TS1363 My father in law decided to clean up my computer and accidently wiped off something important(dont know what).He then took it away and said he would get it fixed.When he brought it back he said that everything was back on  but I needed to install i

My father in law decided to clean up my computer and accidently wiped off something important(dont know what).He then took it away and said he would get it fixed.When he brought it back he said that everything was back on  but I needed to install itunes,Ive installed the latest version and the quicktime.
It seemed to have worked ok and all of my songs are there but when you try to play them, they just dont play.
Ive tried putting a cd in and that wont read or play.
Ive gone on to the itunes store and tried playing a song there,when I click on the play button the blue circle activates but just continues in a clockwise rotation but doesn't play.
I have a old ipod,my wife and I have iphone 5s and a ipad mini.
I am affraid to plug them back into my computer until I sort the problem out.(they had been plugged in before this happened and worked fine.
HELP PLEASE
Scott Hodson

Do you memeber the complete wording of the error message?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

  • My ipod touch is taking ages to back up, I dont know weather it is because I havent had my ipod plugged into my computer for a while or not... I dont know what to do... And i really need it to sinc so i can put new music on. Can anyone help?

    I really need your help. I'm 14.
    I really need to put new music on my iPod and I have plugged it into my computer and its taking ages to back-up and it wont let me do anything until its done. It will take over 3 hours if it keeps on going like this. Please help me. I don't know what's wrong with it.
    It might be because I haven't backed it up in a while but the reason I haven't is cause it takes this long! Anyone know what to do?
    Meg x <This is how I feel. (Confused and really upset)

    You can redownload most itunes purchase by the following. What you can redownload depends upon where you are located.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I keep getting an error when im answering questions for my chacha job i dont know what it means

    when i go to my dash bored on my chacha account i keep getting this error and i dont know what it means
    Error: "CustomXML()" don't work in Firefox/Mozilla toolbar version.
    Please use "setCustomXML(sName, sXMLData)" instead.
    that is the error i get
    == This happened ==
    Every time Firefox opened
    == like 2 weeks ago

    Hello Cassie.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • All my applications  are in trial mode.  I paid for my student plan and still cant install, keeps saying that my trial has expired and then asks me for serial number which i never recieved. i dont know what to do

    all my applications  are in trial mode.  I paid for my student plan and still cant install, keeps saying that my trial has expired and then asks me for serial number which i never recieved. i dont know what to do

    Hi Alena,
    Please refer to the help document below to fix this error:
    Creative Cloud applications ask for serial number
    Regards,
    Sheena

  • I purchased Lightroom 5 in December 2014.  It was my understanding that I would get free upgrades when new versions come out.  I attempted to download LR 6 and it said that the download was happening but there was no progress bar showing.  I left the down

    I purchased Lightroom 5 in December 2014.  It was my understanding that I would get free upgrades when new versions come out.  I attempted to download LR 6 and it said that the download was happening but there was no progress bar showing.  I left the downloading screen open for 3 hours but nothing happened.

    Robert,
    You can purchase Lightroom 6 as a part of the creative cloud photography package, part of creative cloud, as a stand alone product or as a product upgrade.
    If you purchased lightroom 5 as a perpetual product rather than the creative cloud, you would need to purchase an upgrade to Lightroom 6. Udpates are free for stand alone versions, but upgrades need to be purchased.
    If you need to purchase an upgrade to a perpetual license that you downloaded or purchased at a store, see this link: Products .  Scroll down to lightroom and click "buy". Click on the selectable text by " I want to: "and select "upgrade".
    If you are trying to install Lightroom CC 2016 as a part of a creative cloud subscription, you should be able to download and install Lightroom CC 2015 from the Creative Cloud site. Since Lightroom CC is a new product, it will not show as an update in the Adobe Application Manager. Instead, press the  install button next to Lightroom in the Application manager. If you don't see "install" by Lightroom in the application manager, please first try signing out and back in: sign in and sign out of the Creative Cloud desktop app
    If you still have issues, see option 2 in this link:
    Lightroom doesn't launch or quits automatically after splash screen
    Regards,
    Pattie

  • I need to restore my contacts to my iphone 4 from icloud but when following early instructs to turn off contacts in icloud and then turn back on all that happens is the turning off contacts image just hangs for ever and never turns off - dont know what to

    I am trying to restore my contacts from icloud to iphone 4 but when trying to switch off contacts in icloud first to switch back on it just hangs for ever - dont know what else to do - help please

    I am trying to restore my contacts from icloud to iphone 4 but when trying to switch off contacts in icloud first to switch back on it just hangs for ever - dont know what else to do - help please

  • I want old version back; dont know what is it or how to get it. Don't like losing programs that are opened when I close up and turn off computer.

    With prior version, after I closed firefox and shut down computer, the open programs would be back up when I restarted computer. Also, I dont like menu bar. I know nothing about computers. I messed up getting new version. Not only do I not know what version I have now, I do not know older version "Number" either.

    It is not a toolbar, so there is nothing to find in the Add-ons menu about yahoo, it is only when I open a new tab than apears yahoo as a website but before there were options from firefox not a real website if you understand what I mean.
    edit: And sometimes netassistent apears, I don't know what it is and where it comes from, but I found it at Add-ons and deleted it and now is yahoo gone :) thanks a lot!

  • My iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

    my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

    Hello warhogs17,
    After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Whenever I try to sync my ipod, it'll say that it's syncing and then "waiting for changes to be applied" when it reaches step 5, then it closes and nothing happens. I don't know what to do :(

    Whenever I try to sync my ipod, it'll say that it's syncing and then "waiting for changes to be applied" when it reaches step 5, then it closes and nothing happens. I don't know what to do

    Hi, There
    What do you mean nothing happends? because after step 5/5 the sync is complete and it should go back to the normal top screen of itunes. Is this what is happning? of is it freezing on step 5?
    Message was edited by: Scott\'y

  • Can't access my backup to store on new phone. i see that it was backed up yesterday at 1:39  got the new iPhone 6 my contacts came over but none of my pictures

    can't access my backup to store on new phone. i see that it was backed up yesterday at 1:39  got the new iPhone 6 my contacts came over but none of my pictures

    What photos are you referring to? Are these photos that are in the Camera Roll and Photo Stream albums on the device you backed up, or are they in different albums? Are you signed onto the new phone with the same iCloud ID? Are the Photo Stream photos ones that have been taken in the past 30 days?
    When you set up the new phone did you set it up using that backup?
    Cheers,
    GB

  • The iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger

    the iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger. PLS anyone with any solution

    @wetdro
    If your device has been jailbroken during the warranty, Apple will not service it.
    Maybe you missed that in this article:
    Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
    Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
    copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

  • HT1338 i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

    i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

    I dunno, that doesn't make any sense to me.
    I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes.  There are only 3 that run in 32 bit only.  They are all 3rd party, and none of the prefpanes are non Intel.  Like I said, I have never owned a PPC machine.  Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well.  The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
    As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box.  All using the same hardware. but one at a time.  I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to.  (Which I don't)  I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact.  How could ML system preferences be trying to launch prefpanes from a totally different machine?

  • My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do

    My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I had to get my computer cleaned off. I have itunes back now how do i get my phones items back on itunes? I was backed up on icloud

    I had to get my computer cleaned off. I have itunes back now how do i get my phones items back on itunes? I was backed up on icloud

    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
    Use your backup copy to put everything back.

  • We have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc. from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when

    Hello All,
    we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
    from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
    correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
    I have checked IP,DNS,Gateway and more each & everything is well.
    Pls suggest us.
    Pankaj Kumar

    Hi,
    According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
    Please try to enable the option below on the device which has shared folder:
    Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • File Update Crashes Robohelp

    This is a persistent problem that I've had from Day One of using this product. And yes, I have all updates installed. I am able to create the RH project and copy by reference the FM book, and generate webhelp alright, but occasionally and for no appa

  • How to use mdb to print my own struct info on sparc10?

    Hi All, I'm debugging a system panic coredump on sparce10. I tried to print my own struct with command address::print -t my_struct or address$<my_struct, but both of them didn't work. but on x86, it could work. I have googled on internet, maybe i nee

  • Security Deposit in ECC.

    Hi Experts; I need to configure Security Deposit from Customers in ECC. Can any one help in this area? I think we can do it by defining a FI document type in SAP. Please comment. Thanks Arshad

  • EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2

    Hi guys. We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....; Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." w

  • Text translation in run time.

    Hello Guys,                 I have an requirement its like: when we send data from SAP to other system using outbound idoc for material. I need to translate the material text at run time and populate in to some other 2  segments and send. I will be k