TS1367 Computer won't turn on. It's plugged in and tried to turn it on. Any help please.
Computer won't turn on. It's plugged into an power outlet and the power light no doesn't turn on and the power lights no longer show up. Can someone please help?
Take it to an Apple Genius Bar or an Authorised Apple Repair Centre.
Similar Messages
-
I recently updated to ios5.0.1 and was syncing my itouch.I noticed that it was taking too long and my itouch turned off. now, i can't turn it on.went online and tried everything from the troubleshooting assistant but nothing works. HELP PLEASE!
Have yu tried everthing here:
iOS: Not responding or does not turn on
Next see if placing the iPod in DFU mode will allow iTunes to see the iPod so you can restore the iPod.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, make an appointment a the Genius Bar of an Apple stroe. -
pleasehelp!
Try this,
Close your iTunes,
Go to command Prompt - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
In the DOS screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
Now launch your iTunes and see if it is working now. -
UUp until just a few min ago the speaker on my iPad air was working just fine then it went into headphone mode how do I get it back to using is own speaker
It is possible that you may have some dust or lint stuck in the headphone jack opening. It may not be visible via external inspection. If you have a can of spray air - attempt to clean out the headphone jack (carefully) with the spray air. If you don't have a can of air - trying blowing sharply into the headphone jack to see if lint or dust comes out. Also try the other suggestions in this post for rebooting the iPhone and making sure that you do not have the phone muted.
~Scott -
My passcode requirement was turned off prior to updating to iOS 7.
It is now requiring my Passcode, but I cannot remember it! And computer won't let me synch because "Find My iPad" app is turned on, which I obviously cannot turn off without getting into iPad Settings.
Do I really have to Reset the iPad?Yes, you will need to restore your iPad. This link will help restore from a lost passcode:
http://support.apple.com/kb/ht1212 -
I have an iPhone 4 and it will not turn on. I plug in and says connect to iTunes. I connect it and it won't restore. What can I do? Please help
http://support.apple.com/kb/TS3694#error21
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on... What is wrong? Can photos and data be retrieved?
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. I suspect a hardware problem due to the hotness. If iTunes can't see the iPod then uor only hope if to contact a data recovery company for getting data off the iPod. If you have an iPod backup you can restore another iPod, iPhone or iPad from the backup to get the data that was in the backup
Apple Retail Store - Genius Bar -
When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David
Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H. -
Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
Thank you. NickOkay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
Re: How do I turn off the compatibility mode for ITunes.
Does that clear up the compatibility message? -
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks
“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony -
I cannot turn on my wifi! I have reset and turned off my phone multiple times and the Wifi button is completely greyed out. please help me
I had the same issue and i just resolved it, I have an iphone 4s and last night was al perfect and this morning i just verified that i had a new updated installed on my phone and my WiFi was disable and did restore as new like crazy until i did this after me being tired of restoring my phone from factory setting and then my lately back up on icloud i did my last move and it got fixed this is what i did ok.
STep #1 Do a back up manualy onto your cmputer throu itunes (NOT ICLOUD) ok
Step #2 after doing the the back up go and do on you phone or throu itunes do the factory reset setting and erase everything and make like new phone
Step #3 Leave yhe iphone conected to Itunes.
Step #4 Once your iphone is reset to factory setting on your Itunes Window will say NO SIM CARD DETECTED before clicking on your right up corner (DONE) slide your phone and it will appear conect to a network do the process and put the pasword of your WiFi and until it says conected,It will say (No Service) but it will be conected to WiFi then click on the Itunes Window (DONE)
Step #5 DO a back up recovery from the last back up you did onto your computer not Icloud ok!!
Step #6 after you recovered your phone from last back up on your computer it will atumaticaly have service and WiFi conection like before..
I hope i did explained well to you i did work for me after 7 hours of doing reset and back up =) -
I am trying to home share with my new MacBook. The music library I am wishing to share is not displaying anywhere on my new laptop under music or library. My computer is authorized and I have tried restarting itunes, etc. Any help/ideas?
Are you using the same ID for homesharing on all devices.
By the way shared libraries don't show up under either 'Music' or 'Libraries'. -
2 day old iphone 5s turns off at 95% battery life and will not turn back on. HELP
So I had an iphone 4s for two years, the battery started to not last as long, so with my upgrade I got the iphone 5s (greatttt). Anyways I had it for a month then all of a sudden I wasn't getting calls, it took over a minute for me to even get a call to send, then once I was on the call others couldn't hear me well, then it would drop (no problems with service, always happened with full bars). Brought it to Apple store, they told me it was a combination between the phone and my SIM card. They gave me a new one and recommended I go to verizon to get a new SIM card. That same day literally 3 hours later, the phone turned off randomly at 65% battery and WOULD NOT turn back on. I had to go back to the apple store, they restored my phone and almost gave me another new one. However they tested the battery and everything and came to the conclusion it was okay and that I needed to restore the phone and set it up as if I did not already have an iphone (not use icloud to bring EVERYTHING over) So we did that and it started to work, that was two days ago. Over the course of the last two days I have SLOWLY downloaded my previous APPS, however the only way to download those are to do it from the "cloud" because apparently I can't just get them from the app store. Well yesterday I got the blue screen of death, however it came back, I thought nothing except that it was over worked. Tonight it went down to 1%, I left it on the charger until it was at 96%. I had NO APPS open. Went to my calendar and added a event for tomorrow, put my phone down and then ten minutes later looked at it and its turned off. It will not turn on, I tried rebooting pressing both buttons, Ive plugged it back it, switched outlets, switched cords, NOTHING.
Of course I wish I never got the iphone 5s at this point.
What now?
Back to Apple again?Yep.
Just like cars, you lucked on a lemon. -
I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?
Maybe you are looking for
-
How do you get the Apple website to recognize a new pc tower?
My account was started in December 2012 and I bought a new Dell tower in February. I wanted to buy music yesterday and found that I could buy it but not download to my ipod because Apple did not recognize my pc. I removed the information on the old p
-
Jar not working in machine where Oracle 10i is installed
I have an executable jar file for which i have to set two class path variables the jar file is working correctly in normal windows enviornment but in a machine where oracle 10i is loaded it is showing error that "could not find main class program wil
-
How do I stop the ATV remote affecting my wifes Macbook Pro?
As I make selections via the remote the ATV does just what it should but it also seems to (dis)manage my wifes Macbook Pro. How can I stop the remote from trying to control the Mac? Thanks
-
Fade in fade out pics in flash
Hi there ive just downloaded the flash catalyst cs5 trial version and am trying to create a fade in fade out effect with my pictures so i can upload to my website. Ive been on it for two days now and am getting no where anybody have any suggestions o
-
How to identify the material's status within GR blocked stock
Hi Experts: We have the goods receive for purchase order process is that all the goods from supplier reference to PO should be move to GR blocked stock first(103), and release to un-restricted stock after goods quality inspection(105). Those qua