TS1369 IMy I-Phone doesn't SHOW in TUNES

Hello people,
I SOLVED this stupid issue...
For several weeks I had the same problem... I tried many things but none worked... then...look what I did and FIXED it...
I know you will all say ..hey I did that too..but wait..patience...
- Uninstall ITUNES and Apple Mobile Device Support
- Reinstall ITUNES
restart your pc/laptop...
Plug  your IPHONE / IPAD / IPOD into a USB port... BE CAREFUL.. When the Windows recognizes your devices it will start automatically install the driver...HURRY UP..Click the DRIVER SFTWARE INSTALLATION ICON  on the tray ( it is next to the TIME on Windows Taskbar...) and...
IMMEDIATELY CLICK  "SKIP OBTAINING DRIVER SOFTWARE FROM WINDOWS UPDATE"...
TADA...Then your DEVICE will be installed with the PROPER DRIVERS that ITUNES INSTALL... and will appear as APPLE MOBILE DEVICE SUPPORT in the Device Manager...
Now you can OPEN your ITUNES...and YOU WILL SEE YOUR DEVICE 100%..!
YOU ARE WELCOME... HAPPY NEW YEAR 2014...!

http://support.apple.com/kb/TS1591

Similar Messages

  • HT4623 By accident i removed the charger while updating and now my iPhone shows me connect to iTunes and i am but my Phone doesn't show Help :(

    By accident i removed the charger while updating and now my iPhone shows me connect to iTunes and i am but my Phone doesn't show Help

    You need to restore the iPhone via recovery mode. To do this follow the link below to guide you:
    http://support.apple.com/kb/HT1808
    Because you need to restore to factory settings all data on the iPhone will be erased. Because the iPhone was never backed up most of the data you won't be able to get back.

  • After Alcatel OS update from v1.0.1 to v1.1.0.0, the phone doesn`t show phonebook names for incoming/missing calls!

    Hi! I have very unpleasant problem with my phones after legal OS update! After Alcatel OT Fire OS update from v1.0.1 to v1.1.0.0, the phone stops to show contacts names and pics for incoming calls and names for missing calls from phonebook. Before update, everything worked just fine! People from Telenor Serbia obviously hadn`t solution for this problem. They send me a request to send them a phones (yes two phones with same problem), but I got a phones back with unsolved problem! Also in the datas about phone, OS, e.t.c, the phone number doesn`t exist any more, just blank field. If means something, the phones are with different hardware revisions, 11 and 12! Any solution for this problem?! Thanks!

    Hello,
    After reading the information provided about your issue I suggest a soft reset of the phone.
    #Take the back cover of the phone off.
    #Take the battery out.
    #Take the SIM card and microSD card out (if applicable).
    #Wait 10 seconds.
    #Put the SIM card and microSD card back in (if applicable).
    #Put the battery back in.
    #Put the back cover back on.
    #Turn the device on.
    #Check if the issue you were having is still present.
    Please report back to us if this solved your problem!
    Thank you

  • SPA IP phones doesn't show calling number after the call was picked UP

    Hello,
       Our different CISCO SPA IP phones models (at this time we are using 7.4.8a version) are working with Broadsoft AS. And now we have a problem: when CISCO SPA IP PHONE pickups the call ( by pressing BLF lamp) and the call is connected, Cisco user doesn't see any information (calling name or calling number) with whom he is talking now. He on only sees on screen pickup extension *11 and info that the call is connected. From SIP traces I can see this information in PAI header in SIP 200 OK  message (when pickup was initiated).
      I also tried to change Caller ID Header - no luck. I've upgraded IP phone to latest version (7.5.1a)  - didn't help.
    I've experience with THOMSON and MGC. By pressing BLF , Thomson displays info who (calling number) is calling to your configured BLF line and gives you actions: retrieve this call or cancel - you can choose if you still want pickup this call.
    So can you give me some hints how to fix this issue? Our at this time CISCO IP PHONE doesn't have such feature?
    Thanks in advance,
    Giedrius

    Why not answer?
    bug is available from firmware 7-4-7 and above and are still
    on models SPA50x and SPA525

  • Phone doesn't show up on itunes

    My iphone doesn't show  up on itunes when I plug it into the computer. I do have the newest version,

    What is your computer OS?

  • How come the ipod  on my phone doesn't show the songs I loaded onto it?

    Just got the iphone 4, loaded some apps, synched it up to my computer and loaded a couple of movies on as well, just for fun. When I open ipod on my phone, there's nothing there. It suggests I go to itunes to find songs. I plugged the phone back into my computer, and there was all the music I loaded, showing that it is on the phone and is using up memory space. How come I can't listen to it? Am I doing something wrong?

    Hello....
    Connect your iPhone to your PC. Launch iTunes. Select your iPhone under Devices on the left side of the iTunes window. Then select Music from the menu.
    Make sure *Sync Music* is selected then click Sync tab bottom right side of the iTunes window.
    If that doesn't help, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    More help available here. iPhone Support / Syncing
    Carolyn
    Message was edited by: Carolyn Samit

  • New phone doesn't show all contacts in address book.

    Hi,
    I just acquired a Blackberry Curve 8310, previous phone is a Razr. I put the sim card into the blackberry, then went to "import contacts from sim card." Upon doing this, some of my contacts showed up, not all of them. Is there a step I missed, am I doing something wrong?
    Thanks,
    Emil

    okay.
    so my bet is :
    back when you used your Motorola, some of your contacts were stored on the SIM card (and you have them on your device now)
    and some of your contacts were stored on the internal memory of your Mototorola.
    you have to either use the Motorola PC suite to transfer your contacts t your PC, or putthe SIM back on the Motorola and copy the contacts from the Motorola memory tothe SIM card.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Phone doesn't show up after new software update

    After dowloading the new software I am unable to see my phone when connected to the computer. I'd like to transfer music and pictures but now I can't. Any idea how to get my phone to show back up in iTunes?

    First, click your Apple menu icon top left in your screen then click Software Update...
    If the system is up to date, try reinstalling the AMDS...
    iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X'
    And if you have anti virus software installed, disable that before connecting the iPod to your Mac.

  • HT4972 My phone doesn't show up in itunes or in my computer. I have tried every suggestion currently listed on this forum. My phone is basically worthless.

    I can't get my phone to show up on any of my 4 computers. Used 3 different cables. Tried every suggestion on apple support site.

    Ok, so its been a while since I posted anything on here. That's pretty much been because I've been too busy and didn't have time to do anything to sort out my problems with my ipod.
    I did as suggested and ran full system scans for viruses, adware and spyware. There was nothing major wrong with my PC. I also tried to format my ipod through the disk management part of the device manager window, after taking a long time to recognise the ipod and try to format it (8 hours) it got to around 70% before failing. So I though I was doomed to bin the ipod.
    However I tried again today, to connect to my PC and the ipod had run out of charge completely and displayed pretty much every unhappy icon possible: the sad ipod, the folder and exclamation, and the dead battery. So I plugged the ipod in for a few hours while I went out, and when I came back it was fully charged. From here I had no problem putting the ipod into disk mode and connecting to the PC. This time I could access the ipod as normal through the my computer window and simply told it to do a full format. This completed in less than half an hour, restored the ipod to factory setting and am currently waiting for itunes to put around 3,000 songs onto the ipod.
    I have no explaination for why the problem has been solved save to say that running the battery down completely may have done the trick. Sorry this has been such a long post but I am very happy right now (saving £200 on a new ipod). I never even had to reinstall the itunes from my original CD version.
    Lastly, a big thank you to all the people who offered their advice.
    Gav
      Windows XP  

  • HT4623 My phone doesn't show software update mode. Why?

    I have I phone 4. Want to upgrade to IOS6. When I go to general. It does not show me any upgrade button to install. Why?

    Welcome to the Apple Support Communities
    It only appears on iOS 5 or newer. Connect your iPhone to the PC or Mac and iTunes will ask you to update to the most recent version

  • Changed apple ID...phone doesn't show the change

    I just changed my Apple ID to my new email address. My IPhone app for ITunes still shows the old one and will not accept the new one...says "that ID is already in use"....yeah, by me...any suggestions?

    Have you logged out of the old ID in settings/itunes & app store?  Tap on the ID there log out and log in with the new ID

  • Sprint phone doesn't show service so it can be programmed on Yemen mobile?

    Any help please don't be shy post please!!

    The Sprint iPhone 4 is a pure CDMA phone. It can not be used on any carrier other than Sprint. If you want to use a foreign carrier, you bought the wrong phone.

  • HT1947 Home sharing doesn't work. I tried all the items in the troubleshooting section. It just sits there and says turn on home sharing in itunes in the remote app. It's on. Connecting to a library doesn't work either because my phone doesn't show up on

    Iphone 5. Anything else I can try? Itunes and iphone and the app are all up to date.

    I brought my macbook air at home, everything worked perfectly: iPhone, iPad and Apple TV can connect. So basically I guessed that the issue was coming from the iMac, something preventing it to be discovered. I've checked the bonjour broadcasting and oh, surprise, the iMac wasn't broadcasting... Weird because it's a setup from a Time Machine, the environment I am running currently on the macbook air.
    Anyway, if this can help someone else:
    I've ran:
    ps aux | grep mDNS
    and saw that for the iMac the daemon was launched with the argument -NoMulticastAdvertisements.
    I've setup the daemon to run back as normal and restarted the computer:
    sudo defaults write /System/Library/LaunchDaemons/com.apple.mDNSResponder ProgramArguments -array /usr/sbin/mDNSResponder -launchd
    After the reboot, everything works flawlessly (it has never worked before for the 6 months I had the Apple TV).
    Also interesting discovery and I think it's new because I don't remember being able to do that before, but some of my devices are on the separate 5Ghz network, some are on the 2.4Ghz and they can still all communicate flawlessly. I can use AirPlay on the Export Express that is on the 2.4 from the iMac that is on the 5Ghz, and I can access the iMac library from whatever band. Pretty nice!

  • My phone doesn't show up in itunes but on my computer it comes up., my phone doesn't show up in itunes but on my computer it comes up.

    i need to be able to connct my ohone with my itunes account its not connecting with itunes but is hooked up with my computer.

    Hey jacklyn259,
    To resolve that issue, run through the troubleshooting steps in this link:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • Music in itunes music folder that doesn't show in tunes?

    I have downloaded music and put it in my itunes music folder, but it doesn't automatically show in itunes application until I double click the selected track whilst in the itunes music folder. Is it possible to have the itunes automatically display all music when it is put into the itunes music folder?

    Hi,
    See http://support.apple.com/kb/ht3832
    Jim

Maybe you are looking for

  • Web gallery still not working.

    The web gallery feature is still non-functional. I used to use it all the time. Suddenly a few days ago I noticed that it simply does not work anymore. I highlight and event, click web gallery, it creates a web gallery in the left sidebar of iphoto.

  • Cover Flow & Album by Artist / Album by Year

    I've been playing with V7 for a few hours now and Cover Flow seems pretty good. I generally don't like to mess with the sort order of my 15,000 odd database: I like things to be: sorted by Artist, and within artist by album (either alphabetically or

  • Can AS know if an desktop icon already exists in a location

    this code moves a file on the desktop to a specific location. tell application "Finder" set desktop position of alias "Macintosh HD:Users:Shawn:Desktop:The Matrix Effect - Video.webloc" to {1800, 1000} end tell Can you ask Applescript if an icon is a

  • Generating the interaction diagrams from java

    Hi All, I am making a program, in which I should be able to push in a bean and when I perform some operation on that bean I should be able to generate the list of all the classes which were used for that purpose. It is something like generating the i

  • Leica M8 File Support Gone?

    I've been using Aperture on my new iMac for a couple of weeks now with my Leica M8 - all was working wonderfully until today when I imported a card of M8 images into Aperture and all I get is the "red screen of death" telling me the file format for m