TS1369 my i pod is not recognized by computer or in i tunes for windows

My i pod touch does not appear under devices in i tune nor is it recognized in my computer

Try Here > http://support.apple.com/kb/TS1538

Similar Messages

I pod shuffle not recognized by computer

JUst got shuffle...computer says not recognized????? Help

when you have a windows:
1 open iTunes
2 connect iPod
3 open explorer
4 serach the usb ports about the ipod click on them
5 ipod is connected
when ipod is not connected move the power button on the shuffle and press some buttons
i hope i could help you

TS1369 my i pod is not recognized by my pc, but is by my mac?

I bought a used Ipod nano and can use it on my Mac, but my PC won't recognize it at all??

Try Here > http://support.apple.com/kb/TS1538

TS1410 I pod Classic not recognized? What can I do?

I pod is not recognized. What can I do?

missanoshka,
if you select the MacOSXUpdCombo10.7.5.dmg file which you’d downloaded, and press ⌘i to Get Info on it, what information is shown for it under ▼ General: Size? My initial guess is that you could have an incomplete download of that file.

Ipod touch not recognized by computer or ITunes

Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Ipod Nano not recognized by computer (or itunes) but charging.. so connected

worked until this am (though I think I had this once before, a couple years ago, too often follows itunes updates)
connected to computer (win 7) this morning and it is not recognized by computer (or itunes)
can't find it looking in Explorer
but, it is charging so... it is connected
have tried everything except re-installing itunes... if the computer is not seeing it, and it shows the connection when itunes isn't open...
would that make any difference?

diagnostic shows....
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: Y(I removed info)
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
it looks like everything is fine, except it can't find the ipod... why?
when I plug in a thumb drive, it recognizes that, why not the ipod?

Ipod not recognized by computer or self

Ipod touch shows the apple screen but will not start, I did the hold power button then hold home button etc didnt work. the apple does stay on screen and flashes here and there but still no changes. Also, is not recognized on computer. Help??

sounds like a currupted iPod if its stuck like that or you Jailbreaked it.

My ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

IPOD Shuffle not recognized by computer, and caused a USB power surge

Device is not recognized by computer, and I tried the listed support recommendations.
The problem originated when I plugged the IPOD shuffle directly into the computer USB ( not using a hub), and this caused a warning window to appear saying unknown device has caused a power surge to this port, and most be removed. Prior to this event, the IPOD shuffle has worked (with direct contact with computer usb or through a powered highspeed usb hub) without issue for nearly 1 year. Any taker's on this issue? Thanks.

Hi JBR,
Go to your control panel and click on Install/Uninstall programs. Scroll down and see if you have multiple versions of the ipod updater installed on your computer. If you do, then uninstall both versions. Reboot your computer.
Next, go to the downloads page and download/install the 1-10-2006 ipod updater. Once installed, go to your start programs and select ipod updater from there. Plug in your ipod and wait a moment. If it's like mine, it'll recognize your ipod and then you can do a "restore" for a clean format.
After that, open itunes and life should be good.
Hope this helps!

Curve not recognized by computer

hello, i baught a blackberry curve on ebay (big mistake!) it functions as phone, but is not recognized by computer. when i plug it in via USB it connects for a second and then stops, i.e. synchronization is not possible.
i reset the device, reinstalled the DM software, spent hours trying to solve this issue nothing works - any help?
btw, under 'manage connecetions', USB does not appear at all.
thank you so much for any input

prior to doing anything, you need to install the USB drivers.
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
after you have checked everything is okay, you can do the next step, that is install the Desktop Manager.
Moreover, ou can wipe your device so that there is no remains from the previous owner.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Charging icon appears but not recognized by computer help!!!

Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
What's going on???
HELP!!!!

Have you tried a different cable?
This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
MJ

My Photoshop Elements serial number is not working? The CD says it is for Windows XP/ WIndows VISTA...and my currest OS is Windows 7? Is that the issue

My Photoshop Elements serial number is not working? The CD says it is for Windows XP/ WIndows VISTA...and my currest OS is Windows 7? Is that the issue?

This is a question for the Photoshop Elements forum: Photoshop Elements. A moderator may find and move this to the correct forum for you.
Benjamin

Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

Edit ---> referance -----> general ------> language

I just downloaded the latest software OS X on my mac book pro, now whenever I start my computer I have to wait for windows mac to open up. The open at login is not even checked. How can I stop this from happening?

I have a Mac Book Pro and downloaded the latest software OS X. Now whenever I start my computer, I have to wait for Windows Mac to do its thing. I checked and the "open at login" option is not checked. How can I turn this feature off? It's driving me nuts!!

All fixed Barry. When I went to restart my computer, the question was right there. Do you want to open Windows when opening. NOPE!!
I tried it a few times and thank goodness it worked. Thank you for your help today.
Best,
Michelle

Add Folder to Library option is not available in the latest version of iTunes for Windows. I am using Windows 7 64 bit. Any suggestion ?

Add Folder to Library option is not available in the latest version of iTunes for Windows. I am using Windows 7 64 bit. Any suggestion ?

CTRL + B will bring up the menu bar, on which is File/Add Folder...

TS1369 my i pod is not recognized by computer or in i tunes for windows

Similar Messages

Maybe you are looking for