TS1369 Why  i cannot see Ipod icon into my laptop after i connected to my laptop with usb cable

Why i cannot see ipod icon into my laptop after iconnected to my laptop

If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.
Otherwise:
iOS: Device not recognized in iTunes for Windows

Similar Messages

  • Theres no ipod icon on the side AFTER i connected the ipod!

    help me!i connected it already!!!!
      Windows XP  

    Hi roblesb,
    Thanks for visiting Apple Support Communities.
    I'm sorry to hear that you did not receive the information you needed at the store.
    It sounds like you are trying to sync your iPod using a computer. If so, this article shows how to locate the iPod icon in all iTunes versions:
    Locate and view your connected iPhone, iPad or iPod touch in iTunes
    If you need to download the latest version of iTunes for your computer, you can find it here:
    Apple - iTunes - Download iTunes Now
    All the best,
    Jeremy

  • I have downloaded an app but cannot see the icon

    I have downloaded an app but cannot see the icon. I have tried to download again from app store but it says it is installed

    Do you have restrictions enabled on the iPad? Settings>General>Restrictions? Maybe that is why you cannot see it. Have you swiped from screen to screen to look for it?
    You can search for the app to confirm that it is on the iPad, but that will not show you the location of the icon and if the app store says it is installed - then it is installed. But this would let you access the app. Swipe from the right in your first home screen and the search feature appears. Type in the name of the app to find it. you can tap on the icon to launch the app.
    Try restarting the iPad as well and maybe the icon will show up. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    This may even help if all else fails. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Why I cannot see more than 200 e-mails

    Why I cannot see more than 200 e-mails at my iPad

    Thank you King_Penguin. I found. I have multiple e-mail accounts. I can see Load More Messages only when I clik All Accounts. When I go to particularq, let say, Gmail account, I do not see Load More Messages.This mean that I must download more messages from all accounts, even if I need only more messages from particular account. But anyway it is helpfull.
    Thanks again
    Drazen

  • Since updating ios7, my wifi still works thru airport express, but I cannot see airplay icon on my phone or iPad.  Where did it go...how do I get it back?

    Since updating ios7, my wifi still works thru airport express, but I cannot see airplay icon on my phone or iPad.  Where did it go...how do I get it back?

    Got it...KyotoRenee had the answer....
    When playing a song, slide finger from bottom of screen up to the top to see icon that they hid

  • HT4437 cannot see airplay icon on iPhone 4

    I have recentely purchased an apple tv and connected to the home Wi-Fi with my iPhone 4. Apple TV seems to be setup ok but I cannot mirror anything as I cannot see Airplay icon in my iPhone 4? I am also using iTunes 10.6 with Windows Vista but cannot share any content from PC to Apple Tv where I have the home sharing Turned On. any help will be appreciated.
    Thanks

    mirror only works on ipad2, iphone4s and the new ipad
    not on iphone4

  • Why i cannot see email from apple to reset my password?

    why i cannot see email from apple to reset my password?

    We are fellow users, we won't know why. You've checked the spam folder as well as the inbox on your email account, and if you have a rescue email address on your account then you've checked that email account as well ? If you still can't find it then try requesting the reset email again
    If re-requesting it doesn't get it either then try contacting Support in your country, they should be able to reset it for you.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

  • HT202443 why I cannot see my iBook on the iTunes store thought my **iPhone**?

    why I cannot see my iBook on the iTunes store thought my **iPhone**?

    Let Apple know your views about it at
    http://www.apple.com/feedback
    To create a book for all devices, you need to do it in .epub format.  The apple app for that is Pages.

  • Why do I have two icons for iMovie '11 after downloading the update from the App Store?  Previously I had iMovie '09.

    Why do I have two icons for iMovie '11 after downloading the update from the App Store?  Previously I had iMovie '09.

    Do you see two versions of iMovie in your Application folder?
    You can drag the icons out of the dock and then drag what you want back to the dock from the Application folder.
    Matt

  • I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.

    I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.

    Thank you for your post. This forum is for Sony Consumer and Vaio products - for gaming questions and discussions there is a separate PlayStation forum:
    http://community.us.playstation.com

  • TS1369 My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What's wrong?

    My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?

    Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable?  It might not also hurt to connect it to another USB port as well.
    Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
    Putting iPod into Disk Mode
    B-rock

  • Cannot see transported items in Queue, even after releasing them.

    I cannot see transported items in Queue, even after releasing them. When Iam in transaction: SE09, I am able to see all the released objects, and the check marks next to each one which looks good...Where are these files? Under usr/sap/trans, they show up under logs with nothing in them except log data...Not in Cofiles & datafiles either.
    Any input would be greatly appreciated.
    Alan

    Hello Jazz!
    Our developer released them, and I will get more details from him. We can see them when in SE09/10. Just cannot see them in the import queue? Also can't find the files under: usr/sap/trans, except the logs???
    We just want to find these files, and either zip them up, or put them on a CD for later use, and this project will wind down soon.
    Any other suggestions on how we can find these files, as all exports normally show up in usr/sap/trans/data, and cofiles...but not in this case???.
    Thanks Again,
    Alan

  • TS1424 Why does my I pad go into shutdown mode after I make selection to view all video.

    why does my I pad go into shutdown  mode after i choose  video/episode  to  view?

    Hi marie140,
    Welcome to Apple Support Communities.
    It sounds like your iPad isn't behaving as we'd expect.
    The advice in these links can be very helpful with resolving an iPad issue:
    iPhone Assistant
    http://www.apple.com/support/iphone/troubleshooting/
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Best,
    Jeremy

  • Cannot see my text or the cursor after installing pages...

    Cannot see my text or the cursor after installing pages...

    At a guess you have simply chosen a blank Layout mode template.
    Blank Layout templates have absolutely nothing on them, you have to add your own textboxes.
    Choose a Word Processing template, they are listed in the Template Chooser sidebar.
    Peter

  • How can I stop iTunes from dropping my iPhone 5 when connected with USB cable?  It sees it and start a backup and then it drops and tells me cannot find phone.

    My HP notebook 64 bit Windows 8 after the last iTunes update will detect my iPhone 5, sync and when finished with thy sync I start a backup to my computer.  It runs fine for a bit and then gives me message I have changed settings on my iPhone 5 and asked me if I want to update.  I OK the question and runs a bit more and then drops the connection telling me cant find my iPhone 5.  I can restart iTunes and start over and does the same thing.
    ITunes update 11.1.1.62 had difficulties with the updates on 64 bit Windows 7 and 8.1 causing an error on boot other trouble.  I found solution on research that insturcted to Remove iTunes, Bonjour, Apple Support and Apple Update and reload iTunes old version.  I simply reloaded the new version becasue did not have the old version of iTunes.  I have been working fine with the old version.  I know problem is a simple setting somewhere but it is NOT SIMPLE to me since I dont know where the find the simple setting.
    Will someone tell what to do.  I appreciate all you smart guys.

    My apologies...the version is 11.1.4.62 not as stated aboive in my problem description.  I'm trying again and it just finished syncing fine and my iPhone 5 is still connected to iTuns physcially with USB lightening cable and is displaying the iPhone icon top right.  I clicked on it and iTunes is now "hung' or  locked up.  Shows to be an active running application but can't get back to it so willl have to kill with task manager.  There is some kind of problem going on with the latest version of iTunes and Wndows 7 and 8.1 or something.  My iPhone 5 now has a new feature that it is now asking me if I "Trust" this computer.  iTunes just came "unhung" after several minutes while I was typing this. Now I am going to start the backup to this computer HP Winsows 8.1 and iTune 11.1.4.62 and see what happens.  Says it is Backing up Jerrys iPhone but the Barber Pole progress bar is not turning an iTunes is hung again and I cant get back to it from this page I am typing on.  Maybe it will eventually release as it did a moment ago. 

Maybe you are looking for

  • Detect second disk on Windows Server 2012

    Hi, newly installed Windows Server 2012 R2 with two internal harddrives. The two disks shows up in Disk Manager but only one in File Explorer. How can i configure the server to expose the second disk in File Explorer? /Roger

  • Exporting report to Word, Word editable or RTF adds page breaks

    Our workforce management software (Aspect Workforce Management) uses Crystal 2008 for customer reports.  Previewing, printing, and exporting to HTML, PDF, and Excel all work fine but exporting the report to Word, Word Editable, and RTF results in a d

  • Keeping my Retina MacBook Pro safe in my dorm.

    I have a retina MacBook Pro and was wondering how to keep it safe in my dorm room. The rMBP doesnt have a lock on it like the other MacBooks so I was looking for suggestions. I know buying a safe is an option but I figured I would ask.

  • Not able to start OHS Apache Server in WLS EM console....

    Hi all, WLS 10.3.5 with Web Tier 11g ( 11.1.1.5) installed. I installed it with OHS and Web Cache and associated with domain. Now I go to FMW control and try to start the OHS and it tells me: Could not get secure socket for host and port 6701. The re

  • General topic: debugging RFC's called remotely

    I don't know if this is the right forum to ask this, but I thought I would give it a try.  It seems that I often find myself with the following dilemma: 1. I build a function module in SAP (and unit test it). 2. I call the function module as an RFC f