TS1363 I'm trying to sync my ipod nano to my recently restored hard drive. At one point while i was getting it all loaded again I did connect my device but told it not to sync as my library wasnt complete, now it wont give me that option anymore. How do i
While trying to rebuild my library after loosing my harddrive, I conneced my ipod nano 3rd Gen. to charge and when prompted if I wanted to sync (warning I would be replacing the library) I didnt accept as I only had a few songs replaced. Now I finally have my library rebuilt andI cant get it to sync. In windows It only shows as "Photo Stream."
Restore the iPod to factory settings in iTunes to associate the Nano with your new iTunes library.
Restoring iPod to factory settings
B-rock
Similar Messages
-
I recently aquired a new iphone 4s because my old one broke. I backed it up on my itunes but now it wont give me the option of using the phone, it just says connect to itunes. I have synced it several times now and dont know what to do, please help me!!
I recently created a new apple ID
Bad idea.
Content bought with an Apple ID is forever associated with that Apple ID. Apple will not transfer content from one Apple ID to another and Apple will not merge Apple IDs. Unless you are prepared to forfeit all the previously purchased content and buy it all again with the new Apple ID, you will need to maintain the old ID to update and redownload your content. -
How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!
Hi, did you try iTunes>File>Import?
-
When trying to do a system backup to my remote LaCie hard drive, what does it mean when I get a message that says "waiting for volume LaCie disk"? While this message apears no back-up occurs. Is there a setting I need to change?
You can't do a backup of icloud to an external drive. In fact, does your post have anything to do with icloud (you're in the icloud forum)?
What kind of "system backup" are you doing? Are you using Time Machine? -
After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
My ipod touch is now disabled after entering the wrong passcode too many times. t says "connect to itunes" but itunes will not recognize the ipod because it is disabled. How do I enable it again? Thanks!
iOS: Unable to update or restore
-
Ok. so I updated to iOS 5. Downloaded it from iTunes and all. But in the middle of installing the iOS, i fell asleep. not knowing my computer was at a low battery charge my computer shut down. I did a DFU already and it worked but i'm not sure if it the os is complete. Is It??
Restore to factory settings. That will use the latest iOS and then restore from a backup.
Never, never, never attempt an update/upgrade on any portable computer device without plugging it into its AC charger. -
Can't download music purchases after hard drive replace. itunes doesn't recognize my ipod? computer is authorized and ipod up to date
First get iTunes to see the iPod
iOS: Device not recognized in iTunes for Windows
Then
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I have an iphone and it is obviously registered to my itunes so i have all my apps and music on it and my sister just got the new ipod touch and wants my apps and music and so i went to register it to my itunes to sync my music and apps to it just before her birthday but itunes crashed on one of the stages (the final stage i think) of registartion and so i had to close itunes and start it up again but it didnt give me the steps to register the ipod again and now when i connect it i go onto the ipod button and it is just blank with ipod written in the middle with no autofill buttons or sync buttons or any automatic fills and i cant drag music onto it either. Is there anything i can do?
- You need to restore the iPod to factory defaults/new iPod and start anew. Is the restore button visable in iTunes? If it is they restore the iPod.
- If it is not visible try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If the restore button is still not visable, try placing the iPod in recovry mode. See:
iPhone and iPod touch: Unable to update or restore -
My friend linked my i pod to his apple id and downloaded songs to mine. now i cant downlad aps because he won't give me the password for his apple id. does any one know how to fix this?
Go to settings>Store and sign out and sign into your account.
-
I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?
Are you using the Adjust Date and Time option or the Batch Change option? If it's the former try the latter. If you get the same results launch iPhoto with the Option key held down and create a new, test library. Import the same video file and check to see if the same problem persists.
OT -
I found an iphone 4 and i reset it everything went good. It told me to connect to itunes so i did (via windows 8) but it could not recognize it. Please help
I hope if I ever lose my phone that you find it snozdop and not ajackson15. Maybe ajackson15 will lose something of his/hers and then not get it back
-
I am trying to sync an ipod touch 4TH gen. The capacity bar at the bottom shows I am adding 22.29g with 6.5 g free. Yet every time I try to sync it warns that there is not enough room an additional 868.9m is still needed. Does the capacity bar tend to be wrong or am I missing something?
Well when all else fails do a restore! This fixed my problem. Still don't know why the content bar differed, but what the hey!
-
Trying to sync my iPod nano (6Gb) for the first time to my laptop (Windows 7). When I toggle the "iPod sync" button I do not get the "apply" button to start the sync. Why?
I have a 27" iMac with the latest version of iTunes. I tried restoring my iPod and even removing and re-installing iTunes. What eventually worked for me was plugging into my PC and restoring/reformatting it to work with my PC. I don't know why it wouldn't work with my iMac, but now it seems to be working.
-
i am trying to sync my ipod nano 7th gen with my music on the cloud, via a desktop PC.
I have successfully done this in the past.
now I am getting a series of messages: "not enough access privileges"
have reset the nano and also downloaded latest iTunes software.
Any suggestions?Hi,
I'm having a very similar problem, so I was excited to see the link above. But when I click on it, it redirects me to the nike.com main website (I'm assuming Nike redid their website since the above link was posted). Could you please point me to that article somewhere else or tell me how you fixed your problem?
My exact problem is this: I was running until recently with my iPod Nano 6th gen and the Nike+ sensor kit (sensor that goes in the Nike+ shoe plus receiver that goes in the iPod Nano). When I would sync my Nano with iTunes (I would have the "Automatically send workout data to nikeplus.com" option checked), all was well with this set-up as far as syncing my stuff to the Nike+ website goes.
I recently realized that for the iPod Nano 6th generation, the sensor/receiver combo is not required anymore. So I ran two runs without the receiver. I kept the sensor in the shoe though as nowadays I mostly run with my recently purchased Nike+ Sport GPS watch and I like to have the sensor in the shoe in case the GPS signal gets lost at some point during a run. Anyway, those two runs that I ran without the receiver won't sync to my nikeplus account. I can see them in my iPod Nano's history and I can see one of them (the latest one) on the Nike + iPod tab of iTunes when I sync my Nano. The difference though is that on iTunes this latest run appears under a "Sensor 1" selection, whereas all my previous runs with both the sensor and receiver would be under "Nike + Sensor" selection. Within the "Nike + Sensor" selection, under nikeplus.com, there's the "Automatically send workout data to nikeplus.com" option and below it a Login ID that shows my Nike+ website log-in info. Within the "Sensor 1" selection, the Login ID is missing. I've tried renaming "Sensor 1" to something else but it didn't make the Login ID appear.
Thank you for reading this and any help would be greatly appreciated.
Best,
Dimitris.
Maybe you are looking for
-
Hi, I have a problem with processing inbound IDocs from an external payroll system to infotype 0008. The process is quite simple; salary changes from the payroll system is recorded to the corresponding employee's infotype 0008. When testing I notic
-
Purchased this Epson Stylus CX 4200 along with my iMac. I set it up, plugged it in and I know the printer works as a copier because I tested it. However, my computer and printer do not seem to be communicating with each other because I get a message
-
Hi All, Using following 2 documents I had tried to configure TREX to search HLTM tags. After following all the steps when I tired to search I don't get any results. 1) How to set up web repository and crawling it for indexing.pdf 2) How-to-guide for
-
User-Specific Safari Crash Problem
Safari is crashing upon opening - hangs with the spinning ball and then closes. I did open a new user account and it works ok. I have trashed several of the plist files, all to no avail. I would like to keep all of my bookmarks, etc., so I would like
-
Elements 13 won't open from iphoto
Elements 13 won't open from iphoto. I have gone in Preferences/Advanced/ and changed the Edit photos to Elements 13.