TS1363 my iphone 5 is blank an when conected to a power source it just flashed on an off with the apple logo, my laptop is not picking the device up either?
my iphone 5 is blank and when connected to a power source flashes on an off with the apple logo, also my laptop is not picking the iphone up in itunes when i click on devices?
Try restarting the phone by holding the power buton and home buttion for 10 - 15 second
Apple logo should appears and your iTunes should detect the phone
Similar Messages
-
I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?
You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear. -
My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
I have restored my iphone 3gs after having only the apple logo, it took me through all the restore, a page saying 'congrats your phone is now unlocked', and allowed me to chose to set up from new or back up....yet still displays only the apple logo.
Restore as New...
Redownload your Purchased and Free Apps using the Apple ID you Originally used...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
Restore settings on iPhone 3G now it's turning on and off with only apple logo, please help me what do I do?
Anybody there
-
I have got a 13 inch MacBook Pro and it got stuck in a loop so I switched it off by holding the power button down and now when I switch it on the apple logo appears then I get a blank slot at the bottom of the screen then the circle appears and rotates and then it switches off again, I have tried starting it again with the system disc that came with it when it was new but it makes no difference. Is there a sequence that I can use to force it to start.
Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked. -
Why did my iphone 4 just go to the apple logo then go straight back to the home screen?
I was just listening to music on my iPhone when all of a suden my music cut off. I looked right at my phone to see that it went to the apple logo then a few seconds later it went right back to my home screen. The only thing I had open on my phone was my music and a text message I left open for a moment. Is there a reason why my phone shut off? Is somethign wrong? Or am I jsut worrying for nothing?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!
Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome. -
I have an iPhone 3Gs and it has froze on the apple logo. I have held the on/off button and the home button together but the apple logo keeps reappearing. What Can I Do?
Try plugging it into your computer, see if that clears it up or if you can perform a restore from your latest backup.
-
IPhone 3G stuck at the Apple logo screen and will not boot!
Hello
i have a problem i was using one of my iphones and i needed to restore him
When i have done that restore and updated it it will not bootup anymore.
He installed 3.1.3 then it all started.
I have tried many things and restored alot off times
I have tried DFU mode Restore
I have tried Recovery mode Restore
I have tried another usb / port
I have tried a mac book pro and Restore mode(s) Recovery mode
I have tried installing 3.1 / 3.1.2 no succes.
And i have done a few more things and it's still not booting up
This is whats happening now.
{power on}
Black screen with apple logo in the middle
{few minutes later}
The spinning wheel in the middle then its stuck the spinning wheel is not spinning
{alot of minutes later}
You will see a flash and then he starts all over again
This also happens after restoring or recovering.
Could anyone help out with this one..
Thanks in advanced.Hey i kind of have the same issue.
I bought a iphone about 1 year ago and about 2 months ago i was not able to see any wifi connections in the area or connect to any even though i was sure that there was a wifi nearby and my fellow coleauges could connect to it with their iphone. I thought that this might have something to do with the "restrictions" so i went to turn the restrictions off but realised that it had a passcode that i had forgotten. I wasnt able to restore it within the iphone so i restored it from my computer. Once i had finished the iphone had a " connect to itunes " on the screen and it said that there was no sim car installed, even though there was. I tried cleaning the sim card and everything else, i tried connecting it to itunes but it just said no sim card installed. Now i cannot use my iphone or cant even activate it. I have also tried to restore it in recovery mode but ended up with the same problem. Please Help.! Thanks -
I have tried multiple hard resets. What do I do?
Restoring via recovery mode (or DFU) is your only way out...
1. Make sure your iPhone is connected and turned off
2. when connecting your phone hold the honme button until you see the iTunes icon with a usb on it
iTunes may (or may not) show up and click the restore button
Your iPhone will hopefully fixed then -
My iPhone 4 is locked with the apple logo displayed it will not turn off - any ideas please
My iPhon4 is screen locked and will not turn off for me to start over. I have connected to iTunes and held down the button but to no effect. It does appear to be connected to I tunes because IT IS LISTING MY MUSIC. any ideas please
Try Recovery Mode... http://support.apple.com/kb/HT1808
Note you'll lose everything since the last sync, thus the reason to sync often. -
Is there a soulution to where i can keep this one?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
It is very likely that you will have to restore the iPod. -
how do I fix my phone now that it is stuck before the update and only goes back and forth between a blank blue screen and the Apple logo screen. Tried the reset and that didn't work. Please help
Hi Mitchblue,
If your phone is not able to get past the Apple logo, I suggest that you use the following article to help you restore the software in the phone:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?
Did you reset your iPad like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
Maybe you are looking for
-
IPod charges, but doesn't show up as a drive, nor does it show up in iTunes or the Device Manager.
I was given in iPod Touch 8GB (used) for my birthday on the 8th, but I still haven't been able to get any use out of it it. When I plug it into the laptop it charges, but it isn't recognized as a drive, doesn't show up in the Device Manager, and is n
-
Error in mailexample8i_sql.txt PL/SQL sample
Hello, I found error in http://technet.oracle.com/sample_code/tech/pl_sql/htdocs/mailexample8i_sql.txt file accessed from http://technet.oracle.com/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html Problem is in demo_mail.begin_attachment procedure
-
I got some problem in update statement.Can anybody discuss with me regarding my problem? Below is the occured problem. //all the declaration like Connection, ResultSet are declared, setting the ODBC path and so on steps have been set up before this m
-
How to change the blog posts view when navigating through categories?
Hello, currently I've been struggling for a while with the following problem: In my SharePoint blog site I have the following default view of posts: http://s16.postimg.org/yvmu0j51x/Default_site.jpg When I click on a category, I get the following vie
-
3DMark03 PCMark04 not identifying k8n neo plat
Has anyone had a problem with 3Dmark03 and PCMark04 not identifying their K8N neo platinum thoroughly? When I click on System info for example, I get Model: MS-7030, which is correct, but that's about it. Things like "manufacturer" or the AGP por