TS1369 I have an ipod classic about 4/5 years old.  I lost the XP hard drive with my original itunes on, so I have a new W8 HD with a newly downloaded itunes.  However, my ipod does not show up at all, nor is it shown on my laptop.  Nothing.  Cable/USD fi

I have an ipod classic (4/5 yrs old) ,which I syced with itunes on an XP laptop, since destroyed.  I have a W8 laptop with a newly downloaded itunes, but, it will not show any trace of my ipod when connected, nor does the laptop.  The cable and usb port are both tested and fine.  Any ideas. 

Hello Ditchblow,
Congratulations on your new laptop!  I found an article with steps to address the issue you described:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • I cannot download Lightroom CC because it does not show up  on my Creative Cloud Application Manager. How do I fix this?

    I cannot download Lightroom CC because it does not show up  on my Creative Cloud Application Manager. How do I fix this?
    I have Windows 8 and am currently using the entire Adobe Suite Package for my account.

    do you have a 64 bit os?

  • I downloaded 7.0 and it does not show up on my computer

    i downloaded 7.0 and it does not show up on my computer. How do I get the music files to show up?

    A movie rented on an iPhone can only be viewed on an iPhone. If you want to view on TV you need to rent directly on ATV or via computer (and stream using home-sharing)

  • When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

    When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

    It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
    I'm not sure if anyone else has this trouble, but it is a bit of a pain!

  • My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

    My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

    Hi,
    Time to take your iPod in for service.
    You can make a Genius Bar reservation in advance if you are in the U.S.
    http://www.apple.com/retail/geniusbar/
    Carolyn 

  • HT204266 I downloaded an app and it does not show up as an icon to open the app. I went to download it again and it says "installed"

    I downloaded an app from my Ipod touch and it does not show up as an icon to open the app.  I went to reinstall the app and it says "installed"  How do I find the app so I can use it?

    Try using the Spotlight search on the iPod to try to find the app. It is likely that you just can't find it.

  • Successfully downloaded os x lion, but does not show as installed

    Bought and successively downloaded os x lion on my Mac, but does not show as installed

    That's one of the confusing things about the App store.  The app you purchase there is the Installer.
    If you've successfully run the installer then your Mac is on Lion but the last step of the install proceedure deletes the Installer from your apps directory.  The App store then reflects that the Installer is not installed on the system..  which is true.
    You can redownload the installer from the app store if needed.  If the installer is still in the Apps directory then you probably haven't installed Lion yet, just downloaded it.
    Regards,
    Captfred

  • Data in Health first got doubled and then does not show anything at all

    Hello together,
    i'm experiencing issues with the health app.
    Until yesterday all the data, like distance, steps, weight, was perfectly right collected and shown within health.
    Yesterday i went for a run and installed Runtastic and 'Runtastic Me' afterwards. First of all i checked, that both new apps were not allowed to write distance or steps, but to read them.
    Nevertheless the distance of my run got doubled in health. Since today health does not show any data at all, but Withings (which i had installed before and worked fine) an Runtastic Me show the data right. In health i cannot select Iphone 6 as data source, which i was able to do before.
    How can i fix this?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />
    Your plugins list shows outdated plugin(s) with known security and stability risks.
    * Shockwave Flash 10.0 r32
    * Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • I have a late 2012 iMac running osx 10.8.5.  I keep losing access to my internal hard drive.  I can reboot and regain access and it will last for a few minutes or hours.  Disk utility does not seems to help.

    I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive.  I keep losing access to the internal hard drive/startup disk.
    I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive.  The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal.  Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing).  It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

    You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

  • Newly Created Folder Under My Folders Does Not show Up in Answers

    I created a new folder in My Folders using "Manage Catalog". It shows up in the Manage Catalog window but does not appear in Answers even after I refreshed the display. I've successfully created folders in the past, but this suddenly stopped working. The only thing that I had done was rename the Subject Area in the Administration tool. Does anyone have any insight as to why folders created does not show up under My Folder. However, I am able to create folders under Shared Folders.
    Thanks in advance.

    Hi user9213142,
    Just as an FYI, it's customary to award "Correct" points to Ashok for his assistance and setting your question to "Answered" so that other users can benefit from the help.
    Best regards,
    -Joe

  • When ever I take a photo from my iPhone 5s and changes their effect. But I does not show any effect in my computer when i connect to laptop. Please suggest me its solution.

    When ever I click a photo with photo effect. Photo effect shows only in my iphone but it does not show in computer when ever I connect to laptop. So please resolve the problem.

    That is how it works. You will need to email the photo to yourself in order to preserve the edits.

  • My Mac is telling me that my disk is full. I have bought an external hard drive and have just listened to a youtube tutorial on how to move iTunes library to the external hard drive. If I do this can I still load new media on my Mac without the external?

    my Mac is telling me that my disk is full. I have bought an external hard drive and watched a youtube tutorial on moving iTunes library to external hard drive. Will I still be able to use iTunes on my Mac for new media or will this now only work through my external hard drive?

    To do this you need to learn the details of how iTunes works.  For example, you just said, "leave my iTunes on my computer".  iTunes is the application itself so of course it has to be on your computer.  That said, I therefore don't know what you mean when you say leave iTunes on your computer.  The phrasing of your question suggests to me, if I may be frank, you don't understand how iTunes works fully and we can't just give you a "do this" answer and have it work out.  It would be too easy to make a mess of things.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    Yes, you can download media and delete it again (but if it is from the iTunes Store there is the possibility you can't always download it again).  Of course if you want to keep a copy you can archive it.  I have done that with some files for which I have no room on my computer.  I transfer them to an external hard drive and delete the reference to the file (but not the file itself) from my library.  If I want a quick listen I go to the file on the drive and use Quicktime player or something else non-iTunes so I don't have to have it added to iTunes and delete again.  I don't know if that is the solution you are looking for.  I could leave the reference in iTunes but if the file can't be located by iTunes it will tell me there is a broken link = !  I guess I could live with that except I periodically scan my library for broken links and don't want it getting confused with ones I have done deliberately and ones suggesting I am really missing a file somewhere.
    Another possibility is to make a second iTunes library for material you are archiving and only use that library when the computer is using the external drive.  There are tricky aspects to dong that but it is a possibility too.
    The simple solution for most people with computers with tiny drives (as most seem to be these days) is to put their whole iTunes library on an external drive and use it from there.

  • Itunes 11 appears to download my CD but it does not show up in my music?

    I insert my own CD. itunes goes through the importing process on each track, but when it is done, the new tracks do not show up in Music or Recently added.  Where is it?  I do not have itunes Match.  Any ideas?  I import my own CD's like this all the time.

    I had the same issue and it seems to me, that the problem is the Apple cloud. The cloud symbol next to my music library wash showing an update after I imported a new CD.  And only after this was done (which took a loooong time over my slow DSL line), the CD was visible.
    Although I do not use iTunes Match it looks as if Apple is transferring my music library data to the cloud.
    Best regards
    Konstantin

  • CR2011 Dynamic Parameter does not show list at all

    I am upgrading some Crystal Reports from CR 8.5 to 2011.  Some would be better served by using a dynamic parameter to allow the user to select the data for the parameter from the database information.  I have created a dynamic parameter on the Customer ID and set the description to be the customer name.  I have set it to handle multiple values.
    When I preview the report in the Crystal designer, I get a text box to type in but not a drop down.  To be clear, I am not talking about the LOV 1000 limit here.  There are only 50 customers in the sample file I am working with.  I tried turning the static parameter into a dynamic one, I deleted the original parameter and created a new one.
    In case it matters, the parameter is only used as part of the selection formula and if I enter a proper customer id, it will retrieve the data.  This report has about 7 tables (no stored procedures or views) and a subreport of two tables that is linked to the main report on the customer id.  The parameter is only used on the main report for record selection.  The SQL statement in the main report and subreport did need to be reset when I first opened the report in CR2011 but I did that on both.  I have verified the database and the option to verify on first refresh is checked.  The original parameter did have an imported list of about 3000 customer names.  I tried exporting the CR template to a new file and while the file size changed, the behaviour did not.
    When I create a brand new report on two of the tables, including the same customer table, and create the parameter the same way, it shows me the list properly in a dropdown at the prompt stage.
    I am not sure where to go here or what else to try.  If anyone has any suggestions, I appreciate the help. TIA, rasinc

    Thank for the reply Dell,
    I see the logic in adding the extra table and keeping it unlinked and I do know the crazy data that can come up if I use it linked to other tables or use the fields in other parts of the programming.
    However, I've now tried it several times, creating the parameter on just the name alone, with the ID alone, etc. and I still only get a text box to type into.
    I have made sure the original selection criteria
    {customer.Id} = {?Customer}
    if from the original table, not the new one, which I assume you expected me to do.
    So I decided to run the same report through CR XIR2.  When I update the Set Datasource Location, I am now getting the message
    "Invalid Argument provided.
    Details: The alias requested 'company', contains a combination of characters which is not considered to be valid"
    Company is a table containing information about the main company, not the customers.  The same message pops up for another table as well.
    Then I get a message that says:
    "Prompting failed with the following error message: 'List of Values failure: fail to get values. [Cause of error: The table company does not exist in the document.]'
    Error source: prompt.dll Error code: 0x8004380D"
    This appears to be a database access issue but I know the firewalls are not a problem because I can create a new report and get the LOV properly with the same database and same desktop computer.  I can take that report created in CR2011 and use it in CRXI also and get the proper LOV.  Is it possible I am dealing with template corruption because there were so many items imported into the static list before?

  • Idoc to flat file using Integration process does not show up at all

    Hello All,
    I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
    However when I send the IDOC from SAP then the Integration Process scenario just does not work.
    I Checked SXMB_MONI  There is no entry for the Integration Process.I can see entry for other without Integration Process.
    SXI_CACHE : I can see my Integration Process active
    SWEQADM :  I have activated the Event Queue and Background job
    SWF_XI_ADM_BPE :  ALL BPE is showing green status.
    All syntax check on IP are fine.
    There is no Basis Help for me so  there could be some additional basis steps which need to be configured.  Has anyone faced such an issue with Integration Process?
    Regards
    Prashanta

    Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
    <b>1<b>. let us split the scenario into two</b>.</b>
    a. <b>Sender to BPM</b> ( Integration Process).
    b. <b>BPM to Receiver</b>.
    <b>2. First let us configure the first Sender to BPM.</b>
    a. Sender Agreement( <b>Not required</b> ).
    b. Receiver Agreement( <b>NOT Required</b>).
    c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(<b>Integration Process</b>).
    d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
    <b>3. Now let us configure the Second BPM to Receiver.</b>
    a. Sender Agreement( <b>NOT Required</b>)
    b. Receiver Agreement( Sender Service(<b>Integration process</b>), Receiver Abstarct Interface,Receiver service, Inbound Interface).
    c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
    d. Interface Determination( Inbound Interface, Message Mapping(<b>NOT Required</b>)).
    So Finally we have <b>One Receiver Agreement</b>, <b>Two Receiver Determinations</b>, <b>Two Interface Determinations</b>.
    Please let me know if you have any more queries.
    Regards
    Gopi

Maybe you are looking for