TS1369 These methods did not work for me, did anyone find another usefull way?

So i have tried all the methods that apple provides when your Ipod is not being detected by Itunes or my computer. Does anyone else know what to do or what i should try to figure this issue out??

Try it on a different computer.

Similar Messages

Instance Dependent Public Method is not working for Workflow

Hello Experts,
I have made Custom class for a workflow. This class is triggering the WF fine but the problem is while trying to execute a WF task which contains a Instance Dependent & Public method its not working , the WF task is not processing though I'm passing the instance of the class properly from WF to WF task . When I'm changing the method to Static & Public then the workitem is executing perfectly. Can you please help & suggest the way to find the problem ?
Thanks & Regards ,
Jeet

Are you absolutely sure that you have the instance of the object in the workflow container? Open the technical log the see if the object instance is there - or is the container element initial (or "not set")?
yes it is instantiated properly no error over there.
What about if you test the method directly in SE24 (as an instance method)? Is it working then? If you can make it work in SE24 as an instance method and you are sure that the instance exists in the workflow,
I have checked the class in a stand alone run in this case also it runs fine as before.
The obvious question of course is that have you implemented the IF_WORKFLOW interface methods (the two first ones).
it is coded like below
BI_PERSISTENT~FIND_BY_LPOR
create object result
      type
        (lpor-typeid)
      exporting
        ip_key = lpor-instid.
CONSTRUCTOR
   me->m_KEY    = ip_key.
   me->m_por-catid = 'CL'.
   me->m_por-typeid = CL_ZZZ'.
   me->m_por-instid = me->m_key
BI_PERSISTENT~LPOR
result = me->m_por.
Main confusion is Method is working only if declared STATIC & PUBLIC but not for the INSTANCE DEPENDENT & PUBLIC.

Method "show_doc_meta_data" not working for me in "cl_gui_ecl_2dviewer "

Hello all,
I want to show the meta-data within an image, when showed with the ECL-Viewer.
I performed the following steps in my ABAP-Code, but it is not working.
Creating an object of the class "cl_gui_docking_container"
Creating an object of the class "cl_gui_ecl_2dviewer" with a refernece of the container
Calling method "create_toolbar"
Calling method "open_document" with the path to the file and the file_type
Up to this point everything works without any problem.
But now I want to show my created META-DATA of the image, which I have added with the method "set_doc_meta_data".
After calling the method "show_doc_meta_data" the appended data is not visible on my image.
What going wrong in the method of my coding?
I am grateful for any help.
Best regards
Christian

Hi Christian
Did you solve this issue?
I'm trying to use Badi DOCUMENT_ECL01 to insert watermarks on some DMS documents but it's not working, maybe you could give me some advice.
Regards
Daniel

LSMW Recording method is not working for transaction code FBL5N

Hi Experts,
I am trying to prepare LSMW to create dispute cases for customer line items through LSMW Recording method. When i was trying to do through SHDB Recording its working properly through Program. But its not working through LSMW Recording method means its not executing to next screen, immediately its displaying session completed screen.
Please do let me know any soution for this.
thanks,
Sriram.

Hi Sriram,
If my memory serves me correctly, a BDC will not work correctly with a list. This is mentioned somewhere in the SAP help pages.
Now I am not familiar on how to create dispute cases but using FBL5N does not sound to me the way to go. I assume that you use FBL5N in order to determine to which documents to link the dispute to, however you should be able to get the requested info from the BSID/BSAD tables.
Also in case you want to change the customer line item in the accounting document, check the data transfer workbench (SXDA) as SAP delivers a standard program for this.
Kind regards,
Robert
Edited by: RJ. Schamhart on Jan 14, 2011 12:35 AM
Edited by: RJ. Schamhart on Jan 14, 2011 12:43 AM

VF06 not working for drop ship orders

Hi All,
We use VF06 for creating billing docs. Interesting it works good for all order/delivery types but does not create any billing document for third party sales orders. I have flagged both - order related and delivery realted document indicators and leaving all the selection inputs blank except for the sales org. When we try to create the invoice for a drop ship order, it gets created but surprisingly does not get picked up in VF04 or VF06.
Any help would be appreciated.
Thanks & Regards,
Vidya

Hi,
I did go through some notes and could find out the problem. In copy controls we have set the billing quantity to F to enable billing even if GR is done for the PO and need nt have the Vendor Invoice Recipet to be done. SAP says in some notes that if this is set, then the billing due list will not have the order displayed even if it can be manually invoices. But I dont have any idea how to overcome this. SAP has provided standard reports but somehow these reports are not working for me.
Thanks & Regards,
Vidya

Hyphenation not working for Russian language

Hello All,
We really shocked to see that hyphenation not working for Russian language, anyone faced this issue? Please let us know how to rectify this issue since we need to complete one of the project with Russian language.
Thanks in advance.
Praveen

@Kasyan: Thanks for the response, I'm using 5.5 and facing this issue while select the language 'Russian' no where found the hyphens and in most of the places looks loose line due to missing of hyphens.
Could please confirm again?
Thanks,
Praveen

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I have an Iphone 4 and my internet has not worked for a good 10 months, why wont it work? my dad pays for my data plan, so its not that i dont pay my bill. I've even tried to reset my net work settings, and that did not work

i have an iphone 4 and my internet has not worked for a good 10 months, why wont it work? My dad pays for my data plan, so its not that i dont pay the bill. I've even tried to rest my net work settings, and that did not work. I went to AT&T and they said that the only way to fix it was to buy a new phone, and im not going to buy a new phone with out my upgrade. someone, please help!

Hey lilmissindian!
I have an article for you here that will help you troubleshoot this issue:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Broadband did not work for days

my broadband did not work for days. I spent two lengthy periods of time on the phone to sky, once fo 1.5 hrs and the other time for 1 hour. Both phone calls achieved nothing. Eventually the internet started working again. The sky service status online advised that my area had no problems. The service from sky has been incredibly rubbish and has made me very angry. In order to get myself online i had to pay BT Wifi £8 for a day pass. Sky have been very generous and have compensated me 62 pence for the time I have been without the internet. My question to sky is..... will youplease refund me the £8 I have spent and give me some sort of compensation for the dismal service provided. I have tried to call calling you this morning but you phone is engaged, I tired emailin gyou but you have no email, I tried the live chat, but it is busy. The forum is the only place I can go.

Sky don't post here and won't respond to you here. The forum is customer to customer support only.
Official complaints process as below:
http://help.sky.com/articles/how-to-make-a-complaint
Sky are under no obligation to compensate you for the loss of service and the 62p is, I assume, the cost of your package for the days it was not working.

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

REP-51018 -- cookie method is not working :(

Trying to invoke a simple report from a simple form by using web.show_document()
if I pass the userid=x/y@z then it work fine
if I try to use the cookie method as defined in the OTN whitepaper "Secure Web.Show_Document() calls to Oracle Reports", I am bumping to the REP-51018 error.
Tried the metalink and found primarily 2 documents, one (note#279938) is suggesting using
SYNCHRONIZE; prior to invoking the WEB.SHOW_DOCUMENT(...), which I did - not worked,
then I read the document (#309652.1) which tells that the cookie method will not work if not using fully qualified domain name -- I have a fully qualified domain name and I can see in the browser cookie settings that the domain is set correctly.
I also edited the basejini.htm and basejpi.htm files and added the suggested entries as shown in the same OTN whitepaper (page #9). And recycled the entire iAS server after all the editing (reports.sh, formsweb.cfg, etc).
I can see the cookie is saved on the client browser and the userid is displayed in the JInitiator control window.
FrmReportsInteg0: Debugging true
FrmReportsInteg0: Adding new userid string "zafer/mutlu@jtls5"
FrmReportsInteg0: Default cookie domain: .rolands.com
FrmReportsInteg0: set RW_AUTH10g
FrmReportsInteg0: Arguments: encryptionKey=reports9i; Reports version=RW10g
FrmReportsInteg0: Cookie value for RW10g is: zafer/mutlu@jtls5;1135302256455:30
FrmReportsInteg0: Encoded cookie value is: W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q==
FrmReportsInteg0: Complete cookie string is: userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q==
FrmReportsInteg0: Added domain ".rolands.com" to cookie
FrmReportsInteg0: Generated Cookie String: userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q==; domain=.rolands.com; path=/
liveconnect: JSObject::eval(document.cookie="userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q==; domain=.rolands.com; path=/")
liveconnect: the url of the applet is http://raptus.rolands.com:7778 and the permission is = false
FrmReportsInteg0: NS Cookie Set
network: Connecting http://raptus.rolands.com:7778/forms/lservlet;jsessionid=0a0a0a2230d8a457f8e558fe43b4b3e5a9b908500738.e38Oc3aQc3ySci0TbheLaNuSah50n6jAmljGr5XDqQLvpAe with proxy=DIRECT
network: Connecting http://raptus.rolands.com:7778/forms/lservlet;jsessionid=0a0a0a2230d8a457f8e558fe43b4b3e5a9b908500738.e38Oc3aQc3ySci0TbheLaNuSah50n6jAmljGr5XDqQLvpAe with cookie "userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q=="
network: Connecting http://raptus.rolands.com:7778/forms/lservlet;jsessionid=0a0a0a2230d8a457f8e558fe43b4b3e5a9b908500738.e38Oc3aQc3ySci0TbheLaNuSah50n6jAmljGr5XDqQLvpAe with proxy=DIRECT
network: Connecting http://raptus.rolands.com:7778/forms/lservlet;jsessionid=0a0a0a2230d8a457f8e558fe43b4b3e5a9b908500738.e38Oc3aQc3ySci0TbheLaNuSah50n6jAmljGr5XDqQLvpAe with cookie "userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q=="
The only thing I can see is this line:
liveconnect: the url of the applet is http://raptus.rolands.com:7778 and the permission is = false
if this is the problem how can I fix it?
What is wrong with this cookie method? What I am doing wrong?
Any input is appreciated very much.
Zaf.

Here is the code I am using in a when-button-pressed trigger in the form to invoke the report.
And yes, the javabean USERID_BEAN is created/defined under the CONTROL block, with all the properties as explained in the OTN whitepaper.
thank you.
=================================================
message('Invoking the related report...', ACKNOWLEDGE);
message(' ', NO_ACKNOWLEDGE);
DECLARE
rep_url varchar2(2000);
user_name varchar2(40);
passwd varchar2(40) ;
connectstring varchar2(20) ;
BEGIN
user_name := LOWER(get_application_property(username));
passwd := LOWER(get_application_property(password));
connectstring := LOWER(get_application_property(connect_string));
rep_url:='/reports/rwservlet?&envid=jtlsDDS&&report=readme.rdf'
||'&desformat=htmlcss&destype=cache&userid=';
-- Write log messages to the Forms JInitiator console. The next line must
-- be disabled before running this code in any production environment
set_custom_property('CONTROL.USERID_BEAN',1,'WRITE_LOGOUTPUT','true');
-- set userid in encrypted cookie before calling Web.Show_Document()
set_custom_property('CONTROL.USERID_BEAN',1,'ADD_USERID',
user_name||'/'||passwd||'@'||connectstring);
-- writing the cookie
set_custom_property('CONTROL.USERID_BEAN',1,'WRITE_USERID_COOKIE','10g');
-- Add the next line to correct REP 51018 error
SYNCHRONIZE;
WEB.SHOW_DOCUMENT(rep_url,'_blank');
END;

Auto tab focus method is not working in iOS devices please share the ideas why its not working?

Auto tab focus method is not working in iOS devices. Please share the idear i am facing this issue while developing code for devices.

Hi there,
I can confirm this bug.
Not sure if this info is relevant, but this is my experience:
I am on the FIDO network, and so are two other people I know.
We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
I have not yet had a chance to test this on Bell, Telus, or any other carriers.
Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
I have yet to try this, but hopefully someone will have a better solution.

Repaint() method is not working in MAC IE

Hi All
why repaint method is not working in MAC IE ? What i am doing is in one class which is inheriting Canvas class getting the keybord input then adding it to main applet.
Please help me i am trying it for whole week and i couldn't find any solution. I didn't put my code but if anyone is willing to help me i can post it.
Thanks in advancs
Shan

Hi
Thanks for your reply. Actually i wrote simple applets and those are working well.
So i did debug the code and i found that when i am running the following code in Apple MAC IE, nothing is happening in handleEvent method. Especially it is not going into the if statement (if (evt.id==401)). here i am checking for KEY_PRESS. I also tried with keyDown method but same problem in MAC IE.
I am pasting the code that is giving me problem.
import java.awt.*;
import java.applet.*;
public class testApplet extends Applet
public void init()
setLayout(new BorderLayout());
editableArea = new EditableArea();
editableArea.setBackground(Color.yellow);
add("Center", editableArea);
EditableArea editableArea;
import java.awt.*;
public class EditableArea extends Canvas
String s = "";
public boolean handleEvent(Event evt)
if (evt.id==401)
if(evt.key >= 32 && evt.key <= 255)
char c = (char)evt.key;
s = s + c;
repaint();
return super.handleEvent(evt);
public void paint( Graphics g )
g.setColor(Color.blue);
g.drawString( s,5,15);
--------------------------------------------------------------------

Brushes are not working for lightnening

My brushes do not work, for lightening. I restet them and did control alt shift already.

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

TS1369 These methods did not work for me, did anyone find another usefull way?

Similar Messages

Maybe you are looking for