TS1367 What to do when I do not hear the fan in my Powerbook G4 and it overheats and shuts down?

My Powerbook G4 shut down in the middle of a power point creation. After a couple of days it booted up again. However, I do not hear the fan running the way it used to. I believe that the fan stopped working. I can use it but if kept on for more than 1/2 hour, it overheats and locks up. How do I get this fixed?

Since Apple no longer is supporting the PB G4, you'll either have to find a fan for it on your own or find someone else to work on it for you.
Allan

Similar Messages

Here is what to do when rentals do not show up in your itunes library!!! Windows and Mac

Windows
Step 1: Make sure your rental is in your purchase history...here's how
-Click on the Store Tab
-Click View Account
-Scroll down to Purchase History and click See All
-Your latest purchase should be listed at the top of the page
Step 2: Click Start
Step 3: Click on Music tab
Step 4: Double-click on itunes
Step 5: Double-click on itunes media
Step 6: Double-click on movies
Step 7: Find rental in list and left-click on it
Step 8: Click on option Open with itunes
Step 9: Movie should now start playing.
This worked for me after many times having the rental dissapear. Took a lot of research but finally found the answer. Please let me know if this helps. Thanks(:
I do not have a Mac but am pretty sure this similar solution will work.
Step 1: Make sure your rental is in your Purchase History...instructions listed in my Windows solution.
Step 2: Click on Music
Step 3: Click on itunes
Step 4: Click on itunes Music
Step 5: Click on Downloads
Step 6: Rental should be listed

Welcome to the Apple Community.
The Rental section should show up when the movie has fully download, are you saying it hasn't.

When i call someone i can not hear the phone ring or the people talking. they can not hear me either. what i do notice if i select speaker then i can hear them through the speaker phone only

when i call someone i can not hear the phone ring or the people talking. They can not hear me either. what i do notice if i select speaker then i can hear them through the speaker phone only

If there's an Apple store nearby make an appointment with the genius bar to have it checked. Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.

What do I do when I can not find the curser

what do I do when I can not find the curser

The esc key will hide the cursor, hitting the esc key again will reveal it.
So try hitting the esc key and then move the mouse (or swipe the track pad). If there is no cursor visible anywhere, do the same thing again.

Dear community, what to do when iMovie does not automatically updates video from iPhoto. I've closed and reopen, restarted... still no good

Dear community, what to do when iMovie does not automatically updates video from my iPhoto. Usually it will automatically generate new content, but now it's stuck 3 days behind the latest new iPhoto entries... I've restarted all programs, restarted the computer... what else?

Ezy,
I'm not sure what recourse you really have. My expectation would be that Apple is on the hook to warranty your computer, but they only warrant the machine you've got.
The issue of exchange is fully in the hands of the dealer. If it were Apple, they would likely have had a longer return/exchange period (2 weeks is standard in the US, and I think they use the same timeframe internationally), and there have been some reports of people getting machines exchanged even if they were just outside the 2-week period.
However, with Apple dealers, I think they are a little more concerned about old inventory. Who knows what Apple does when you give them back a last-gen Macbook. They probably sell it at a markdown, but even marked down, they still get a profit (most likely). When an authorized reseller gets stuck with an old machine, they probably have to sell it at a loss. Thus, I would expect resellers to be more afraid of holding onto discontinued models.
That said, if they do a lot of business, they should appreciate the value of customer loyalty: it's usually better to lose money on one purchase than lose a customer (and all their future purchases). If you're a regular customer there, you could point out that disappointment could cause you to go to a competitor. That's playing a bit of hardball though.
However, there is maybe an upshot to all of this... The new 13" model did not get the quad-core CPU's.. And it lost its dedicated graphics adapter. I've seen a decent number of people complaining that the new 13" model is worse than the previous one (the one I'm assuming you've gotten). So it might not be such a bad thing after all.

HT1212 What to do when you have not synced to itunes and when it says to connect to itunes?

what to do when you have not synced to itunes and when your ipod says connect to itunes?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Asking the Bridge Team: Bridge "working color space" setting when one does not have the Suite?

Common sense tells me there is really no such thing as a
"working color space" in Bridge, because
Bridge is not an image editor, just a browser
Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
Is there a way to set the Bridge
"color settings" when one does not have the suite?
The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
(not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
But what if I wanted Bridge to assume my
Photoshop color working space for untagged images
so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
there is really no such thing as a
"working color space" in Bridge, because Bridge is not an image editor, just a browser.
Thanks in advance.

Hi Ramón,
Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
How do I report this to the Colour Police at Adobe?!?

When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

Erica,
     I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
     I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
     It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
     Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
     I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
   For the rest of us, please post when you find a solution.
     Best.
     BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

How do I get a PDF document put into an attachment form that I can drag to an e-mail. Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the

How do I get a PDF document put into an attachment form that I can drag to an e-mail. Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the e-mail. What have I done differently?

Thanks again for the detailed instructions Srini!
And I really hate to be a pest . . . but . . .
Using your example and not modifying it, I get the e-mail form filled out correctly and the pdf attached, however, I'm not prompted to sign it.
Any more clues?

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!

Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?

When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?

What kind of videos are you watching?
You need to force quit Safari, but hitting Command-option-esc, and force quit Safari.

HT201210 what if it says itunes could not contact the iphone software update server , what to do ?

what if it says itunes could not contact the iphone software update server , what to do ?

99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, because it appears that it was not officially unlocked.

I have a Mac OS X Snow Leopard version and my fan keeps coming on. I have been away for a week so it has not been used and yet when I started it up the fan started straight away. Is there anything I can do? Please help! Thanks

I have a Mac OS X Snow Leopard version and my fan keeps coming on. I have been away for a week so it has not been used and yet when I started it up the fan started straight away. Is there anything I can do? Please help! Thanks

Yes, look in Activity Monitor (Applications /Utilities /Activity Monitor.app) and see what it eating up all the %CPU. If anything is over 40%, post the name here to get advice or just kill it straight away with the red 'Quit' button.
If nothing is using up CPU resources, but the fans are going full blast, do an SMC reset. Read the instructions here:
http://support.apple.com/kb/HT3964

TS1367 What to do when I do not hear the fan in my Powerbook G4 and it overheats and shuts down?

Similar Messages

Maybe you are looking for