TS1363 Why does ishuffle, used as disk, not play music away from my computer?

Why does ishuffle, used as disk, not play music away from my computer?

Welcome to the Apple community.
Yes, the quality and efficiency of the audio should be the same for both methods. The fact that it isn't may suggest that you have a problem on your network. Have you checked for interference.

Similar Messages

  • HT204370 why does my video and sounds not play at the same time when watching movies

    why does my video and sounds not play at the same time when watching movies

    Welcome to the unity.
    Upon which device are you watching your movies and are you using a home theatre system for your audio.

  • Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera?

    Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera? It does from a K7.

    Because it requires Mavericks - http://support.apple.com/kb/ht5955
    OS X Mavericks provides system-level support for digital camera RAW formats from the following cameras.
    Supported by Digital Camera RAW Compatibility Update 5.04*
    Fujifilm X-E2
    Fujifilm X-T1
    Nikon D3300
    Nikon 1 AW1
    Panasonic LUMIX DMC-GM1
    Pentax K-3
    LN

  • If using airport express on cell network and using only the airplay connected to stereo does it use data allowance if playing music on iOS device " not streaming from net"?

    If using airport express to play iTunes music with airplay feature with cell network (hotspot on cell phone) does it use data allowance?

    No

  • ITunes does not play music downloaded from match

    Hope this is the correct location for this...
    I have iTunes Match, I also have an iPhone 4.
    If i download music from Match on to the iPhone device, everything works fine on the iPhone.
    However, if i plug my iPhone into iTunes, go to device and select Music under my phone, the songs which were downloaded from Match to the device do not play. They just retuen with the
    If i play songs downloaded from Match on the iPhone itself, it works fine.
    iTunes is authroized, and signed in.
    Songs that are hard synced (synced with device plugged into iTunes and not downloaded from Match directly to the device) work fine.
    Any ideas?
    iPhone 4
    iOS 5.1
    Win7 32bit & 64bit (tried on 2 seperate machines, both signed into iTunes & authorized)

    First of all make sure that you have the volume turned up with the control on the right side of the iPad. You play music in the Music App - not in iTunes. If you have the volume turned up and you are using the Music App - restart or rest the iPad and see if that helps.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Why do my ATV's play music sourced from a computer OK but when the same computer plays the same library through Airplay to the same ATV's the streaming breaks down?

    Does anyone know why my ATV's (connected to AV & hifi systems) can play music from a computer OK but when I try to use the same computer and library and play them through the same ATV's using Airplay the streaming often breaks down? Although I could live with the current situation I am missing the opportunity for simultaneous multi-zone playing with single volume control via the Remote App on my iPhoneS. Just find it curious as all the elements of the system are the same, ATV's, computer, router etc and would have expected the quality and efficiency to be the same under both modes of operation.

    Welcome to the Apple community.
    Yes, the quality and efficiency of the audio should be the same for both methods. The fact that it isn't may suggest that you have a problem on your network. Have you checked for interference.

  • Itunes 5 will not play music purchased from itunes music sto

    Just transferred myself from my flat panel imac to a new powerbook & Tiger - updated to 10.4.2. In itunes, all seemed to be working fine till I noticed that music I purchased in the Apple itunes music store would not play! I get a dialogue box saying "This computer is not authorized to play "xxxx". and asks me if I want to authorize it. I do so using my AOL screenname and password and then I am told "Machine authorization was successful. You have authorized this for 1 computer. You have a maximum of 5". I click OK but nothing happens. If I try to play the just-authorized song, I get the same screen ansking me to go thru the authorization process again - to no avail. So strange that this just happens with the music sitting right there in the "Purchased" folder. itunes 5 rejecting its own children. What to do?

    Mike, Hi
    Thanks for yoursuggestions. I did see that article, tried correcting the permissions, looked at a few of the other things, but this doesn't make sense. This would only be the second computer that had these purchased songs on them. SO the 5 computer limit should have nothing to do with it.
    The weird thing is how the computer tells me that it's not authorized to play the purchased songs and gives me the opportunity to put in either an AOL code or an Apple ID code to authorize this computer to play the song. I do it. I get a message that, congratulations, the computer has been successfully authorized to play the song. But then it simply does not play and when you try to play it it just recycles right back to the original message saying that the computer is not authorized.
    Steve

  • Why does ADOBE use the Download manager when you download from thier website??

    it always seems to cause problems. Are they not aware of that?
    I know people will say to download elsewhere, but I think the average user is going to try to get it directly off the website
    Then if you go to
    http://www.adobe.com/products/flashplayer/fp_distribution3.html
    How the heck do you know which one to use? Like I have Windows Vista Home Premium 32 bit with Vista SP2 and use only IE7 browser
    so is it the msi??? or the exe???  I mean why can't they just make it easier??

    Do these links to he flash player that bypass the Download manager, give the correct, secure, and most importantly full version of the Flash player?
    and how does it appear when it downloads? Just that flash pop up that asks if you agree to terms, then the install button?
    I may be going more this way, rather than the "normal" way. I always delete the download manager after I install the flash player anyway

  • Why does the Fox business channel not play its videos?

    about a week ago, the Fox business channel and the Fox news network videos stopped working. They neither start nor play the audio.
    is there something that you can suggest?
    when I go to other sites, the video works just fine. WSJ is an example - no problem
    thanks for your help!
    Annette J>

    Hello, 1968ay. 
    Thank you for visiting Apple Support Communities.  
    I understand that you are unable to play media that you downloaded from the iTunes Store.  This error usually means that the media is not located in the original location for iTunes to read this file.  The easiest way to solve this would be to delete the problematic media and download it again via the two articles below.  
    How to delete content you've downloaded from the iTunes Store
    Download past purchases
    Cheers, 
    Jason H. 

  • Why does my Outputed Rendered Movie not play smoothly?(w/ After Effects CS3)

    I have an Intel Core 2 Duo with 3 gigs of RAM so my exported movie(HD) should playback with no problem, but this is not the case.  Everytime after I render and export my finished project(with After Effects CS3), when I then open it up to play it in Windows Media/Quicktime etc. the movie is not smooth and looks like it's still in the process of rendering. I can't figure this out. If anyone could answer this question I would really appreciate it.  Thanks alot
    Bcurless1000

    See these threads for an answer:
    http://forums.adobe.com/message/2989384
    http://forums.adobe.com/message/2958839#2958839

  • My music will not play since moving from one computer to new computer

    Help, I am really new to this and do not know what I am doing. I have a new computer and followed the instructions to move my itunes from the old computer to the new one, however a bunch of the music when I try to play it has an error that reads "the song "title of song" could not be used because the original file could not be found. Would you like to locate it?
    Help. what caused this and how do I get to make these songs play? Thanks for any input. zemsmom

    +and followed the instructions to move my itunes from the old computer to the new one+
    Which set of instructions? There are lots of them.
    The ! original file can't be found means the path (folder) that itunes expects to find the files in, is not there.

  • Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

  • Why does iTunes use an iPod Photo Cache at all?

    Hi,
    When iTunes is used to synchronize photos to a device, it creates an "iPod Photo Cache" folder.  Why does this folder even exist?
    For users that have multiple devices with multiple resolutions (e.g., iPad 3rd Generation, iPad Mini, iPhone 4S, iPhone 3G), the iPod Photo Cache is grow to approximately four times the original size of the photo.  If I have 15 GBs of photos and a 250 GB hard drive, then the combined usage of 75 GBs (15 GB photos + 60 GB cache) is extremely unreasonble.
    Device resolutions change often enough (these days) such that having multiple devices is probably more common than having more than one of a single product.  iTunes should be designed to do the real-time conversion (which it already does), but not save it to the hard drive.
    Also allowing the ability to change the location of the "iPod Photo Cache" folder would help many users, but not myself since I do not have an external drive.
    Any help is appreciated.
    Thanks.

    Thank you for your response. I should have clarified. When trying to delete from the library, it gives me the option to delete them from the computer or just from the library. I choose not to delete them from the computer, just the library. As a result, I would not expect the deletions to free up room on the hard drive, but I don't see how it actually increases the space used up on the hard drive. If I delete a song from the library, but not the computer, does iTunes save the song again someplace else (such that there are now two copies of the song somewhere on the system)? That seems to be the only explanation for why the free space on my hard drive would decrease after deleting a song from the library.
      Windows XP Pro  

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • Why Does Live View In DW Not Work With BC Template?

    The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

    Hi Alex,
    Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
    Date: Thu, 14 Feb 2013 05:49:55 -0800
    From: [email protected]
    To: [email protected]
    Subject: Why Does Live View In DW Not Work With BC Template?
        Re: Why Does Live View In DW Not Work With BC Template?
        created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
    Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for

  • Error while loading material master data

    I am loading delta data for material master and its giving me the following error: "Programs not generated for InfoSource 0MATERIAL_ATTR and source system". How to resolve this error? Need ur help urgently. Thanks

  • Transport of update rules from one BW system to another

    Hello all, SAP BW 7.0. Two systems: acceptance, development. We adjusted 4 old update rules between DSOs and InfoCubes in development system. Trying to transport it to acceptance system (transactions se01, STMS). Two update rules were transferred suc

  • Error in Flatfile (txt) to xml file scenario

    hi, while executing the Flat file (txt) to xml file  scenario, the txt file picked up from my source directory, but i could not find in my target directory. when i check message monitoring, it is showing successful. Audit Log for Message: af840930-3f

  • Working with iphoto AND Photoshop Elements

    Hi, I currently use iPhoto 5 and want to begin using Photoshop Elements. I am wondering if someone could share their ideas on how to go about using both programs. Here is my objective. I think that I can get more out of my photographs but moving up t

  • 500 gb hard drive 14 gb available --How do I determine what is using all of the space? Macbook os 10.6

    I recently acquired a Macbook that has a 500gb hard drive but I cannot find what is using the space. OS 10,6 installed and I do not have recovery disks. I would like to wipe and re-install/ Thank you.