TS1369 My ipod, i connect ti with a usb cabble and it always says that it is connected with a firewire and please connect it with a usb cable, What can i do?
i dont know what to do and itunes doesnt recognise it
There is a good chance something is lodged in your iPod's dock connector socket or some of its pins may be bent. I would still try to use compressed air to blow it out just in case and also double checked for any damage.
Perhaps you can try resetting it as well. To do this, toggle the hold switch on and off, then press and hold the Select (Center) and Menu buttons together until the Apple logo appears.
B-rock
Similar Messages
-
I recently got a new computer and got rid of my old one. I am trying to put the music from my ipod touch onto my new computer but keep getting a message saying that my ipod is already synced with a library and cannot be synced with more than one. How do I access that library on my new computer and if I can't are their other ways for me to put the music on my ipod into my new computer?
Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device -
the computer my itunes were on completely crashed, nothing was recoverable. i bought a new computer but my ipod would not sync with it. i rebuilt my itunes library from scratch but my ipod will not sync with it.how do i get the two devices to sync?
Follow the steps given here…
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I was backing up my phone with ICloud then all of a sudden it is saying that I have to plug into Itunes. Waht can I do?
Not really necessary to go into DFU mode when the device is just reporting it is in recovery mode if it is saying connect to iTunes. Connect to iTunes and do a restore. See this support document if you have any issues. http://support.apple.com/kb/HT1808
-
tried updating my sons ipone w IOS 6.1.2 and phone froze with the itune icon and a pic of a usb cable, what can I do
what it mean to tell you is to connect the ios device to a computer running itunes
using an usb cable to restore the software so it will work once more -
I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
Also see your other post > After updating iOS iPod is showing only iTunes log with USB Cable.. -
my ipod touch get restart by itself, and just get stuck with the apple logo, What can i do?
Try connecting it to your iTunes library in recovery mode using the instructions in this Apple support document.
http://support.apple.com/kb/ht1808
Otherwise, try connecting in DFU mode.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?
Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom? -
I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?
iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected? -
i finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??
In the iPhoto preferences verify that yo have the correct print products country selected.
Do you have any firewire software such as Little Snitch?
Is your internet connection working ok?
LN -
I recently bought Apple Composite AV Cable and while i can use my old IPOD to connect to my car's tv I can not use my IPAD 2 or IPHONE 4,,why?
does that mean I can not buy a movie or tv show from itunes and watch it on my car tv through my iphone? Does that also mean I can not watch any video even the ones I take via the iphone camera? That makes no sense, f that is true what is the rational? And how come it works from the IPOD?
-
After last iTunes update 3 days ago, my iPod doesn`t sync with my iTunes. What should I do?
Regards,
GiseleTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Acrobat can not connect with the email program, what can I do?
Acrobat can not connect with the email program, what can I do?
Hello,
I'm sorry you're having trouble; unfortunately, I'm not sure I understand what's going wrong. Would you mind giving me more details about what you're trying to do and what the problem appears to be?
Just in case you're using the desktop version of Acrobat and not Acrobat.com (which is the forum to which you posted your question), here's a link to their forum so you can repost your question there:
http://forums.adobe.com/community/acrobat
Thank you! -
I have added my hotmail email account to my ipod but when I open/delete emails it is not syncing with my computer. What can I do so that when I delete emails from my ipod, they show up as deleted when I access hotmail from my computer?
If you like to set up the Hotmail account as an Exchange account, see this Apple support document.
iOS: Hotmail, Live, or MSN email accounts
B-rock -
We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?
No, not all network clients -- only the two mac portables and they run together very rarely. The windows machine is hardwired to the modem router combo, and that's always sailing smooth. The mbp that is most used is perhaps 20 feet max from the router - and in another room. But it also happens when I take in into the same room as the router. On occassion, I have noticed while using network diagnostics, that one digit in the IP number sometimes appears to go awry. I then try to set up manually - and it works for a bit but is hugely erratic.
I rigged a hand me down airport express and set up a separate network for the two macs and it ran beautifully for some weeks, but that little piece is now dead and none of the retailers in my suburb seem to have one in stock. I don't want to be forced to buy an airport extreme and here in India, there's no trustworthy online ordering option.
The man from the ISP's been here several times and I don;t think it is a modem/dsl issue because the smartphone connects and the macbook drops when both are the same distance from the router? I am truly foxed and intensely irritated! :-(
Maybe you are looking for
-
Priority of message has not effect on delivery order
Hi, I'm sending messages into a JMS queue with two different priorities and a property for use with a JMS selector. Then via a JMS message recievers that have a selector I recieve the messages. But the order is always the same First in, First Out. Ex
-
What's wrong with Logic and Soundtrack Pro
Just spent a frustrating day trying to record with Soundtrack Pro and Logic Soundtrack is working on and off Problems: 1. Even if sounds are loaded in the multitrack editor, no sound when playing. Only the Solo (S) button make a track sound. No idea
-
Set the column name of a table in a list box
is there any code to set the column name of a table in a list box at oracle devloper 6i? pls help.
-
This method should not be called anymore. The client was already released i
Hi, while configuring Business Packager for Projects 50.3 fo, we made few changes in R/3 side as per the documentation. after that we are getting following error in portal "This method should not be called anymore. The client was already released int
-
OK, so I have been surfing the net for help/solutions but to no avail... When I try and burn a disk from itunes on to a blank disk i get the 2131 error which judging by the ammount i have seen written about it, is VERY common. I am about to throw my