TS1369 My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What's wrong?

My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?

Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable?  It might not also hurt to connect it to another USB port as well.
Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
Putting iPod into Disk Mode
B-rock

Similar Messages

  • Device button no longer appears in iTunes after connecting with USB cable

    Since updating software to OUS 7.0.4 my device buttton no longer appears in the iTunes window after connecting with USB cable

    Problem solved. I needed to reinstall my Apple Mobile Driver.  I found the solution on this web site.
    iOS: Device not recognized in iTunes for Windows http://support.apple.com/kb/YS1538
    After I reinstalled the driver, my iPohne immediately synchronized with my computer. 

  • Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

    iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro    

    Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

  • Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Why is atv slow to buffer after connecting with cat5 cable

    Why is atv slow to buffer after connecting with cat5 cable

    Update on some things I have tried
    As I am not sure the cause, I have been reading and trying different things, last thing was to set the interfaces to Duplex Full
    I did this on both the Ethernet ports on the routers, and both of the Fast Ethernet ports being used on the switch, but has not changed the speed that PC1 is getting.
    Also turned on CEF on both routers

  • My Macbook is getting freeze when i connect with USB cable

    After I updated to OSX 10.7.4 Lion (Default 64bit).I try to use the touch panel device that I using before. But it keeping occur system freeze when I connect the usb cable.
    Sometime I can operate it normal but the percentage is very low.
    What 's the problem on?

    Could be a bad cable or the device isn't compatible with Lion and it is causing problems.

  • IPod Touch 3G won't connect to USB cable

    When the power is on, and the cable is plugged in, nothing happens. I connected to a computer to try to restore it and my computer didn't find the ipod. The wall charger usb thing didn't work either. I've tried two different cables and neither of them worked. I found out that if I shut the power off while its still plugged in, it will receive a charge, although nothing is on the screen to indicate that, I found that it was fully charged when I powered back up a couple of hours later. There isn't an Apple store in my state and the closest one is 9 and a half hours away. I bought the ipod at a pawn shop so I don't have a warranty anyway.
    Is there anything I can do to fix this?
    Additional note: The day this happened, the music app sort of froze. Right after I selected a song and the song title, artist name, and album title area wasn't completely on screen. I couldn't tap the back button or the album button in the top right corner. The weird thing was that the play/pause and skip buttons still worked. I had to fully power off and restart to fix that.
    Another additional note: The connecting of the cable is the only problem.

    Try placing the iPod in Recovery mode and then restoring
    Next try DFU mode and then restoring
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPod Nano 1st Gen Wont Charge With USB Cable

    I just purchased a brand new 4 gb white 1st gen iPod nano. From the moment I took it out of the packaging and tried to charge it with the provided USB cable I noticed it was not working. No response at all, nothing was getting into the iPod. I tried multiple USB cables with equal luck.
    I have a Dension I.C.E Link Plus in my car, I figured I'd try it, sure enough the iPod Nano began charging and booted up. I finished charging it to a full charge in my car.
    After a few days of use, I went to charge my iPod via USB cable and when I plug it in, it connects to the computer I can transfer songs perfectly but it constantly states that the iPod is "charged" displaying the plug battery icon not the flashing thunder bolt. So I figured it was charged, when I unplugged it from the USB cable the battery meter was clearly not charged.
    So, I assumed it was my computer USB ports being messed up so I purchased a A/C Wall Charger Adapter. Once again it would only display "charged" so far the only thing that will charge my nano is my car.
    With the A/C wall charger I have even tried multiple cables with no luck.
    CAN SOMEONE HELP ME!?!?!? I thought it was suppose to charge with the provided USB cable? Thanks!

    Yes you have a one year warranty from the date of purchase from Apple. Go to this link and on the bottom right hand side it will ask you to enter your serial number and will tell you if you are still under warranty. http://www.apple.com/support/
    If you are you can take it to a Apple store, or request service online here http://depot.info.apple.com/ipod/
    If it is out of warranty you can google a third party service provider and get it serviced out of warranty. There are two that I know of that provide free diagnostic service. You only pay for shipping and they will tell you what is wrong and what it will cost to fix. They are ifixipodsfast.com and ipodmods.com but there are others also (I just have no experience with them) Good luck and as was stated it should charge from your usb. and just for grins, look at the docking connector on your ipod and see if there is any obstruction that is obvious.

  • How can I stop iTunes from dropping my iPhone 5 when connected with USB cable?  It sees it and start a backup and then it drops and tells me cannot find phone.

    My HP notebook 64 bit Windows 8 after the last iTunes update will detect my iPhone 5, sync and when finished with thy sync I start a backup to my computer.  It runs fine for a bit and then gives me message I have changed settings on my iPhone 5 and asked me if I want to update.  I OK the question and runs a bit more and then drops the connection telling me cant find my iPhone 5.  I can restart iTunes and start over and does the same thing.
    ITunes update 11.1.1.62 had difficulties with the updates on 64 bit Windows 7 and 8.1 causing an error on boot other trouble.  I found solution on research that insturcted to Remove iTunes, Bonjour, Apple Support and Apple Update and reload iTunes old version.  I simply reloaded the new version becasue did not have the old version of iTunes.  I have been working fine with the old version.  I know problem is a simple setting somewhere but it is NOT SIMPLE to me since I dont know where the find the simple setting.
    Will someone tell what to do.  I appreciate all you smart guys.

    My apologies...the version is 11.1.4.62 not as stated aboive in my problem description.  I'm trying again and it just finished syncing fine and my iPhone 5 is still connected to iTuns physcially with USB lightening cable and is displaying the iPhone icon top right.  I clicked on it and iTunes is now "hung' or  locked up.  Shows to be an active running application but can't get back to it so willl have to kill with task manager.  There is some kind of problem going on with the latest version of iTunes and Wndows 7 and 8.1 or something.  My iPhone 5 now has a new feature that it is now asking me if I "Trust" this computer.  iTunes just came "unhung" after several minutes while I was typing this. Now I am going to start the backup to this computer HP Winsows 8.1 and iTune 11.1.4.62 and see what happens.  Says it is Backing up Jerrys iPhone but the Barber Pole progress bar is not turning an iTunes is hung again and I cant get back to it from this page I am typing on.  Maybe it will eventually release as it did a moment ago. 

  • Nokia Lumia 630 phone connection with USB cable an...

    Kindly be advised that I have been able to easily connect my Nokia E6 in the past to my Lenovo Thinkpad T530 running Windows 7 (64 bit) via Nokia Suite and Windows Explorer by both Bluetooth and the USB cable and was able to see the D and E drives (e.g. mass storage and phone memory) of such Nokia phones. 
    Since I connected my new Nokia Lumia 630 to the same notebook computer, the bluetooth phone appear under Bluetooth devices and music and sound can be relayed between the computer and the phone, however, no files structures are being displayed under such phone connection in Windows Explorer during a Bluetooth connection.  During a USB Cable connection at least the documents and photos folders appear in Windows Explorer but nothing else on the D or E drives are displayed.    
    Even the Zune (the Nokia PC Suite replacement) does not want to even connect with the phone device from the notebook!
    Kindly advise why I am unable to access the Nokia Lumia 630's full mass store and phone memory via BlueTooth or USB Cable from my Lenovo Thinkpad T530 running Windows 7 (64 bit) ?

    Jonkie wrote:
    Zune […] does not want to even connect with the phone device […]
    Zune was targeted towards Windows Phone 7. It got replaced by the Windows Phone app for desktop – which does not give any more feature than you have already.
    Jonkie wrote:
    no files structures are being displayed under such phone connection in Windows Explorer during a Bluetooth connection.
    Windows Phone 8.1 does not support the Bluetooth profile OBEX File Transfer (FTP) as Symbian did, yet. Because this is a feature request, there you go …
    Jonkie wrote:
    D or E drives are [not] displayed.
    What files are missing, what do you expect exactly? Then, I look-up the corresponding feature request.

  • My itunes doenst seem to be able to pick up my iphone 5 or iphone 4. When i connect with USB cable it says device unknow.

    I have tried most thing like re-installing Itunes... ive called up Apple support but they have zero interest as its a Windows operating system, So I called windows support... 2 hours later still couldn't connect to my iphone.  Just seems the device driver not working properly.   Any help would be appreciated.... also bear in mind im no computer guru... so Janet and John explanation welcome !!  ha

    Perhaps something in this support article will help:
    http://support.apple.com/kb/TS3221
    Regards.

  • I reset my ipod touch, and a picture of a usb cable and itunes image appeared, what does that mean?

    please help me, i dont know whats wrong

    This means your iPod is in recovery mode, try restarting the device agian (Hold the home + Power button for 10secounds), if the device goes back to this screen you will need to plugg it into your computer and most likely have to put all your content back on the device and restore from a backup
    If you have any questions feel free to ask
    Syther101

  • Why Nokia 6630 Connected with USB cable not openin...

    I am using Nokia 6630. When I connect it to my PC installed Windows XP SP2 and Nokia PC Suite Ver 6.6.16.
    Mobile is connected normally but when I try to send or open sms through PC Suite then it would not open. Please tell me that why it happens and how I can resolve this problem?

    Hi zyyads!
    i'm using the latest version of pc suite & dont have any problem opening & sending messages,try it
    http://europe.nokia.com/A4144905

  • Brand new Ipod Classic 80Gb - Synching Problems - Ipod ejecting itself

    Bought a new 80Gb Ipod last week after my old one crapped out. Computer also crapped out so had to load all my CD's to another laptop on newly downloaded Itunes 7.5. Hooked the new ipod up to the laptop and immediately had problems with the Ipod 'ejecting' itself before any songs were loaded. Furthest I managed to get was name the darn thing before it ejected. So, tried the 5R's with no success - still kept on 'ejecting' - sometimes straight away, sometimes part of the way through synching the library always with the end result of no songs on the ipod. Tried updating windows, updating Itunes, restarting computer, using different cables, different USB ports (all 2.0) with no success. Took the Ipod to the Apple Genius Bar where they restored it and managed to successfully synch a few tracks. Thinking the problem was solved - took it home and it is doing exactly the same thing again. AAAARRRRGGGHHH. Trawled the forum boards all day yesterday found a few suggestions I hadn't tried - setting it to enable disk use etc etc. When I hooked the ipod up last night it was ejecting immediately after connecting so not even giving me a chance to try the new fixes. Plugged it in this morning for a last ditch attempt and it connected long enough for me to switch on the manual synching and I successfully loaded 32 songs out of 4000 (yippee!!) before it started the same carry on again - disconnecting itself..
    This is so frustrating - what has happened to the ipod??? I had no trouble at all with my old one. A new piece of kit such as this should not be so time consuming and stressful. After this experience there is no way I will buy another ipod.
    Has anyone got any suggestions?

    I had over two weeks of frustration getting the right collection of fixes installed (iTunes 7.5 and 1.0.2 on the iPod; 1.0.3 should be OK). My symptom was that iTunes starts to go spacey on me when I plug the iPod classic into the USb port. There are long delays that I can't find a good cause for.
    Start up iTunes on your PC.
    Before you connect the iPod to your PC, try putting the iPod into Disk Mode (don't know the article info but there is one on this site; just search for "Disk Mode". There will be a check mark on the iPod screen when you have successfully arrived there.) Then plug it into the USB port on your PC.
    It may take several seconds/minutes for the iPod to be recognized in iTunes (I get some help with this by clicking on the Windows Start button, which overlays part of the iTunes screen, and waiting for iTunes to refresh its screen.)
    Before you click the Sync button, be sure you have chosen all the tabs you want to sync; since my music library is over 40GB, I choose this one first and let iTunes copy over my whole music library. I also check the Enable Disk Use box on the Summary screen. I then go out for coffee or to the bathroom (it takes a while).
    Once everything is copied over, be sure to press the Eject button in iTunes to be sure it is releasing the iPod.(Try my Windows Start button trick above to get positive feedback when it is safe to disconnect.) When it disappears from the list on the left-hand side and the screen is refreshed, it is safe to disconnect the iPod. (I'm not sure this is absolutely necessary, but it works for me.)
    It can be a little dicey to get the iPod out of Disk Mode or even to just turn off the iPod, but keep trying and you should be able to get it back into normal mode with all your music, video, podcasts and photos (haven't tried Contacts or Games) playable.
    Getting
    When all the information has been copied over,

  • I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with car, its working fine, how 2 resolve ?

    I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with same car, its working fine, how 2 resolve ?

    Morning Indrajit Chatterjee,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Best of luck,
    Mario

Maybe you are looking for

  • How do you make this type of grid?

    This is a very very very simple question, I was wondering how you would lay a grid flat back like this: http://cbu2029.deviantart.com/art/Cyberpunk-City-61614863 I have the grid made, with tthe grid tool. I tried shear tool and that doesn't seem to g

  • Unable to refresh data

    I have a web template. There is a button which allows the user to upload a file via web dynpro and a planning sequence. The upload works fine but I'm unable to refresh the web template afterwards so that I can see the data changed by the planning seq

  • HT3702 locked out of itunes

    cant purchase. forgot security question answers. locked out

  • Skipping beginner guide section: "disable input hotplugging". That ok?

    I'm skipping the section in the Beginner's Guide called "Disable input hotplugging."  Is that ok? Or should I disable it and let HAL use the settings from xorg.conf?

  • I need 128 bit encryption to use a goverment site

    I need to go to this web site for a job app. it won't let me submit my information because it says I need 128 bit encryption