TS1372 a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

The linked article
http://support.apple.com/kb/TS1372
has some suggestions.  Did you try doing those things?

Similar Messages

  • IPad (1) unit could not recover. Unknown error occured (21)

    iPAD 1 running iOS 5.0
    Upgraded the unit. Worked for 4 days.
    Started to crash 4-5times in a row and then it just died on me.
    Tried restart the iPad without any luck. Boots up and the screen goes white.
    Running iPad into recovery mode and connect it to both a WinXP and Win7 machine. Same error message after running restore mode for a while:
    iPAD unit could not restore. Unknown error occured (21).
    no AV installed on my computers. firewall disabled.
    no other USB devices connected.

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Message was edited by: Texas Mac Man

  • Itunes application could not open. Unknown error occurred (-50)?

    Keep getting this message.  Any suggestions?

    This worked for me --
    Right click on the itunes.exe file in C:/program files/iTunes/, Go to properties and then to the security tab. From the security tab select 'Users' under the users and groups section and below that, gave users 'full access'
    Good Luck!!!

  • HT201210 i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?

    i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?

    i have done that
    same result
    the phone has a sim in it that is not active. does this cause the fault in question?

  • HT201413 My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error

    My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error (code 9). Any help?

    Found this thread by searching the forum. I hope it helps.
    https://discussions.apple.com/thread/5471311

  • When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

    When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

    If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

  • I am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad.  an unknown error occurs (1631).  what do I do??

    am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad.  an unknown error occurs (1631).  what do I do??

    The search bar can be very valuable...........
    In using it, I found out other's have had this issue and it likely means you have a 3G iPad?  If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • HT2932 When I try to save a file from my GarageBand to my PC it keeps giving me a error message . Message says could not be copied because error occurred. The file cannot be found. Any suggestions?

    When I try to save a file from my GarageBand to my PC it keeps giving me a error message . Message says could not be copied because error occurred. The file cannot be found. Any suggestions?

    I was trying to upload from my iPad to my pc.
    That was hard for us to guess, from your post It might have helped to mention the iPad.
    How are you trying to save the song to your PC? Are you sending the song to iTunes? If yes, as a project or as an audio file? Make sure, you select "AAC" and not "GarageBand", when you share the song from your iPad.
    If the clip is not too large, you might alternately try to share it by mail, see:
    Share GarageBand songs

  • After updating my ipad to ios7 it is on recovery mode. Then I tried to reboot it and it shows an image to connect to iTunes. I tried to connect to iTunes and restore it but it says ipad could not be restored and an error occurred. What can I do now???

    After updating my ipad to ios7 it is on recovery mode. Then I tried to reboot it and it shows an image to connect to iTunes. I tried to connect to iTunes and restore it but it says ipad could not be restored and an error occurred. What can I do now???

    http://support.apple.com/kb/TS3694#error3194
    This might help. Good luck, I really hope this all works out. :-)

  • I am trying to restore iphone 3gs i got the iphone "iphone" could not be restored. an unknwon error occurred (-1).

    i am trying to restore iphone 3gs i got the iphone "iphone" could not be restored. an unknwon error occurred (-1). on iso5.1
    Message was edited by: kaushal.info

    http://theiphonewiki.com/wiki/index.php?title=ITunes_Errors

  • HT1551 Apple TV "could not sign in unknown error"

    Apple TV "could not sign in unknown error"
    Has worked forever. Used it the other day. 
    Tried tonight and received the above message.
    Unplugged it, waited about 20 seconds, then
    Restarted it. Same results. Comes with an "ok"
    Button.  When I click it I get the same message. 

    Unplugged and replugged Apple TV and router still nothing.
    Spoke with Apple  and they suggested resetting and the restoring
    If necessary. Neither were.  Apple TV decided to start working
    Properly on its own.  2&1/2 years and still kicking.  This was the only
    Blip.  I love Apple. Cool or uncool. These products have rarely failede
    And if they do, the problem is always solved effortlessly.
    I love Apple products. Faithful to Apple for 20 years of little to no problems.
    Aprox 7 different Apple products currently in use in our home. 
    Nothing but the best. Did I say I love Apple?  I do.

  • "Your disk could not be partitioned" "An error occurred while partitioning the disk"

    hello, i am operating on a model a1286 mbp mid 2009 laptop, with 4 gb ram 360 gb hdd,
    snow leapord updated to maverick,
    bootcamped w/ win 7 32-bit
    i tried in mac os x maverick to use bootcamp assistant to partition my bootcamp 180 gb partition to be erased and then to start the install of 64-bit.
    the partitioning was stuck at about 17 percent for an hour, so i quit the bootcamp assistant - ive seen on reddit this was a bad thing to do, but i did it anyway because i saw someone posted about being to reboot and do a hdd repair then reboot and try to partition again
    now when i startup my rEfit program that shows me option of loading mac os x maverick or Bootcamp Legacy Os instead of bootcamp win 7 32-bit
    when i tried partioning again its asking me to free up space for 28 gb in bootcamp assistant , i did that, inserted win 7 64-bit dvd install and hit continue dialogue button in bootcamp assistant
    this is where i see i only have 145 gb used in mac os x with 18 gb free and in the windows side 14 gb
    status partitioning disk,
    but then i get an error message saying the partition failed with errors
    i googled and saw i had togo into single user mode by pressing cmd-s during boot and typing /sbin/fsck -fy
    i got a msg saying this command function is not recognized. - along those lines
    how do i reboot and start a repair of the disk?
    also i did a repair file permisions in disk utility but forgot to put back the power cord, so the battery drained and i assume the repair file permissions didnt finish and the mbp just auto shutdowned
    is there a command i could enter into the EFI shell? or single user mode? to repair the hdd partition in the mac os x maverick and the bootcamp legacy os side since the first time i tried erasing everything on the win 7 32-bit side bootcamp assistant got stuck at 17 percent partitioning then I voluntarily quit the program = now i cant partition bca gives me error of:
    "Your disk could not be partitioned" "An error occurred while partitioning the disk"
    thanks in advance,
    -r

    Is that the complete error message? Are you trying to partition the correct drive? It may be that you do not have enough contiguous free space on the drive for the partition.

  • Could not sign in Unknown error.

    Have had my Apple TV for over a year on the same iTunes account, working flawlessly. All of a sudden today, I get random:
    Could Not Sign In
    Unknown error.
    Messages.
    Restart - nada. Power interrupt - nada.
    Log off and try to log back in in settings: same message every time now.
    Help!

    Sort of. I did a full restore from settings, which resets it to factory settings, but with the latest software update. Then had to set it up like new, and re-login or register apps like MLB, Netflix, Hulu, etc. Took over an hour, but the problem hasn't been back since. Kind of sad that no one replies on these forums, including Apple support. I'm full Apple technology ecosystem in my home, but have started to shop other devices now after this experience. Technology issues I can take. Lack of support, not so much.

  • TS3694 i am updating my iphone 3g 4.1 to 4.2, but update is not completing,, i tried for several times but its not working. an unknown error occured (1015). now what can i do?

    i am know using iphone 3g ios 4.1. i want to update version 4.2. i tried 2 or 3 times but update is not completing. its showing ''an unknown error occured(1015). Now what can i do?

    That error is usually indicative that the phone was hacked/jailbroken. Was it?

Maybe you are looking for