TS1363 Unable to access secure iPhone update connection

Trying to update my iPhone and get a message that I cannot connect to the secure update connection even though I do have an internet cnnection.
Any ideas?

Hi melapp,
This article has troubleshooting steps for many error messages during updates:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
I would look for similar errors and issues and try those suggestions.
Have a good one,
- Ari

Similar Messages

HT203163 I am not able to access to iphone updates/store; as secure link to itunes store failed. I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works.....

I am not able to access to iphone updates/store; it displays the message under diagnostics 'secure link to itunes store failed'.
I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works......
Please help.

Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

I upgraded to iOS7 without incident and has been functioning fine. However, today, I'm unable to access anything that requires connection. WiFi strong, working fine on other devices - any suggestions?

I upgraded to iOS7 without incident and all has been functioning fine. However, today I am unable to access anything that requires connection. Wifi is strong, and working fine on other devices. Any suggestions?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls

Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts using the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls tab. Has anyone a fix for this problem? If you want to try it out, do the following?
Dial a number from your iPhone Keypad. After cutting the call, try to save the number you just dialled to your contacts by choosing the new contact option. You will see that you will not be able to key in the name of your new contact.

Works fine for me.
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

I get a strong beep when I try to open the download folder-XP SP3-Also unable to access security settings

Unable to access passwords in security settings. Unable to access download folder, get a strong beep. Problem seemed to have just started.

Could be a problem with Advanced SystemCare.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

UNABLE TO ACCESS SECURED EJB USING IIOP FROM JSP

Following codes does not work with IIOP when called from jsp returns an
com.sap.engine.services.iiop.CORBA.CORBAObject:com.sap.engine.services.iiop.server.portable.Delegate_1_1@8312b1 step2 RemoteException occurred in server thread; nested exception is: java.rmi.RemoteException: com.sap.engine.services.ejb.exceptions.BaseRemoteException: User Guest does not have access to method create(). at
Following codes does not work with IIOP when called from a fat client returns an
org.omg.CORBA.UNKNOWN:   vmcid: 0x0 minor code: 0 completed: Maybe
        at com.sun.corba.se.internal.core.UEInfoServiceContext.<init>(UEInfoServ
iceContext.java:33)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
        at com.sun.corba.se.internal.core.ServiceContextData.makeServiceContext(
Properties p = new Properties();
p.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.cosnaming.CNCtxFactory");
p.put(Context.PROVIDER_URL, "iiop://hostname:50007");
p.put(Context.SECURITY_PRINCIPAL, "User");
p.put(Context.SECURITY_CREDENTIALS, "pass");
I have add java option to add IIOP filer
-Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.iiop.csiv2.interceptors.SecurityInitializer
Solution Required: Could you please detail me what steps in need to perform in order for me to access secure ejb using iiop protocol.
FYI -- How ever ejb security works with P4 protocol, If required i can send you the test case ear.
Thanks
Vijay
Following are the server side logs
java.rmi.RemoteException: com.sap.engine.services.ejb.exceptions.BaseRemoteException: User Guest does not have access to method create().
     at test.TestEJBHomeImpl0.create(TestEJBHomeImpl0.java:91)
     at test._TestEJBHome_Stub.create(_TestEJBHome_Stub.java:214)
     at jsp_testIIOP1199698887113._jspService(jsp_testIIOP1199698887113.java:33)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
     at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:608)
     at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:505)
     at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
     at test.TestEJBHomeImpl0.create(TestEJBHomeImpl0.java:89)
     ... 20 more
; nested exception is:
     java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
     at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:608)
     at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:505)
     at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
     at test.TestEJBHomeImpl0.create(TestEJBHomeImpl0.java:89)
     at test._TestEJBHome_Stub.create(_TestEJBHome_Stub.java:214)
     at jsp_testIIOP1199698887113._jspService(jsp_testIIOP1199698887113.java:33)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

That's the code that you need to execute but you should
probably encapsulate that code in Custom Action.
Orion has a EJB Tag Library that is free to distribute that
does all that stuff you just set some attributes.
Go to their site and look at their Tag Libraries.
Also look for other Tag Libraries Freely Available for EJB Access.

Unable to access locked iPhone

I locked myself out of my iPhone 4.
I followed all of the instructions posted here, but when I restore from my iTunes backup, it keeps the old passcode that I don't know. Is the only way to get around this to start from scratch on my iPhone? Because I really, really don't want to do that.
I have tried this restore multiple times but to no avail. Help?

I ended up having to reset to "factory settings" because the last backup I had on my iMac (like you) was done AFTER I had changed the passcode and the new passcode - which the iPhone would not accept - was part of the latest backup! Therefore restoring from "backup" was of no use to me.
Using the "Restore iPhone" when connected to iTunes has got me going again but the downside is having to reload all of the apps, data etc.
Nonetheless, I'm "up and running" again with an iPhone that's accessible.

Iphone update connection timeout error

Cant update my iphone .. downloads all the way up and says connection timeout in the end.. tried several times, same thing... using macbook pro downloading from itunes.. how to solve ?

Did you already check your securit software settings? iTunes has to contact Apple during the update process.
See this article: iTunes for Windows: Troubleshooting security software issues

Unable to access secured site for some

Greetings.
I have setup a secured website on a 10.4 server. The site is the default page in the WebServer\Documents folder.
I can access it fine from work and have had others access it without issue from computers at their homes using typical ISPs. However, when I try to have other access it from other locations using the same login and password, such as a business with its own networks, they are unable to connect. They get back an error message saying the password is in correct.
Everyone can access the site when I have the security settings turned off.
I have set up a realm to handle accessing the site. I have the following also enabled:
WebDAV
IP addess is set
domain is set
I am using Port 80
Realm authorization is set to "Basic"
Performance Cache is on
I DO NOT have the following on or active:
SSL
SSI
I am sure I am missing something else.
Any input would be greatly appreciated.
Thanks in advance for your help.

Open the terminal window in the iMac and enter the following command:
traceroute \[domain name here\]
That will trace the route from your computer to their site and you will be able to see where it stops. There are a number of things that might cause this kind of problem:
1. The website is down
2. There's a network problem between your ISP and them
3. They are blocking your IP address or your ISP for some reason
4. Content filtering or the firewall in your router is blocking the website

Unable to access USB hard drive connected to EA3500 router

WD essential 2GB hard drive connects OK through cisco connect but when I click on the shortcut or try to access the drive I get access denied duer to permission to the ip address

tried with firwall off and tried manually mapping but in both cases no luck. The drive appears in the GUI and I can create new folders on the drive. So it seems the rout recognizes the device but the PC does not want to recognize the drive. Seems something like the security or login access on the PC (XP). Tried creating new login id exactly the same on PC as the router with same password but the PC does not recognize the access.

TS1363 itunes locks up when iphone is connected

itunes locks up when i plug my iphone in

This is SO freakin frustrating! Tired of iTunes locking up my ENTIRE Mac Mini when my phone is connected. I wish Apple would get it together and fix this. Otherwise I WILL move to Google Play. This is SO annoying!!!!

IOS 8.1.3 no back up and now unable to access via iPhone 6+

Where to start... For what seems to be over 8 months my iPhone has not been backing up my contacts even though it is set to do so. My contact on my iPhone and Air are different. The Mac is that same as iCloud, but iPhone 6+ is not. It was the most update. I tired login out of both and then logging in again. No problem on Mac and iCloud on the web. Cannot log in with iPhone. Have a Japanese iTunes account to so tried that and it logged in with no problem. Tried my usual account again and no go. Reset password, and Mac and iCloud are ok to log in but not iPhone.
Any ideas would be hugely appreciated?

I Had the exact same problem and after following all the steps at If you get an error when trying to activate iMessage or FaceTime - Apple Support
i did several resets. Nothing seemed to work until I used my iCloud account to sign in rather than my Apple ID I got in. Apple ID did not work at all. Not sure if this will work for you but it did for me ... Good luck!
Edit

HT1351 iTunes unable to detect my iphone when connected to pc

My friend changed my iPhone's name on my phone, and iTunes in my computer is not able to detect my phone whenever I connect my phone to my computer. Help.

Try > http://support.apple.com/kb/TS1538

TS1398 I have followed this advice and still unable to get my iphone to connect to my home router. This happens way too frequently and very frustrated

I am very frustrated to come home and find my phone not connecting to the router. This is happening frequently and not sure how to correct it.
Help anyone!

When you say it happens frequently I assume that you can connect but the xconnection drops often

Dashboard - Unable to access external data (BW connection)

Hello everyone
I have observed below error when dashboard is opened.
We are using SAP Dashboard 4.0 SP5 (patch 2) and it uses BW connection for its data source (SAP NW connection). Dashboard is run on SAP portal and we are not using BO enterprise.
We noticed this error recently after doing an BW SPS upgrade to BW 7.3 SP11.
I tried opening the query via Business Explorer and Query designer and it succeeded but via dashboard. We used 9 query connection for the dashboard and all of them provide the same result.
I presume that it might be due this but do we have any SAP notes or any solution already for this problem? I looked around SCN forums and couldn't find it. Can anyone help me on this please ?
Regards
Kishore Balachandran

It sounds like your problem is caused by the subnet created by the AirPort Express (AX) for wireless clients. To eliminate this problem, configure the AX so that the option to distribute IP addresses is DISABLED.

TS1363 Unable to access secure iPhone update connection

Similar Messages

Maybe you are looking for