TS1368 I am curious what I can do to fix my itunes, if I try to click on music in itunes from my phone, it gives me a message, "too many HTTP redirects." Has anyone else had the same problem? I don't know what else to do to fix this...
This is what I get when I go to iTunes and try to look up music. I've tried to clear my cookies in hopes that it would change this iTunes mishap. I'm out of ideas how to fix this issue, any information would help.
try a new/fresh apple brand cable and make sure it is the only usb cable in use. this worked for me, i noticed i had no problem with a lighting cable. i did a restore from scratch and from backup and it did not help me...and if you cant sync than you wont be able to get anything but apps back after the restore
Similar Messages
-
I recently updated my Iphone 4s to the newest IOS and I now cannot turn on Wi-fi. Has anyone esle had the same problem? Is there a fix? I've tries restoring to a previous software update, but it appears the wi-fi was completely disabled and I do not have the ability to turn it on.
Apple is aware of the issue and is expected to release 7.0.3 next week to address iMessage issues.
In the meantime I have found that a good old fashion reset cures it for a while. -
I had my Imac27' for about 1 year (I bought it january 2011) , and it worked fine. But two days ago a problem started. The screen is turning black suddently, and it stay like that until I reboot it. It's not cool. The first time it happen it was hafter a very long days of video editing, I tought it was to hot. But now I just started up the Imac and 10 minutes later it happen. And now I transfer my desktop on my second screen, because the one of my Imac is constantly shutting of. What is this? Can I do something about that?
I´ve came across with the same problem and when I look out for solutions I found out that basically I had Three options
1.- Dim the brightness to the first 2 dots (that is the limit for me, anything above that shuts down again my screen)
2.- Replace an expensive part of the screen (about $900)
3.- Try with an external monitor to see if the problem was the screen or something else
What I did was to plug my flat screen to my mac with a Mini Display Port to VGA Adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?fnode =51
And… Problem Solved! now Im going to buy a Monitor that gonna cost me less than half of the replacement parts, my main monitor will keep siting down if i dim it above the 2 dots but at least I will have the other to work properly
So that´s that, I hope someone finds this helpful
P.S. Sorry if my english it´s not that good -
I set up the primary language to English while initializing the MBP, but at the log-in page, the language appears to be a foreign language I don't use, after restart, the language turned into English, has anyone come across the same problem, and is that normal?
i have a similar problem...It seems to be tied to my guest account. It is set to Japanese as primary language but my main login is set to English. I tried changing the guest account to english but the change won't hold. It always reverts to Japanese.
-
when i turn my macbook pro on , the apple logo shows up, but it is just loading. I have tried to turn if off , but the same problem appears. Someone know what the problem is?
Boot into Safe Mode
A Safe Mode boot can take a few minutes compared to a normal boot.
Once you are in Safe Mode open System Preferences > Accounts > Login Items
If you have anything listed there to launch when you startup your Mac, delete all items.
Then go to the Apple menu / Restart.
You can also use Safe Mode to do a "live verification" of the startup disk in case it needs repairing.
Help here > Using Disk Utility to verify or repair disks -
Everytime I try using iTunes on my iPhone 5 I keep getting the message appear Too many HTTP redirects HELP !!!!!
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
Have you tried ALL the recommended troubleshooting steps yet? -
Has anyone else had the same problem with SYSMAN password resetting?
I am a Oracle Support Administrator and have posted a SR with Metalink and just wanted to ask the community if they have had any of the same problems.
I am remotely accessing a customers Grid Control via VMWare software and over the past couple of weeks I have been trying to access GC with the Sysman user. The password seems to be either resetting itself or there is a bug in the system. I have checked to see if there is a expiration script running or something similar with no result. It is definitely being altered somehow at the Grid Con end of things. I checked to see if it was resetting in the emon.properties file in the oracle home, this was not the case. So am really stuck.
I have to change the password via SQL+ for it to come back online.
Any ideas or suggestions would be grateful .
Thanks all.just follow this....
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/repository.htm#sthref807
9.2 Changing the SYSMAN Password
The SYSMAN account is the default super user account used to set up and administer Enterprise Manager. It is also the database account that owns the objects stored in the Oracle Management Repository. From this account, you can set up additional administrator accounts and set up Enterprise Manager for use in your organization.
The SYSMAN account is created automatically in the Management Repository database during the Enterprise Manager installation. You also provide a password for the SYSMAN account during the installation.
See Also:
Oracle Enterprise Manager Grid Control Installation and Basic Configuration for information about installing Enterprise Manager
If you later need to change the SYSMAN database account password, use the following procedure:
Shut down all the Oracle Management Service instances that are associated with the Management Repository.
See Also:
"Controlling the Oracle Management Service"
Change the password of the SYSMAN database account using the following SQL*Plus commands:
SQL>connect sysman/oldpassword;
SQL>alter user sysman identified by newpassword;
For each Management Service associated with the Management Repository, locate the emoms.properties configuration file.
The emoms.properties file can be found in the following directory of the Oracle Application Server Home where the Oracle Management Service is installed and deployed:
IAS_HOME/sysman/config/
Locate the following entries in the emoms.properties file:
oracle.sysman.eml.mntr.emdRepPwd=ece067ffc15edc4f
oracle.sysman.eml.mntr.emdRepPwdEncrypted=TRUE
Enter your new password in the first entry and enter FALSE in the second entry.
For example:
oracle.sysman.eml.mntr.emdRepPwd=new_password
oracle.sysman.eml.mntr.emdRepPwdEncrypted=FALSE
Save and exit the emoms.properties file and restart each Management Service associated with the Management Repository.
In the Grid Control console, click the Targets tab and then click All Targets on the sub tab.
Select the Management Services and Repository target and click Configure. Enterprise Manager displays the Monitoring Configurations page.
Enter the new password in the Repository password field and click OK.
See Also:
"Specifying New Target Monitoring Credentials"
After the Management Service has started, you can check the contents of the emoms.properties file to be sure the password you entered has been encrypted.
For example, the entries should appear as follows:
oracle.sysman.eml.mntr.emdRepPwd=ece067ffc15edc4f
oracle.sysman.eml.mntr.emdRepPwdEncrypted=TRUE -
I've had my iphone 5s since Oct. Since I've had it, it will go through these periods where the data just slows to a crawl. So slow that I can't even access the App store until I get back around wi-fi. And this is in areas that I am recieving full signal and it's indicating that I have access to 4G. My wife has the same company, but has an iphone 5 and has not been having this problem. I called the phone comany and they advised me that it's likely a hardware issue. Has anyone had a similar problem with the 5s? If so, what can I do?
As silly as it may seem, I have had success simply turning my phone completely off and then back on again. I was using an iPhone 5 on Sprint and would run into this issue a couple of times a month. I would see the data indicator on my phone switching from 3G to 1x and back again several times over a few minutes while just sitting still. This would happen regardless of whether or not I had a full strength signal or not. (Remeber that if your signal strength is below 2 bars,dots,etc, you will not get great data speeds).
Try rebooting the phone. If this does not help, pay close attention to the signal strength meter at the top of the phone. If you and your wife are on the same carrier and it turns out you get different signal strengths while standing in the same location, you may have a problem with your phones antenna.
If these suggestions do not help, post back to the discussion. -
I use an iMac 27" (mid 2011). Until recently I had OSX 10.6.8 installed, but both, the HDD and SSD had to be replaced, and I lost all the memory.
After the repair through Apple Care I had OSX 10.7.5. (Lion) installed, which developed a Magic Mouse problem.
Unlike with most users, I have no problems with connection, but grapple with a different kind of erratic behaviour.
All fancy stuff is turned off in the mouse preferences. When I try to move, open or close pages, unrelated submenus pop up and hinder the
required task. No matter how often I click, these menus stay there, and they even come up when clicking on the bare desktop.
It renders the mouse absolutely useless, as no work can be done with it.
The first 'Magic Mouse' had depleted batteries every few days, despite switching it off after use.
I was supplied a new Mouse, which does better battery-wise, but the problems are the same. I can't get a result by clicking on any link, due to
the pop-up menus, so both 'Magic Mice' are totally useless.
At present I am using the old USB mouse from my Mac Pro, and that works still o.k.
The problem are not the mice, but the software. The first 2 weeks after installation of OSX 10.7.5 the Magic Mouse worked though.
I have no idea as to what the reason may be.
Has anyone in the community ever experienced that particular problem. Any hint would be welcomed.
Thank you!Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
iPad 2 smart cover. Mine is falling apart and has marked my screen protector with black lines. Anyone else experienced this?
Mine has worked fine. What model do you have, the leather or the other? I've read of others using screen protectors like Zagg absorbing some of the dye. Of course considering the cost they are to produce ($12 is what I read for the leather) it doesn't surprise me some of the dye is coming out. I have wiped my black leather down with high grade leather cleaner / oil and you can clearly see it on the rag.
-
firefox 4 beta ended up on certain web sites grinding to a halt then stopped responding igoogle is a prime example firefox 3.6 is fine with the web site it was not doing it till the 12th beta version and its happened on two systems so im not alone its resulted in me removing firefox 4 and i will wait until its officially released
Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas? -
difficulty booking genius bar appointments on line.
It is my understanding that they're trying to get more information from you and offer other possible support options first. They probably want to cut down on unnecessary appointments by attempting to resolve simple issues online and are also trying to avoid some situations where people were booking multiple appointments for a variety of reasons.
I made one a couple of weeks ago with no problems. It was for a screen repair so it was pretty definitely not an issue that could be resolved by chat or a phone call. -
Do i have to delete and reinstall all of my apps?
See Here
https://discussions.apple.com/message/16514312#16514312 -
for months most of my itune shows were frozen noone gave me the correct info .my new brilliant boyfriend told me to try authorizing my itunes and it freaken worked! when your in ur itunes click on store (not help not advanced ) I wasted my time scroll down to authorize this computer it will ask for ur id and password etc UNFROZEN!!!!!!! I hope this helps someone!!!!
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
I just update to iOS 7 on my iPhone 4s. The calendars on my iPhone are not keeping the information on the days that should be marked. The info is there in my iCloud on my computer, just not on my phone. Has anyone else had the same problem and what can I do about it? Is it at bug in the iOS 7 update?
What do you mean by "on the days that should be marked"? Are you calendar events displayed on the wrong days?
Maybe you are looking for
-
Hello, I have problem in Report6 or Report6i, i want to print report in character mode landscape, i set all the properties related to its landscape and character mode but it still print in potrait format and i used printing definition files but it st
-
Do i get i0s.5.0 on my iphone 3gs
do i get i0s.5.0 on my iphone 3gs
-
Hi All I have a report requirement in OBIEE 11g to have guage for sales amount with three thresholds for red,green and yellow. The requirement is to have scale selector on the report which can change the % values for red,green and yellow areas. For e
-
I need to know in what format is the web in order to choose a server.
can u help me please ??
-
Using Test Stands DLL prototype adapter to call a shell interface DLL of my own creation, I have found an irritating problem with the data types loaded from my type library. Character arrays default to Category: "Array of Numbers" Type: �Signed 8-bit