fomr the last line
Unable to load the MXS configuration plugIn: Failed to get MAX Configuration interface for Tagger: 0x80040318
I have tried uninstalling all labview things and I have tried repairing all labivew programs. Along with this I got this error when I installed Labview 2013 so I thougth why not try 2014 and I still get the same problems. I also shoudl point out I use bot 32 bit and 64 bit versions of labivew. I have installed labview on many machines before but never encountered this problem. That being said this was a new clean windows install.
Along with thiese errors labview heardly ever shuts down properly when I close the program it just freezes and needs forshed shut down.
Apart form this I noticed that when I run any of my Vis which I have never had problems with in the past and I stop the program somtiems processes keep using CPU such as "lktsrv.exe"
I really need to get this sorted out because its morstly the crushing and processes not stopping which is rather annoying.
I shoudl also say that these problems are both in the 32bit and 64 bit versions of labview not difference. and no difference if its 2013 or 2014
Cheers

Hi GajanS,
Thanks for your reply sorry I havetn noticed anybody had replied as I stopped hoping for any responce before then.
I have attached a screenshot of the four processes that seems to be giving me a problem.
I have actually managed to find the program causing labivew to crash was in fact my antivirus software which I have now removed and have no more problems with labview crashing on shutdown.
After removing it I tried the repair feature again for all my labview programs but sadly the one persistant problem remaining is still the four processes using around 13% processor each. I have found out this happens sometime after booting up regardless of if I run labivew or not. So it does not directly seem related to the running of any labview applications but rather a bug in the labview software.
the processes are:
lktsrv.exe
tagsrv.exe
nidmsrv.exe
lkads.exe
as shown in the task manager.
I would relaly help if I can get this sorted out.
Cheers
Attachments:
Screenshot 2015-03-24 21.50.00.png ‏12 KB

When trying to load a backup on my 4th generation iPod touch, after all the prompts are done, my iPod does not reappear in iTunes. Please help!

What should I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Is there a way to sync my ical with my husbands if I have mobile me and he does not?

I'm hoping that when I make an entry in my ical it will automatically be put onto his. Is this possible? I have a macbook and he has an ipad2, and we both have iphones - so I'm hoping it will sync with everything. Thank you!

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved:iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device

Hi, guys. I have some problems with my ipad. It has been switched off and it does nor respond on any actions

hi, guys. I have some problems with my ipad. It has been switched off and it does not respond on any my actions

Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Audio sync problem after scrubbing

I'm trying to piece together some clips from a TV series called Legend of the Seeker. I'm using Premiere CS4 4.0.1, Vista Ultimate 64-bit.
Placing the hour-long video in the Source Editor allows me to play the video fine from beginning to end, but if I start scrubbing through the file, the audio unsyncs itself immediately.
Here's a screenshot of the video in GSpot:
http://img14.imageshack.us/my.php?image=premieresync.jpg
Setting IN and OUT points and then dragging a very small clip into the timeline has the same result.
Any ideas would be very appreciated.

You are actually pretty lucky to just have Audio sync problems, though I do not know why scrubbing would make any difference. With both Xvid and DivX one more often gets no Audio, or no Video.
Agree 100% on the 3rd party conversion, prior to Import into PrPro.
Hunt

Major "BUG" in Imovie 9 - Audio Sync Problem on Export !

Well I'm a hard-core Apple user from day one, but unfortunately today I'm not to proud about the latest version of Imovie 9.
It seems there has been a "MAJOR audio sync problem on export" in Imovie 9, since July 2009. Apple knows about this bug for a long time now, but didn't release any bugfix yet!
Here's what it's all about:
It seems if you use the (custom /manual) speed-adjustments and not the preset slider speeds, you will experience (after exporting your movie) annoying bursts of audio from clips that had been set to mude. The strange thing is that you will only experience this audio-bug after exporting, you will NOT experience it in the project playback mode!
Here's what you can do:
Find ALL the clips in your Project that are Speed Adjusted.
Instead of using a "Custom Speed" percentage, use any of the "Preset Speeds"
Preset Speeds on the Slider = 12.5%, 25%, 50%, 100%, 200%, 400%, 800%
Then, export your project as usual.
No more sync issues.
Really hope That Apple will come up with a real BUGFIX soon.
It's a shame that a major bug in a otherwise GREAT PRODUCT, hasen't been fixed yet!
What's wrong with Apple?...this is not one of their finest hours.
Still A BIG fan from Imovie HD,...I'll chance to Imovie 9 when the bugs are finaly fixed!

This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

CS4 audio sync problems

Hi all,
sorry if this question is old hat - I've searched the forums and can't seem to get a clear answer (most refer to CS3 and before) so thought I'd ask anew.
My preview in Premiere CS4 is fine, as is the preview in Encore CS4. The video was captured from four tapes (HD as mpeg and SD as Matrox AVI) in Premiere. The final DVD (10 minutes) consists of 21 clips. All but one are OK - this one has the voices well out of sync with the video, even though other clips taken from the same tape are fine.
I also had a major problem recently with an MP4 from youtube, which I guess is the same issue - everything else was fine, but this one clip was well out.
I'm guessing by now this is an old problem. What's the solution, please?
Thanks
Paul.

Newbie to Adobe here ...
Okay, so after spending over 14 hours trying to fix the audio sync problem I fixed mine. After editing my project I selected Sequence > Sequence Settings > Playback Settings > under Realtime Playback make sure the "Desktop Video Display During Playback" box is selected. Next, in "External Device" change the setting from "None" to your next option. Mine reads DV: 29.97 720 X 480i. Next, Under "Export" section in that same window select the in "External Device" select the DV option again. Also, you might want to "Disable video output when in background" ...select that box at the bottom of the screen.
Now, try recording the video to the tape ....my audio now sync's as normal. I hope it works for you.\
One more thing ... you can keep the "Desktop Audio" button selected.

FCP: AUDIO SYNC PROBLEM

i have audio sync problem -- of the finished product which didn't have that problem before. does anyone know how this could have happened? in my earlier posting, there was a warning window which i played around w/ and now i have an audio sync problem in my prior projects.
please help me.

The Reels, are indeed the 5 surround channels. I have a feature that is broken up into 8-10 minute sections. I did this because the composer was using a G3 at the time and couldn't handle the whole movie at once. They are 16bit 48khz aif files exported from ProTools. The biggest thing here, is that at one point everything was in sync. I am trashing the preference files now to see how that works.
It's not a playback issue as well. When i scrub one frame at a time, the sync has drifted off later in the clip. It's very strange.
In my previous post I said the one of the Reels was in sync. That was because I recreated it, by making a new project and copying the video from the timeline, and re-importing the 5 audio streams. It didn't work for any other reels though. it is still out of sync in the main project.
Trashing prefs did not work.
Also, I tried a lot of the things in that technical doc, but non of them worked including trashing prefs.
The real weird part is that the Audio file SAYS it is the same length of the video, but the audio ends later. It's in sync in the beginning but not at the end.

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

Audio sync problem with videos imported from iPod Touch

I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

Premiere removes black footage on import causing audio sync problems.

Hello,
Strange problem at the moment. I've exported DSLR footage and audio from Premiere as H.264 - works fine - its my usual export and one I'm allways happy with for most uses. No sync problems, but some black footage (or blank footage).
When I import this into Premiere again, the black footage seems to be removed and thus the audio is completely out of sync. Any thoughts?

I'm inclined to say observer/operator error here. I don't believe it's possible for PP to do as you claim, so I'm skeptical of your conclusion.

Premiere CS4 - Audio sync problems, Encoding Problems

Hi,
I've been using Premiere CS3 for encoding 20-25 minute videos to deploy on a Flash Media Streaming server.
Today I upgraded to CS4 and everything that I render to FLV/FV4, H264 or Quicktime format has serious audio sync problems when I use AAC as the audio codec. Unfortunately for me, AAC is the codec that I need to use for the streaming server. The audio is synchronized to begin with, but it gets progressively unsynched as the video progresses.
Has anyone else had this problem? I'm using bitrates of 256 kbps, 512kbps for the video and 24 kbps / 32 kbps for the audio.
Another thing that I've noticed is that many of the options that I used when encoding videos are no longer available!! For instance, I cannot generate hinting tracks for Quicktime, and most of the audio frequencies are gone for Quicktime as well.
What a disappointment:(
-Chris

Seems to be an on going issue with no response from Adobe. Have the same issue with the audio running ahead of the video. (Cool if this was an old Japanese monster video).
Running CS4 PP & AME all updates are current. Nvida Quardro CX (current drivers 4.20.006) used several formats (Elemental h.264 to MPEG-2) same issue.
PC Intel Xeon CPU 3.20GHz 16GB RAM – Prof Win XP x64 Ser Pack 2
Any help from Adobe would be appreciated.

Audio sync problem downloading VHS-C

I've downloaded a straight VHS tape (with no audio sync problems) into final cut pro once I had changed the Camera setting to 32Khz and the capture and sequeence presets to 32khz as well (it was all aout of sync when the settings were 48Khz).
The problem now, which is driving me MAD, is I have 13 hours of VHS-C tapes, which I have put into a VHS cassette converter to download and the audio is out of sync. The capture presets are the same as above (i.e. 32KHZ) . Why is this? I downloaded them initially at 48Khz (settings on the camera 48Khz and FCP at 48Khz in capture and sequence settings), but this was also out of sync.
Why is it different from one VHS tape to a VHS-C tape?
I hope there is a God out there that can help with this one?
Thanks!

Eagleray:
I capture through a ADVC-100.
I use to find the same problem playing VHS tapes with a standard VHS player from time to time and never solved it. The out of sync audio appears when capturing some specific tapes from specific sources:
- All my home tapes recorded in my old VHS recorder shows a audio problem; not specifically out of sync, but some audio "cracks" from time to time, like an electronic noise. No way to find a capture setings that works.
- Some customers VHS tapes that showed the out of sync (no noises) and again, no combination of digitalizer settings made it works. Had to resync the audio editing and stretching in an external audio editor or cutting shorts parts and syncing them with video. The our of sync appears in small captured portions, like 10 min or so.
- Never found a sync or audio problem capturing from VHC-C (the small VHS tapes) playing them with the tape adapter in the player.
I google long hours about this problems and all that I learned is that some old VHS recorders had not a "synchro" signal in the tape.
As I told you, I don't use any pro VHS deck, just my consumer "state of the art" VHS home recorder.
I hope there is a God out there that can help with this one?
I don't think HE visit these forums.

TS1363 Audio Sync problem - Audio is late, after a scene people are talking and audio does not relates

Similar Messages

Maybe you are looking for