TS1363 I have an ipod shuffle, 7yrs old. Says I have an error and to re-install. Then it tells me, this file cannot be read because it was created by a newer version of itunes. I cannot find any newer version and don't recall downloading it anyway.
Told to re-install itunes. When I do, it tells me "This file cannot be read because it was created by a newer version of itunes." Therefore I can't re-install! Can't seem to find a way to get itunes back. This is a 8 yr old ipod shuffle...
The latest version of iTunes can be downloaded here
http://www.apple.com/itunes/
As long as your computer supports it, the latest iTunes will work with all shuffle models, back the first one.
Just one thing. The latest iTunes hides the sidebar, which can be confusing for long-time users. To show the sidebar, from the menu bar, under Views, select Show Sidebar.
Similar Messages
-
I am unable to open my iTunes on my Toshiba laptop. I keep getting an error message of "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. I don't have the problem on my iPhone though.
Any help or suggestions will be greatly appreciated.
Thank youUnless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?
Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario -
Downloaded the newest version of itunes and now I can't access any of my library. It says The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Anybody know what to do?????
I got that Exact message... I think I updated my version of iTunes and it worked correctly.
Hope this helps... -
I have the message "iTunes Library cannot be read because it was created in a newer version
of iTunes. I have an old G4 Mac and cannot upgrade beyond Leopard. (OS 10.5.8)
What can I do? How and where is help?Somewhere in your process you ended up with an earlier version of iTunes than was used last with the library. iTunes 10.6.3 is the highest version that will run under OSX 10.5.8
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575
If you had an earlier version and still want that version I am not sure how to go about this. My iTunes library file does not say it was created with a particular version, although I admit I have not looked at the .xml copy to see if it is buried in the file itself. Apple only has a very limited number of iTunes versions openly posted, though you can still find just about any version if you look in the right places. You would have to kind of start low and work your way up to where you want to be since once you open a library with a version it cannot be reverted to an earlier version (make backups first). -
I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
Any advice would be helpfulHello Davedamoclese,
Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
http://support.apple.com/kb/HT1923
Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
http://support.apple.com/kb/ht1391
You can download the latest version of iTunes from the below link :
http://www.apple.com/itunes/download/ -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I cannot bring up iTunes as it keeps saying, "the files 'itunes library.itl' cannot be read because it was created by a newer version of iTunes". I have reinstalled itunes, and still no luck. HELP!!!!
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Recently I have not been able to open iTunes,I tried removing and reinstalling it but still won't open. I now get the message The file "iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Any suggestions on how to get iTunes to work again ?
Thanks
<Edited by Host>Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I had to uninstall iTunes because when I connected my ipod and was in that file and clicked on music to add songs that file was empty. Once I downloaded iTunes again a box appeared that said The file iTunes Library.itl cannot be read because it was created by a newer version of itunes..............so then I unistalled iTunes and downloaded again 4 different times and got the same message each time. I am using a laptop Windows Vista 64 bit system...please help
I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575 -
Can anyone help me with this problem. I tried updating the latest itunes and it caused an error MSVCR80.dll missing. I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that. I did that but now get the error "the files "itunes library.itl" cannot be read because it was created with a newer version of itunes. I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions. Can anyone please go through step by step (letting me know where I can find what is needed) to enable me to be able tio log into itues again. Thanks
Hi pussygalore,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
Regards,
- Brenden -
Hi all, please help me reinstall Itunes onto my PC. When i did a pc refresh, it deleted my itunes and microsoft office. I am now trying to reinstall itunes and am getting the following message each time i try run the new downloaded version ( i have tried a few older and the latest one and all show the same message)
the file Itunes cannot be read because it was created by a newer version of itunes. I have downloaded the latest version
Cheers
AndrewTell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first. -
Has anyone had any luck getting ITunes to work properly on a Windows 7 PC lately? Up until today, I could not open my ITunes at all because it said the disk was locked. A very helpful person at Apple Care told me to go into properties and release the read only box. I did and it did not help. So I uninstalled ITunes and downloaded the newest version. Now I get the message: ITunes Library.itl cannot be read because it was created by a newer version of ITunes.
Can anyone help me out with this? Thanks.See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I have just clicked on my iTunes desktop icon and got the following message "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Why has this occurred when it working fine? Is it best to update iTunes to 10.2 to attempt to resolve? Initially I got the prompt Quicktime was out of date so I updated that successfully in all programs. I do not want to lose my iTunes library.
Sorted problem updated and reinsatlled and restarted computer.
-
I keep on getting the following message:
the file itunes library.itl cannot be read because it was created by a newer version of itunes
This is occurring on a Toshiba laptop running Windows 7. It appears no one has ever encounted this problem using a Windows 7 system judging by the lack of threads devoted to discussing this issue. Is this the end of the road for my participation in the Apple world, or is there a possible fix for this problem?
I run iTunes on my computer, on my iPad 2, and on my iPhone 4S.
Sincerely,
Ralph W.Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2
Maybe you are looking for
-
Is there a way to suspend execution within LabView?
Hi all, My demand is to suspend the running application when I want, and resume it after that, within LabView. I heard about using TestStand maybe can do it. The tested product sometimes goes wrong during production test. At this time, I want test pr
-
Hi, We have the complex pricing conditions developed in R/3 and those have been moved to CRM and from there ISA takes the conditions. The problem is, when the pricing conditions transferred from R/3 to CRM, some of the conditions have not been transf
-
Progress bar stuck while installing Mavericks in recovery
Hello I erased the harddrive via Disk Utility in recovery and now i'm trying to reinstall OS X Mavericks. The problem is that the progress bar is stuck. It says "Downloading additional components. Your computer will restart automatically" yet there h
-
After update performance issue with certain PCs
Over the past 2 months there was an update to the Forefront Client that caused a strange issue on some of our machines. Basically when we update device drivers MsMpEng.exe goes nuts and uses at least 50% to 98% of the CPU for the entire duration of
-
Critical error when running BEX
Hi, My students are getting a critical error when running BEX analyser (excel shuts down). I understand there is a patch for BEX .... where can I find it? Thanks, Ed