TS1363 im trying to restore my iphone and it got disconnected and wont reconnect to restore again, what do i do
im trying to restore my iphone and it got disconnected and wont reconnect to restore again, what do i do
Hi Troy,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting steps in our iPhone assistant helpful if your device isn't recognized by iTunes:
http://www.apple.com/support/iphone/assistant/itunes/
Best Regards,
Jeremy
Similar Messages
-
i am not able to get into my MacPro notebook. person set up passwords i do not know???? he certainly did not use any password I use
therefore i cannot do much of anything. I got Apple to call me but when she transferred me, call was lost and no one has called me back.
my case no. is 405403541.Did you purchase the Mac used? If so, the person should have erased the drive and reinstalled the original system and should have given you the install disks.
Good luck with your call to Apple. -
I'm trying to activate my iphone that i got used. i restored it to factory settings. I'm now trying to activate the phone and it says it was originallyh activated with someone else appleid. They aren't around nor do i have anyway of getting a hold of them. How do i activate the phone with my appleid?
If you cannot contact the previous owner, then the iPhone is unusuable. There is no way past the activation lock without the Apple ID and password used to set up the lock, or the previous owner removing the device from his/her iCloud account.
If you purchased the iPhone though a service such as eBay that offers buyer protection, contact that service and file a complaint and get your money back. If you purchased the iPhone privately, then you've wasted your money.
Regards. -
after restoring my iphone 4,it went o and i haveto restore it again,but this time,there are errors like,error 21.which i have trie fixing several times.what do i do,its so frustrating.
Hi ..
Help for error 21 > Resolve iOS update and restore errors -
Tried to upgrade my iPhone 4 to 5.1 and now it is stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?From iPhoneWiki:
Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Also put your iPhone in DFU mode when doing the above and restore. It's a software error. -
i restored my iphone 3gs to factory settings and now when i turn it on it says to connect it to itunes well i tried that and its not working then i tried to hold the power button for three seconds then the home button for ten seconds but still nothing please help asap
If iTunes doesn't recognize it, do this:
http://www.apple.com/support/ipad/assistant/itunes/ -
i brought an iphone 4 factory unlock and it is linked with an icloud id of previous owner, i dont even know id of icloud , 1 week ago i restore my iphone 4 n got stuck in activation screen, please help me out please?
If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
-
while updating my iphone software it got intruppted and now showing connect to itune not getting restored please help
Try doing a hard reset on the phone;
1. Hold Home and Sleep/Wake buttons at the same time;
2. Wait for the Apple logo to appear (ignore the slide to Power Off option)
3. Let go of the buttons when you see Apple on the screen
4. Allow iPhone to reboot;
If you are still unable to get the phone to power on, charge, or connect to iTunes; it could possibly require service. (hardware replacement) -
I tried to reset my iphone 5 from the phone and not a computer. I have had a blank screen with the apple logo and a full progress bar. I can not get my phone to restart. What can I do?
Sorry i meant iOs5 to ios 5.0.1
-
my 4 digit password is not being recognized on my phone AND i am unable to restore my iphone on my old PC, can an apple store restore my phone and unlock it?
Contact Apple's Customer Support - in the US, (800) 767-2775 to find out. But they will most likely tell you what you already know...it needs to be restored against the computer is was last linked with.
-
I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?
I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?
Setting up and activating iPhone
To set up and activate iPhone, turn on iPhone and follow the Setup Assistant. The Setup Assistant
steps you through the setup process, including connecting to a Wi-Fi network, signing in with or
creating a free Apple ID, setting up iCloud, turning on recommended features such as Location
Services and Find My iPhone, and activating iPhone with your carrier. You can also restore from
an iCloud or iTunes backup during setup.
Activation can be done over a Wi-Fi network or, with iPhone 4S or later, over your carrier’s cellular
network (not available in all areas). If neither option is available, you need to connect iPhone to
your computer running iTunes for activation. You might also read http://support.apple.com/kb/TS3424 -
HT1414 restoring my iphone 3gs is not completeing and the phone is not working
restoring my iphone 3gs is not completing and my phone is not working i took it to my local phone shop they told me that the new itunes will not fit onto the iphone 3gs, how can i get my phone to work.
If your restore is failing, there could be MANY issues... You may need to restore the phone back to "new phone" during the restore... PAY ATTENTION HERE... You will lose ALL contacts, photos, videos, voice memos, etc... But you will be able to re-add your apps< and music through itunes. that is very last resort though. if that doesnt work, I would look into updateing your phone. Personally I wouldn't get the 5, just because I dont need the additonal size screen... I have the 4S and LOVE it!! but, do some research, and see what you can find on the matter. But it sounds like your headed down hill fast with that phone... May be best just to upgrade and save yourself the frustration...
-
when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>Wrong Forum
-
i restored my iphone via setting-general-reset, and now it has been on the loading screen for 24 hours?
You need to connect to the compuer via the lighting cable that came with it. IF that failes follow this article http://support.apple.com/kb/HT1808
-
yesturday i bought a brand new iphone 4 and i got home and the guy i bought it from had alot of pictures and apps on it so i tried reseting it and whean i was reseting it it went black and hasnt came in since ive tride to hold power and home but dont work plz help
kawasaki-boss wrote:
yesturday i bought a brand new iphone 4 and i got home and the guy i bought it from had alot of pictures and apps on it s
How could it have been a brand new phone if there were already pictures on it?
I'd ask for your money back.
Matt
Maybe you are looking for
-
Not able to login with domain account on Win10 Enterprise build 10049
On my Windows 10 Enterprise technical preview machine (build 10049), it locked out after inactivity and now only offers the option to login with "Other user". On this screen, it only seems to want a Microsoft account, although if I enter a valid Micr
-
Error when downloading adobe reader
hello, I am trying to download Adobe reader; however, i recieve this error message ERROR 1935. I have tried to change the server and i tried several links but i was not successful. I have windows 8 and I am using google chrome and internet explorer.
-
Attaching file in OWA not possible
Since a while I cannot attach any file when working with Outlook web access application via Safari. It works with Firefox and was working in the past. Any suggestions? Thanks Nenad
-
Saving images back to LR5 from PSCC
I have noticed that when saving images back into LR5 after editing them in PSCC that the images are darker and more contrasty than they were in PSCC. This is when I either merge to 32 bit HDR and save it back into LR for further editing or merge to 3
-
Help!!getting Connection Exception &permission denied for my local system
Hi, I am getting this connect Exception when i am running my RMI program.It is not comming when i am running all the programs[server,client] in my local system. When i put the server program in the server which is linux server and i am calling it fro