TS1367 My charger connects with my macbook with a very faint green light (not the normal orange light) and can maintain the computer turned on but does not charge the battery.

My charger connects with my computer with a very faint green light (not the normal orange light) and can maintain the computer turned on but does not charge the battery. The power source to keep it on is the power adapter and that it's "Not charging" on the battery settings. And my charger seems to charge other computers fine.
The part of my mac where the adapter (L-shaped, magnetic) attaches is a bit damaged - a small piece of the white case/body around the part where the adapter attaches is broken off, but that's just an outer damage.
I don't know what's wrong with my computer, and if anyone has had a similar experience or knows what's going on, it'd be tremendously helpful!
Thank you!!

Hi Christopher,
Doubtful an upgrade would fix a hardware issue. If you are thinking of upgarding to Lion, best to do all necessary maintenance first.
Try Resetting the System Management Controller (SMC)
If that doesn't help try here >  Apple Portables: Troubleshooting MagSafe adapters

Similar Messages

  • HT5163 I turned my iphone off when visiting the doctor's surgery and now it won't turn back on.  It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens.  I have taken out and replaced the sim card too.  Any sugg

    I turned my iphone off when visiting the doctor's surgery and now it won't turn back on.  It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens.  I have taken out and replaced the sim card too.  Any suggestions

    If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
    Best of luck.

  • Unable to sync music in Library of MacBook Air with iPad and iPhone. Appears to start synchronising but does not actually do it. All devices run on same Apple ID. Suggestions please.

    Unable to sync music in Library of MacBook Air with iPad and iPhone. Appears to start synchronising but does not actually do it. All devices run on same Apple ID. Suggestions please.

    Re Outlook for Mac - can anyone confirm that this will acheive my aims to have emails and associated folders within email to synch across all devices and that calender will also sycn across all devices using iCloud ?

  • My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

    can somebody please help me fix this issue, i have been sitting at my computer all last night and this morning trying to figure it out. It could be the hardrive or anything really i just need to get it working. Alot of important things that need to be done using this computer and i am freaking out.
    My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • BB recognized by computer & Desktop Manager, but does not connect?

    All right, I've scoured these forums and can't figure this out. Tell me if I've missed something.
    Blackberry is recognized by my computer AND by Desktop Manager, but does not fully connect so I can sync. I can see it in My Computer, and the Desktop Manager does recognize the model of smartphone when it's plugged in. Both Windows, and Desktop Manager ask me for my password when I connect the USB cord. However, it just says 'connecting' in the bottom right, and never gets past that. When the phone is initially plugged in, the screen goes to the clock (normal), and flashes the 'connection' screen (BB and computer icons connecting with a cord). It flashes that screen twice then goes back to the clock. The Desktop Manager then just keeps trying to connect, until I unplug it. Both the computer and desktop manager recognize when I've unplugged it.
    Running:
    Windows 7, 64bit
    Desktop Manager 6.1.0.35
    Blackberry Tour 9630
    This is a new computer. I was running Windows XP with Desktop Manager 6.1.0.35 previously, and it worked no problem, but that is no longer an option.
    The goal is to be able to sync with Outlook 2007. Need very badly to be able to do this.
    Did all the simple stuff:
    Oh so many Windows restarts,
    Blackberry battery pull, both unplugged and plugged into computer with Desktop Manager running,
    Desktop manager reinstall,
    plugged into every different USB port,
    tried a different cord.
    Went deeper:
    BB USB drivers fully up to date
    Turned OFF USB power management on all my ports in device manager,
    Disabled USB selective suspend setting
    Deleted my intellisync folder in appdata/roaming,
    Turned off Windows UAC notifications,
    Tried every combination of BB memory compression on and off, or mass storage mode on and off,
    There might be more I've tried but don't remember. I've been searching the net for days now.
    Please let me know if there's anything else I can try. This is a serious issue for me right now, I need to be able to sync with Outlook 2007.
    Thanks in advance

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I have an eMac which I want to connect to my home wireless network. My router is D-Link-601 tech 802.11n. My emac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

    I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

    You need the Airport card OR Airport Express but not both.  Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
    To set up the AE, you do need OSX 10.4 or higher.

  • When trying to sync with itunes error message reads Apple mobile device not started.  I pod turns on but does not connect to itunes

    When I try to sync my ipod with itunes I get an error message which tells me Apple mobile device is not started.

    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    This error is associated with ringtones, are you trying to sync a ringtone, purchase a ringtone...need more info...
    I have also an error message saying it cannot sync and error message number 0050.
    Are you on Windows XP? Is this the error message...iTunes displays -50 error message? If so, follow these directions:
    http://support.apple.com/kb/TS1539

  • HT3964 My MacBook pro starts to come on with apple sign and turning wheel but does not go past that

    Please help urgently

    Sojiwoye wrote:
    Thank you. I used the command and R buttons and tried reinstalling Os with disk supplied because Internet speed very slow to reinstall from Internet here. With CD inside it is showing the apple logo and then three beep sounds in succession and not going further
    That is becaause the disc you are using is for an older version of OS X, more then likely Snow Leopard, and will not install because you are now running a newer version of OS X, Lion.
    Your only option is to download Lion frim the internet to re-install it or buy the Lion install USB thumb drive from Apple.

  • How to share my internet connection on my macbook with my iPhone ?

    Hi guys, Do you know how to share my internet connection on my macbook with my iPhone. I have already made my own network, and I allowed sharing Internet , but it didn't work. Can you help me , please?

    If your carrier provides the service, go to Settings > General > Network > Personal Hotspot.  If you don't see the Personal Hotspot option, then your carrier does not support it.
    Note that you'll have to pay for a 'tethering' data plan on top of your normal iPhone data plan.

  • TS1367 My MacBook turned on but is stuck on the white screen with the apple and the loading circle.

    My MacBook turned on but is stuck on the white screen with the apple and the loading circle.

    Hi there Mpontari,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    -Griff W.

  • Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

    Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
    My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
    Only the option "connect to wlan" is succesful.
    With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
    With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
    My notebook is a MacBook pro.
    Any idea????
    Thank a lot in advance!
    Kind regards
    Ingo

    Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
    That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
    Apple - AirPort Extreme - Feedback
    If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
    The "catch" here is that you must have an Apple router providing the network to be extended.

  • I am about to buy a 13" MacBook Pro with 256 GB SSD drive.  I want a i am about to buy a MacBook Pro Windows partition set up.  How large should it be, and can I use XP Pro or does it need to be Win 7 or 8?

    I am about to buy a 13" MacBook Pro with 256 GB SSD.  I want a Windows partition set up.  What size should it be, and can I load Win XP Pro or does it need to be Win 7 or 8?

    You can use XP but it has to be in a Virtual Machine and OS X as the host instead of as a dual boot system with XP in its own partition. That is how I run Windows on my Mac, in a Virtual Machine.
    Take a look at VritualBox from Oracle. It's free and works very well.

  • TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
     Cheers, Tom

  • On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

    How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

    The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
    Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.
    If it's not an extension or plug-in issue, delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.

  • I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

    I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

    http://support.apple.com/kb/ts1538

Maybe you are looking for

  • Does JBoss has allow-concurrent-calls like in Weblogic for recursive method

    I have my problem listed at http://jira.jboss.com/jira/browse/JBAS-1443 My problem is that i am using Recursive function and so I need to have my Stateful bean accessed through remote interface but such access is blocked due to EJB specification. The

  • Tax conditon types in Material master

    Friends, We have assign  tax conditon types (CST & LST) to country now when we create material thsese condtion types are coming in material master. We want to restrict these condtion types when user create material in the plant whihc is in US. How we

  • Hi Adobe: Please Help !!!

    Hi, I am building a PDF form in  LC Desginer9.0. I have a requirement to browse a file and display its complete path in a textField. (No need to attach it, just need the complete filename with path) I am not getting any way to do so. I am stucked in

  • I have a ibook running on 10.3 and I want to update it to 10.4 or above,is this possible ?

    I Have an ibook running on 10.3 and I want to update it to 10.4 or above ,is this possible ?

  • Bug: 1.5.1 database copy dies silently

    When using the tool 'Database copy' with a source schema with a lot of data, the tool dies silently with the following error : Exception in thread "RunnerThread" java.lang.OutOfMemoryError: Java heap space The same exception also happens when using t