TS1369 My IPad is now showing as not Synching to Itunes, although it has done in the past no problrm.
Cannot get my IPad to snch to ITunes on my Computer, Not had a probelm previously.
Have gone into help and it is shown as not connected.
The track is probably corrupted in some way so won't play. This has happened to me and I just deleted the track and redownloaded (should be free if youve already paid for it... but check that you can do this before deleting it). This should help...
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If this doesn't work then report it to ITunes.
Similar Messages
-
ipad 2 not recobnized by itunes, even though it has done so previously. tried all tips provided by online Apple support. any ideas.
Well I finally had enough and completely re-installed WIndows 8. Initially this had no effect, but then I started getting error code '0x8000084 - unable to connect to iphone' which I took as a positive because at least now it was spotting there was a device even if it couldn't connect to it.
Going through the same steps as above I plugged the iPad into one of the USB3 ports on my PC and as if by magic, the iPad popped up and, as I write this, is happily syncing.
I'm running with a new i7 Ivybridge motherboard, I guess there must be some driver issues with the USB2 ports, hopefully rectified soon. -
My ipod recenly froze with the last update. bestbuy gave me a replacement. the new one will not connect to the computer or itunes. i followed all the instructions and - nothing. It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes. i don't get it. i'm not a supertech so i don't know what to do. help!!!!!!
Thanks, Bob! You are correct. And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE). One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind. Only with the Security Mode set to DISABLED, could we gain access.
2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers. Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them! -
my ipad will not connect to yahoo or aol mail, anymore. my mother is having the same problem and also a cousin, in a different state. my cousin and i upgraded to ios 6 and my mother did not. i do not understand why this is happening.
I should add that i have also done:
- reset (holding two buttons)
- updated software to latest IOS
- done a full restore to original settings
None of this has solved the problem. -
My ipad will not appear in itunes and i have done all the troubleshooting
I cannot get my itunes to accept my ipad. I am also having trouble with my ipad recognizing a camara kit sim card.
Bubbanole-
One thing to try is to uninstall and re-install iTunes.
The only other thing I can think of, is that your cable may have become defective. Do you have another computer with iTunes you can compare with?
Fred -
iphoto has stopped transferring my photos from my Nikno coolpix s7c camera. Seems like it stopped when I upgraded to Lion? It continues to work with a PC?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?
a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac. -
I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting" as well as "unable to verify". How can this be sorted? Thanks
Hi,
Thanks.
I have tried signing out and in, still does not work.
Still just get the previously mentioned "messages".
I wanted to restore, but then you have to turn off "find my ipad/iphone" but this is not allowed, as I cannot connect to the itunes/icloud or app store. The units work with current apps. EG; email etc, and with apps that do not require current updates.
Thanks -
I downloaded and installed the latest update on my Ipad and now it will not power on. It shows I tunes and a power cord. What should I do?
Hey kfortnt2,
Thanks for the question. I understand you are experiencing issues after updating your iPad. The following resource outlines the screen you are seeing, and a potential resolution:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I have purchased songs from itunes on my ipad but now they are not there anymore. How can they get them back? Dont come up in songs not on this ipad and in itunes it asks to buy again
If you are now in the US then you can only use the US store, so you should update the address on your account
Changing country : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account.
Had you copied the songs over to your computer's iTunes library, do they show in the Music section on it ? You can copy purchases that you still have on your iPad over to your computer's iTunes library via the File > Devices > Transfer Purchases menu option -
My USB charger is not supporting while i am connecting from PC to iPad for charging (showing as " Not Charging"), Kindly advice me
Hi Folks,
I have tried most of what have been said here ( thank you for the great Job) but unforunatally it didn't solve the issue.
However, now the "Not Charging" message in the right corner disappeared and my iPad is charging normally from my laptop.
The reason behind that is using the USB3.0 port in my Dell inspiron N5110. Earlier, I was using the USB 2.0 ports and that is why it was showing that message but as sooon as I pluged it in the eSATA USB 3.0 port , the message disapeared and the iPad started charging normally.
So don't waste ur time here and there try to plug it to USB 3.0 port and it will works, Insha ALLAH.
Cheers
KoRn -
on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
i cant see menu page on display screenhttp://support.apple.com/kb/HT1808
-
I have used the same Apple ID on my children's iPads. Both iPads are now showing as the same. How do I get the missing account back?
You can clear the iPad and start again with the other account> Settings->General->Reset->Erase all Content & Settings
Or you can go to Settings->Itunes and App Stores->Apple ID->Sign Out,
And Then Sign in with the other account. You can then download the Apps with that account. Though you may block the other account for 90 days.
Your best bet is to set it up again using the orighinal account it had, so you can get their Apps back. without affecting your account. -
I had this problem: "cannot connect to itunes" while trying to download an app so i went to the settings and i kinda messed it up that now i have not apps or itunes icon on my ipad! can anyone help me?
First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
I downloaded the last update on my iPad and now I can not download from the apple store or iTunes. I just sits there and continues to act like it will but nothing happens. And then it times out and goes back to home screen. Have a 32 so have have plenty of room.
What would you advice I do? I purchased this iPad in dec 2013.Double tap your home button to bring up the most recently used apps.
You'll see the app icon below and a screen shot of the app page above.
With your finger swipe the app page above the app icon upwards to fully close the apps (you should do this regularly).
Now, reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any data or settings.
When your iPad comes back up, see if you can download again.
Maybe you are looking for
-
The attempt to burn a disc failed. An Unknown error occurred
"The attempt to burn a disc failed. An Unknown error occurred (4450)" This is the error message I get when I try to burn a CD. This PC IS authorized. These files have not been burned before. This is a new Dell Dimension 9100 DVD/RW I've burned CDs su
-
Hi, I have a few pdf documents that I'd like to embed (currently doing that via Advanced Actions) into my Captivate project. It works fine for me, but when I shared the project (as an .exe file) with a co-worker, he was unable to view the pdf; nothin
-
Since I installed the latest version of iTunes I have been unable to sync new downloads to my ipod. Prior to this installation I would get 2 windows when I attached my ipod but now there is only one. The software does not recognise the device (I trie
-
Is it possible to set character set at instance level?
hi all, I have some confusion. say my database character set is AL32UTF8. and i want tio set charcter set of instance is WE8MSWIN1252 Is it passible to set character set at instance level? Please reply with yes or No or why? Thanks & Regards,
-
Archiving/deletion of material master record from Plant
Hi Experts, I have 50000 materials in 0001 Plnat and recently created a new plant 0002. I transfered 2000 materials from 0001 to 0002. In this scenario when I run a report in Plant 0001, all the 5000 materials are appearing, which i dont want to see