TS1372 I-Pod classic 120GB just will not sync with tmy i-tunes.....I-tunes reports error 1415, 1417, 1418, 1428, 1429, 1430, 1436 or 1439......No idea what that all means. Ipod is very tempermental about saving my tunes, anyone no what to do?

I-pod classic 120GB will not sync with my i tunes errors reported 1415, 1517, 1418, 1428, 1429, 1430, 1436 or 1439, completely unsure what any this means? Is my I-pod for the bin seems strange as its only about 2 years old? It finds it very difficult to sync with any of my tunes at all, can anyone help with what to do please. Thanks

Read this thread. Post back your hard drive stats...
tt2

Similar Messages

  • I am having iPod classic 120GB Serial Number:8K913VF:2C7 I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1

    I am having iPod classic 120GB Serial Number:8K913VF:2C7
    I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
    How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • I've tried reseting my sync accounts the way all of the help articles say, but my computer and two android devices just will not sync with this new FF Sync vers

    I've tried reseting my sync accounts the way all of the help articles say, but my computer and two android devices just will not sync with this new FF Sync version.
    I've tried unregistering the device sync accounts, removing the accounts, reinstalling FF on all devices, etc.
    Nothing works. Please help.

    Hi mongoose00318,
    On the android devices in the Account section of your OS settings, please make sure that the account is not listed under "Firefox Sync (deprecated)" this is the old sync. Firefox for Android may need to be reinstalled and the Firefox Sync (depricated) account removed from the device.
    NOTE: DO NOT do this if there is data on the devices that have not obviously synced yet. An alternative is to visit accounts.firefox.com to see if you are logged into the device on the new sync sign in page.
    Does this help?

  • My first generation AppleTV will not sync with iTunes anymore.  I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689"  firewall is off

    My first generation AppleTV will not sync with iTunes anymore.  I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689"  firewall is turned off.. Any ideas?

    Thanks Rudegar,
    I only synch and do not stream off of my 1st Gen AppleTV
    I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
    I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
    Will keep working on other fix options (factory reset, etc.)
    Thanks again

  • Ipod Classic 7th generation will not sync with all movies in Itunes

    I just bought an Ipod classic today, due to my iphone 5 not able to connect to my car entertainment system and car stereo.  Needing a 30 pin to connect to it.  So I bought it, connected it to my mac computer, and not all the movie files will sync to it.  I get this message:
    For some reason, some of my movies will transfer to the ipod classic, and some will not.  They are all m4v files.  Does anyone have a suggestion?

    The files that won't copy probably have too high a data rate. From http://www.apple.com/ipodclassic/specs.html
    Video
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    tt2

  • My iPod classic 7th Gen  will not sync with my new computer. itunes is installed and updated.

    fellow iPod classic owners,
                                           the problem is a failure to sync with the new computer. the conditions are as follows: the new computer is a pc. it has the latest iTunes software installed. the iPod is installed properly. i'm fully recognized by my iTunes account. there is nothing lacking other than my iPod's refusal to sync with my new computer. what have i left undone? i could be suffering from a duh, but i'm not the only one. nothing in the apple world is as difficult as this one is, at least on the surface. if it were that simple an issue, no one would be having any problems with it. any more information needed can be provided by request. by the way, the computer being used has been authorized. that is a non-issue.
                                                                                                                 your help is appreciated,
                                                                                                                     hardphil.

    I believe the IPOD (Classic) uses USB 2.0,  and my new laptop uses USB 3.0.  I think they are not compatable because of this.  If you find a solution to this please let me know.
    Thanks,

  • IPod Classic 5th generation will not sync with new MacBook

    I have had a 5th generation iPod classic that I have been super happy with.  I have used it with several PC laptops.  Because I have gone through so many PC's, I decdied this year to get a new MacBook Pro.  Since my old PC was dying it took forever to get all my music and videos transferred to my new MacBook. Anyhow, I have had no luck syncing my iPod with my new MacBook.  I have read several other posts (but mostly older like 2007-2010) that others have had similar problems.  Here is a quick list of what I have done/what has happened:
    Initially, I would get one of two messages:
    'The ipod '(My Name) ipod' cannot be synced. An unknown error occurred (-124)'
    - 'The ipod '(My Name) ipod' cannot be synced. The required folder cannot be found.'
    Two times it told me I needed to use a USB 2.0 port (but I have a new MacBook and was using the newer 3.0 port).  I haven't seen that message since.
    It actually "transferred" over 4500 of my 7000 items (I have a ton of music that I use for my job) and then just stopped. When it was disconnected only about 200 songs were actually on my iPod.
    I've restored it several times.
    Seems to "freeze" on random songs or videos and will not continue to sync, even theough the iPod says it's syncing.  Then iTunes freezes.  I have to "force quit." Sometimes (but not all the time) if I try to re-open iTunes, I get a message that says iTunes is locked.
    I thought maybe my cable was bad (it was the original that came with the iPod).  I actually spent $20 and got a new one.  No luck. 
    With the new cord iTunes now gets frozen on the 3rd or 4th song it is trying to transfer. Once I disconnect the iPod (I have to disconnect with ejecting because iTunes is frozen and it also freezes up Finder to eject) my iPod makes an awful click sound and I have to start it by toggling and then holding the play/pause button.
    I have tried enabling disk, manually controlling music, etc. but nothing helps.
    I am sick about it because I rely on my iPod a lot for my job-- and I can't afford a new one since I just bought a MacBook.  I think it has something to do with the fact that I got this new MacBook.  My old PC was getting so sensitive that I didn't download the latest version of iTunes (but I still had the second latest version).
    Any help is appreciated.

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • IPod will not sync with Itunes since updated to 7.2034 error 1418

    The IPod still works when not connected to PC but when connected an error message comes up that it is corrupted and will need to be restored. When this attempted error 1418 eventually appears.
    I have tried by resetting the Drivers in windows - updating didnt work so deleted and restored USB Mass Storage Drivers
    Have set up and run the appleipod.bat still didnt work
    Have tried to reformat IPod as a drive but I couldnt get that to work but that might be how I attemted it. using "Run" Format g:\(g being the Ipod Mass Storage drive name)
    One other point is that the Ipod has lost its name
    So does any one have any other solutions

    Thanks deggie
    I have been to the local apple store in the end and they tried on a Mac, the IPod worked OK, and then they used a Mac in XP - the connecton was very slow but worked also. Their surgestion Copy Itune files to extenal hard drive and reinstall Itune again. Copy back music before running ITunes
    This worked and all back to normal. It therefore was a problem with corrupted Itunes in windows. The Ipod is now listed in My Computed correctly as well now.
    Thanks again for help

  • After the ios6 update, iTunes will not sync with my 4s, it gives me an error about not being able to identify which apps are on my phone.

    I have the latest iTunes software.  I did notice that alot of my apps on my phone aren't there anymore after the update.  Any suggestions?

    Howdy Susiesdad,
    I would suggest the troubleshooting steps from this article named Troubleshooting printer issues in OS X found here http://support.apple.com/kb/ts3147
    Don't let the name throw you off, the troubleshooting is relevant for scanners as well.
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    All the best,
    Sterling

  • My ipod classic 80 gb will not sync contacts form Outlook in windows 7.  I have tried many suggestions but none work.

    My ipod classic 80 gb will not sync with contacts in outlook in windows 7. It never has synced all contacts but for a while it would sync "All Contacts" if I created a distribution group in Contacts for that purpose.  Now it will not even do that. What can i do ?

    Hi there,
    I would recommend reviewing the process for setting up syncing in iTunes 11. Take a look at the article below for more information.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    If the issues persist then you may want to take a look at the trouleshooting steps found at the website below.
    iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    -Griff W.

  • A youtube movie clip will not sync with Ipod classic

    I downloaded a short movie clip from youtube using Vdownloader. The clip downloaded to my movies in Itunes.
    However it will not sync with my Ipod classic, and comes up with the error message "the olympics opening sequence was not copied to the Ipod, because it can not be played on this ipod."
    Previous movies using Vdownloader have copied to the Ipod okay. I am running on Windows XP.
    Any help would be appreciated.

    Let's just say that if your mvies are rent or bought, they are possible for snycing on your classic, but if they are downloads they won't be able to sync on your classic...
    Rage Rex

  • My ipod classic will not sync with windows 8

    I have an ipod classic that will not sync with my new laptop which has windows 8 installed. When i plug it into my laptop it doesn't show up in itunes or my computer. I tried it with the ipod in disk mode, and it still won't show up in itunes, but does in my computer-however when i click on it my computer freezes so i have to unplug it.
    I've been through several forums already, and have tried uninstalling and reinstalling itunes, updating my drivers, renaming the driver that the ipod plugs into, all with no success. I used to have a similar problem on my old laptop, but this could be cured by right-clicking on the ipod in my computer and clicking 'format' - my ipod would then be wiped, but itunes would then recognize it and i could sync everything back onto the device-it was time consuming but it worked.  However i am unable to do thisnow as the ipod either doesn't show in my computer, or freezes my laptop when i do finally get it to show in disc mode.
    Can anyone offer any advice at all???

    I have an ipod classic that will not sync with my new laptop which has windows 8 installed. When i plug it into my laptop it doesn't show up in itunes or my computer. I tried it with the ipod in disk mode, and it still won't show up in itunes, but does in my computer-however when i click on it my computer freezes so i have to unplug it.
    I've been through several forums already, and have tried uninstalling and reinstalling itunes, updating my drivers, renaming the driver that the ipod plugs into, all with no success. I used to have a similar problem on my old laptop, but this could be cured by right-clicking on the ipod in my computer and clicking 'format' - my ipod would then be wiped, but itunes would then recognize it and i could sync everything back onto the device-it was time consuming but it worked.  However i am unable to do thisnow as the ipod either doesn't show in my computer, or freezes my laptop when i do finally get it to show in disc mode.
    Can anyone offer any advice at all???

  • Ipod classic will not sync with tv shows

    except for only one but none of the other shows are syncing, Ipod classic will not sync with tv shows except for only one but none of the other shows are syncing. I have them checked but they still wont sync.

    Are you getting any error messages during the sync process? If not, reset warnings on the iPod by right->clicking on it from under Devices in the left hand pane of iTunes and selecting Reset Warnings.  Then resync the device. 
    B-rock

  • HT1369 Please help, I have just bought 3 tunes from itunes, but they will not sync with my ipod? Any idea why?

    Anyone any ideas, I have just purchased 3 tunes from itunes, but they will not sync with my ipod.

    https://discussions.apple.com/message/23071575#23071575

Maybe you are looking for

  • Error while deleting recipe

    Hi Experts, I am getting the following error "Task list 50000159 01 (type 50000159) is still used in inspection lots" while deleting a master recipe using t code C298. Please note I am note getting any inspection lot where this recipe group is used (

  • My Experience Today

    I would like to start out by stating that before today I have been treated well by most representatives from Verizon Wireless.  But after today's experience, I can honestly say I have never been treated with more disrespect or dealt with someone who

  • Would I have tighter control with TFS as opposed to Visual Studio Online?

    We have developers from all over the world and I want to make sure that our code which is our company's intellectual property is as secure as possible. We're currently using Visual Studio Online but a potentially disgruntled developer can log into VS

  • OutOfMemoryError in UIX/BC4J Application

    Hi there, in have an application that runs fine in JDevelopers embedded OC4J and on IAS running on Linux. When deployed to an IAS running in HP-UX it simply seems not to start, but if found in the application.log, that an OutOfMemoryError occurred. W

  • Passing paramaters to form on start of responsibility

    A past consultant made an additional responsibility called "release multiple sales orders" which does not require a sales order number like the seeded sales order release form does. When I checked the form names and versions I found they are they sam