TS1369 iphone showing blue itunes logo with usb cable
after copying recent purchases from iphone 4s and
updating itunes software
iphone not showing in devices in itunes but
it does showing in Windows 7.
Iphone shows blue itunes logo with usb cable.
Hi there gdavis433,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
-Griff W.
Similar Messages
-
I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
I had a itunes logo with usb cable ? can anybody help me
i was updating my ipad into 7.0.3 but my ipad has a problem with wifi, because if this problem the network was disconnected then i press home and sleep button
then it bring a itunes logo with usb cable
is i need to format my ipad ? it contains a important thingsIf the Apple Mobile Device driver is not the problem or you need more help see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you come back with the wording of the error mesage we can probably provide more specific recommendations. -
upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart
Hi there emynona,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
The first thing happened was an apple logo blinking on and off. tried pressing home and power button together then now it shows an iTunes logo and usb cord. Please help me!
shut down the phone first.
hold the Home button and then connect it to iTunes, keep pressing the home key till the time you see a message on iTunes saying 'itunes has detected a device in recovery mode' click ok a,release home key and click on Restore -
My iphone shows an itunes logo with a usb cable
my iphien 5s is showing me an itunes logo with an usb cable
i tried to connected to itunes but nothis happen
i pressed and holed the power button while i connect it and nothin happened
i pressed and held the sleep/wake button and the home button and nothin happend
i tried every thing but nothin changed what can i do??Youll need to restore your Device, Click here for more infro
-
I just tried updating the most recent software on my 3GS (on my Mac) but it said the updated on my phone failed. Now my phone is frozen and only showing the itunes logo and USB cable. When I connect to the USB lead, its says: iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
Have I lost all the data on my phone?
What should I do?
Help!
MThe iTunes logo and cable indicates that your iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
For the 3004 error code does the troubleshooting for it on the page that you posted from not help ? -
Good day, please help do a manual reset on my iphone 4s. I was updating my itunes and all a sudden i discover the USB cord disconnected while updating which later show me itunes logo with the USB cord charger display since yesterday. Help me gain access back to my iphone 4s so it can start working effectively . Thanks.
http://support.apple.com/kb/ht1808
-
Iphone while getting On showing itunes logo with usb connection
Dear Sir,
I was upaditng my iphone 4s for from IOS 5.1.1 to IOS 6.1.2 by connecting with a personnel hotspot wifi connection. While doing this my iphone got switch OFF and then automatically got ON and the showing " Itunes logo with usb connection with up arrow".
Also i tried to switch OFF and ON 2 to 3 times but still showing same.
Can you please assist me , what i have to do now, to get my Iphone ON as normal like before.
Awaiting for your quick response,
Thanks and Regards,
Vishal Haswani.
<Personal Information Edited By Host>Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode:
You may need to try this More than Once...
Be sure to Follow ALL the Steps.. -
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
HT201412 My iPad turns on but it shows an iTunes logo with a USB, why?
I recently updated my iOS and when it finished, it turned back on, only to show the iTunes logo with a USB. I connected it to my computer and restored it still doesn't work and continues to show the image
Try forcing it into recovery mode if you can't restore the conventional way.
You can read about it here.
http://support.apple.com/kb/ht4097
But this is how it goes ....
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
while opening my iphone 4 it shows itunes logo and usb cable and stucks there, while opening my iphone 4 it shows itunes logo and usb cable and stucks there
It's in recovery mode. Plug it into your computer running iTunes and restore it.
-
HT201412 it shows itunes logo and usb cable with arrow after that it switch off itself
iPAD shows itunes logo and usb cable with arrow after that it switch off itself
If the Restore doesn't work, force your iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
G3S Phone was disconnected during upgrade the os 5. After a restart it Now shows a picture of the Itunes logo with a cable underneath.
How do I fix this problem?If you have a pass code lock on your phone try unlocking it prior to connecting it to your computer.
-
After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing. What has happened? What do I do to get by this. I can not shut the iPad down at all.
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
Adobe air 3.2.0 android - custom uri issue
Custom URIs are no longer registered/handled by the adobe air wrapper on android devices. Tested on evo4g with android 2.3.5 and galaxy tab with android 3.2. How to reproduce: create your apk with adt having these settings in your application.xml /
-
Bought a Macbook Pro through education store - 3 year warranty? where?
Hey, Bought my Macbook Pro through the educational discount & wasn't supplied with anything in writing or on the invoice stating that it was supplied with a 3 year warranty. How do I get this proof from apple? Thanks
-
Quick question about iDVD 4 ...
When burning a DVD, is the maximum length of time I can make my video 1 hour long or 90 minutes long?? I keep forgetting this ... THANXX!! Ryan
-
After Effects CC and Premiere Pro CC don't play well together on new Mac Pros
Would love some insight from folks on this. We have welcomed 2 new mac pros w dual D700's into our edit suites and have found an issue we need some help finding a work around for. With Creative Cloud we're used to rendering a large amount of graphi
-
Related to my previous post, that no-one has replied to... I have decided to recreate the gradients in Freehand. However I'm finding it hard to get fine control using the gradient creation strip in the object inspector pallette. I need to be able to