TS1367 SSD Replacement Hard Drive won't boot on my Macbook Pro; Any ideas why?

I recently replaced my hard drive for my Macbook pro. I built a bootable SSD drive in a SATA/USB caddy, which works perfectly until I install it in my laptop where it will not boot. Has anyone got any ideas why this might be the case?

What model MBP? (exactly)
What model SSD?
How did oyu test it in the caddy? Most dont work on bridges. Min didnt.
and..why is this is the xserve section?
Grant

Similar Messages

New hard drive won't install in my macbook pro 13"

Hi everyone
I have recently been having problems with my mac book where I was constantly seeing the spinning beachball. I had wiped the hard drive and was still having this problem so took my mac book to a "genius" at my local mac store who told me that the hard drive was faulty. I was out of warranty so he advised me how to change the hard drive and recommended me to install a crucial 240gb M500 SATA 6Gbps 2.5 SSD. I have now fit this into my mac book and have done internet recovery to allow me to get to Disk Utility. My computer recognises the new Hard drive but when I got to erase the disk to enable me to install the operating system it just hangs attempting to unmount the hard drive. I left it over night and nothing happened. IS there something I have done wrong or is there another way of me installing the operating system onto the new hard drive?
Many thanks in advance

Hi Clinton:
off topic: remembering your beautiful 980GB M500, i want to point to two things that I came repeatedly by:
1. the M500 has more "overprovisioning" than most other Crucial ssds ( I thought that you might want to hear that.
2. Lately I hear more and more comments by respectable manufacturers that Trim in Mac OSX should be avoided: the "enabling" softwares are a bit crippled software and there are many timing faults at the file level communications, which are counterproductive.
So I followed the recent comments of a OWC staff member:
"One way to live without TRIM on OSX is just reduce the volume on the drive and leave the unallocated space...unallocated. If you have a 240GB drive I suggest removing 40GB.
The drive will map this into the over provisioning and move the space in and out of use on the volume very quickly...almost faster than TRIM does
Also remember the drives do have garbage collection and will look after themselves if given the chance too".
So I restored the complete original IOAHCIFamily.kext ( by running a Combo Update) on all my SSDs, and with DiskUtility I dragged the bottom of the startup partition up for about 40GB and left it unallocated (no format).
I remember that you did not install Trim (?), but to be sure I send this to you.
Have fun my friend,
Lex

MAC PRO HARD DRIVE won't boot

HARD DRIVE won't boot past APPLE ICON, grey spinning wheel on grey screen. Tried using install discs, no go past the icon.
Replace small battery inside? replace chips? Logic board replace as last resort. Can't take it away from work at this point to an apple tech.
Had just installed updates to snow leopard and was successful...but went to restart it...and this crap happened.
Thanks for any help.
MT1111
< Edited by Host >

I'll try that tomorrow. Thinking it could also be:
1) The PRAMM battery. found info on that they can wear out close to 5 years. This MAC PRO is close to that now. And I use a lot of power on it.
2) MAC PRO is plugged into a SURGE PROTECTOR, instead of right into the wall outlet.
3) Been doing a lot of FORCE QUITS and HARD BOOT -- unplugging it directly when it wouldn't shut down soon enough -- lately this past year.
I just assumed that this MAC PRO with the XEON QUAD CORE etc., was a heavy duty enough NLE,
that i wouldn't have these problems. It's not fully loaded with all the chips it can carry...and I don't have near enough external terabyte hard drives for storing video and audio files to edit. I've been storing wayyy too much
on the internal hard dives and just have to stop that.
I noticed these past few days that much of the LETTERING for hard drive icons and folders' titles
were starting to look in OVERLAPPING of the lettering. That was my first hint that something was up.

I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

I just tried this, no luck...
I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

New hard drive is not recognized by my MacBook Pro.

New hard drive is not recognized by my MacBook Pro. The supplier says I need to update my BIOS. True? How do I do that?
Hard drive: NN2-72-500-SSE Seagate Momentus 7200.4 (ST9500423AS) 500GB Laptop Hard Drive
Mac OS: Mac OS X Lion 10.7.5

I went through a similar issue with a Seagate Momentus 750GB HDD/8GB SSD with my late-2011 MBP. No matter what I tried, the machine would not recognize the drive.
To test it, I installed the drive in an old ThinkPad, and it worked fine. Then I tried installing it in my PS3, and the drive worked fine there, too. It was only the MBP which had issues.
I don't *think* Macs have a BIOS to update. But I know my MBP has issues with certain HDD's (including another external which works fine on other Macs and all Windows machines).
You might be able to find my thread by searching under my username, perhaps something in there will offer a tip. Otherwise, you might have to go the same route I did: install a WD Scorpio Black instead. Or upgrade to an SSD.
Good luck to you-

I want to upgrade my Hard Drive to 1TB and more. What is the maximun Hard Drive I can install for a MacBook Pro 2009 Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back

I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?

The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

My WD 2tb external hard drive will not unmount from my MacBook Pro.

My WD 2tb external hard drive will not unmount from my MacBook Pro. It no longer even shows up in finder, however it does show up in Disk Utility. I have tired so many of the suggestions on the internet all to a fail.
I keep getting the message to be sure that all applications are closed before ejecting the drive. I have no clue how to tell which appliactions are using the external drive to shut them off. I turned off Time Machiene to be safe.
I don't need anything on the external drive, I am just trying to erase it, save my current info, and migrate it to my new MacBook Pro.
I have been about four days now with this issue all over the internet, in this community, and watching videos on everything and nothing about this topic to a fail.
I think I am doomed and have lossed this external drive because of some wierd application that will NEVER close on my hard drive for it to disconnect correctly. It's annoying.
Does anyone have a solution?

Have you trie using another USB port? Can you test the USB ports with other USB devices to assure they are working? You may want to reinstall OS X in case there has been a driver glitch.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

You can't upgrade to a 7200rpm hard drive in the Early 2011 13" MacBook Pro. It is not supported. Period.

I tried unsuccesfully to upgrade the hard drive in my Early 2011 13" MacBook Pro to a 750GB 7200RPM hard drive. After several attempts with different hard drives I realized that the kernel panic that showed up was due to the lack of compatibility with the drives to the MacBook Pro. I had a Mid 2009 13" MacBook Pro that I did not have any issues with whatsoever. I sold that MacBook Pro and was able to upgrade to the brand new base model without any out of pocket cost. Upon purchase of the new 13" MBP I maxed out the RAM to the full 8GB. After 2 months of freezing, lockups, spinning rainbow wheels and having to force shutdown I tried one last ditch effort to see if a faster drive would help. After speaking with the Apple telephone reps and the Apple Store Genius Bar we discovered that Apple doesn't even offer the option of a 7200RPM drive on their website - a fact that I found quite disturbing. The concensus is that it is a power management issue that causes the incompatibility and the reason the drives are not offered on the 13" models. The problems I had were the end of the line for me. I just switched out that train wreck for the Early 2011 15" MacBook Pro base model. I got home and immediately installed the 750 GB 7200RPM Western Digital Scorpio Black hard drive and it was recognized within seconds. I'm back in business with gleeful abandon.

Sadly... they don't have all the answers. As someone who use to serve in the capacity (Mac Genius) it can definitely be a challenging position. You're "the voice" of Apple's service policy & procedures. Sounds like the person you spoke with got it wrong this time. It's definitely worth a follow up, because like I said, I've got a machine in my household that's living proof of compatibility between a 7200 RPM drive and 13" MBP (Early 2011).
Apple is very good about support documentation when there's incompatibility or unsupported configurations, the fact that there isn't one for 7200 RPM drives would tell me that the people/person you spoke with was misinformed.
I know I always appreciated when a customer made it known to me that I was wrong on something and supplied the right answer. I sure as heck don't have all the answers and if I can lead from my mistakes, well, I won't make them anymore.

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro?

Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro currently running a 160 GB Hard Drive?

It depends upon exactly what you want to do with your Mac. My old Late 2007 17" MacBook Pro only has 4GB RAM and it works fine. It is a little slow if I am doing anything involving heavy computing (rendering video, compiling programs, etc.) but it works just fine. In most cases, the increased RAM will help performance, but the cost can be fairly high with an older machine like you have.

I have an 8 year old eMac G3. It will not start up. I need to erase it before putting it in recycling. Apple refuses to open the case and warns me that I will be shocked if I even try. They say no way to erase hard drive. They say use a hammer. Any ideas?

I have an 8 year old eMac G3. It will not start up. I need to erase it before putting it in recycling. Apple refuses to open the case and warns me that I will be shocked if I even try. They say no way to erase hard drive. They say use a hammer. Any ideas?

Hi, no eMacs had G3s, only G4s. Is it maybe an iMac G3?
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
http://www.ifixit.com/Device/eMac

How large of a hard drive can i put in my Macbook Pro (early 2011)

how large of a hard drive can i put in my Macbook Pro (early 2011) and where can i get one?

You can find answers to both at OWC as well as installation tutorials. I think you will find 1 to 1.5 TBs are the largest.

HT201250 I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

How do I set up Time Machine to a shared drive on another Mac?

WD Smartware, external hard drive back up not recognized by Macbook Pro

I use WD external hard drive as back up for my Macbook Pro using WD Smartware. All software is upto date but when I plug in my external hard drive it is now not recognised by my Mac. It does not appear in Finder or Disk Utility but it does show up in System Profiler. It has worked fine until now. I have changed the UCB cables multiple times, the external WD hard drive has its own power suppy and other external hard drives work in the same usb port. When I plug the external drive into a PC it is recognised but obviously will not let me use it. When I go to access via the PC it prompts me for the password to open the drive, however when I plug into my Mac, when I click on 'unlock drive' its says that the drive is not locked. The WD Smartware software runs to check the files on my Mac but after categorising them the 'back up' option is not highlighted and it will not access the external WD drive.
How can I access the WD external drive ? System Profiler data is below. Many thanks, apologies for any ignorance and thanks in anticipation of any help !
My Book 1110:    Capacity:     804.4 MB (804,421,632 bytes)   Removable Media:     Yes   Detachable Drive:     Yes   BSD Name:     disk1   Product ID:     0x1110   Vendor ID:     0x1058 (Western Digital Technologies, Inc.)   Version:     20./My Book 1110:    Capacity: 804.4 MB (804,421,632 bytes)   Removable Media: Yes   Detachable Drive: Yes   BSD Name: disk1   Product ID: 0x1110   Vendor ID: 0x1058 (Western Digital Technologies, Inc.)   Version: 20.18   Serial Number: 574341565931323033383539   Speed: Up to 480 Mb/sec   Manufacturer: Western Digital   Location ID: 0xfd130000 / 5   Current Available (mA): 500   Current Required (mA): 2   Partition Map Type: Unknown   S.M.A.R.T. status: Not Supported   Volumes:   Capacity: 700.4 MB (700,448,768 bytes)   Writable: No   BSD Name: disk1s0   Capacity: 32 KB (32,256 bytes)   Writable: No   BSD Name: disk1s0s1 WD SmartWare:   Capacity: 229.7 MB (229,672,960 bytes)   Available: Zero KB   Writable: No   File System: HFS    BSD Name: disk1s0s2   Mount Point: /Volumes/WD SmartWare18   Serial Number:     574341565931323033383539   Speed:     Up to 480 Mb/sec   Manufacturer:     Western Digital   Location ID:     0xfd130000 / 5   Current Available (mA):     500   Current Required (mA):     2   Partition Map Type:     Unknown   S.M.A.R.T. status:     Not Supported   Volumes:   Capacity:     700.4 MB (700,448,768 bytes)   Writable:     No   BSD Name:     disk1s0   Capacity:     32 KB (32,256 bytes)   Writable:     No   BSD Name:     disk1s0s1 WD SmartWare:   Capacity:     229.7 MB (229,672,960 bytes)   Available:     Zero KB   Writable:     No   File System:     HFS+   BSD Name:     disk1s0s2   Mount Point:     /Volumes/WD SmartWare

mjunder Hong Kong
   I use WD external hard drive as back up for my Macbook Pro using WD Smartware.
To be a parrot,.......REMOVE the WD garbageware.
Western Digital warned its users about its OWN software couple months ago.
Remove ANY and ALL WD software products.

External Hard Drive Issues using WD Passport with MacBook Pro

I am unable to view my external hard drive (WD Passport 160gb external hard drive model # wd1600me-01) with my MacBook Pro. I already tried using the Utility Disk application by utilzing the repair function and mounting it. Please help. Any Suggestions?

Im familiar with that HD, I have one currently disassembled for just the bare HD...., it has a removable SATA bridge, if the HD wont spin up but the light comes on, on the HD, then the SATA bridge is bad.
If it appears in disk utility and the light comes on BUT the HD doesn't spin up, then either the SATA bridge is dead, or the HD is dead (least likely).
Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
those external HD use a 50 cent SATA bridge famous for failing. The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
It doesn't matter it was used once and stored away for 5 years,.....HD lose their ferromagnetic properties at about 20-40% at 4-6 years.
And if stored in a hot place, a LOT more.

TS1367 SSD Replacement Hard Drive won't boot on my Macbook Pro; Any ideas why?

Similar Messages

Maybe you are looking for