TS1372 I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives. If that info is true, the question is, do you have a compatible combination of logic board and hard drive?

Similar Messages

I recently replaced the hard drive in my Ibook but am having trouble loading OSX onto the disk. Using Mac install dics 10.5.2 but won't book up. Any one have suggestions?

After replacing the hard drive and memory in my ancient Ibook I tried to install OSX from older install dics- OSX 10.5. Pressed C key after putting in the disc and started up the computer and just get spinning clock and a bunch of whirling from the disc drive but no boot up. What am I doing wrong? Am I missing a disc or is there some other magic that I'm not aware of? I could really use some help on this one.

Here's the proper sequence of events:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.

Help with "The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written. (Error code -36)" Any ideas on how to fix this?

While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.

That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library.

HT4623 I was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Or it could be an Apple problem and you will have to wait.

My hard drive on my Mac Book Pro failed last week. I replaced the hard drive today and had to use my snow leopard disc that came with the computer to get teh thing going. I was running Mt Lion which I had purchased last year on the old dr

The hard drive on my Mac Book Pro failed last week. I just put a new Samsung SSD in this thing and had to load the Snow Leopard OS that came with the computer. I had Mt. Lion on the old drive that I had purchased last year but no boot disc made. I have made several attempts to get the Mt lion soft ware on the computer but the Apple store does not have it only mavericks but my Snow Leopard version is too old for it so I cant get it either. How do I get something to run the software that I had on the old drive?

Unfortunately I lost my life and am trying to rebuild. Isn't the technical era great.
Backup, backup, backup
As a minimum, use 3-2-1 (or even more)
3 copies of your data (original copy counts as 1)
2 different backup utilities/storage formats (protects from bugs in the software)
1 copy off-site (protects against theft, fire, and natural disaster)
More backup copies are even better.
Backup disks are cheap compared to the lost of personal data that does not exist anywhere else.

Is it the hard drive? and battery? What's up with my specs? 3 threads?

My battery had not been fully recharging for a while. For weeks, it would "max out" at a lower percentage, lowering incrementally pretty much weekly. No, I am not eligible for the recall.
One fitful night, I came home to a shut down computer. When it powered on, I heard a very loud hard drive and saw a prohibitive sign, the "no smoking sign" as I called it. After several such attempts, I went for the included in purchase CDs, which I hadn't seen since I bought it/
I can start from the restore CD and have faced some varying results.
Most of the time, I can't see the hard drive as an option to install Mac Os X 10.3 ish. Once, I was able to see and select the hard drive. All got stuck after it told me that I would have to change installation options since I had a newer version of Mac Os X. (I read in maxoshints that someone uses his freezer and toaster to manipulate temperatures in order to rescue data from Mac hard drives.)
Both Startup Disk and Disk Utility saw the hard drive that one time since the fitful night.
An Apple store "Genius" had agreed with me that the hard drive was busted, but now I can see 74.5 GB TOSHIBA MK8025GAS in the list on the left. It does not show any volumes under it, like the 3.9 GB CD does (iBook Software). I can "info" and see that it even has a device tree.
I cannot drag and drop to Restore. RAID and Partition do not seem to apply.
Erase seems my best option and it seems to have been able to "write zeros" but not "8 track randomize."
...I am now trying to "partition" and I can see the progress bar waving, not progressing. Clicking on other tabs makes them flash, but not dominate the window. I am able to use the menu bar and quit, which prompts me that I am interrupting. The screen fades and the computer stops making noise after a long time, but still no progress.
Please advise. What should I do? What can I do? I have begun trying to learn about hard drives, but find the technology convoluted. I can't sort out my choices.... for example, when I try and look up my specs, I can't find an A1054 on apple's website. There's a M9623LL/A .
I'm typing this on a M9846LL/A, which is actually an A1133?!!?
The A1054 is a refurb, but the A1133 is not.
Bonus points for helping me understand, progress toward goal of working computer!

Welcome to the Apple Discussions!
My battery had not been fully recharging for a while. For weeks, it would "max out" at a lower percentage, lowering incrementally pretty much weekly. No, I am not eligible for the recall.
Besides your other issues, it may simply be time for a new battery. The batteries not only have a limited number of complete charge cycles, they also have a shelf life that could expire even if you've never used it. Here is a little bit of information from Apple on batteries:
http://www.apple.com/batteries/
http://www.apple.com/batteries/notebooks.html
As far as your hard drive is considered, I'm guessing you don't have an AppleCare Protection Plan? It really does sound like the hard drive is failing. Have you started up from your Apple Hardware Test disk yet and run the extended tests?
If you decide to replace your hard drive that's out of warranty, you just need a 2.5" IDE/ATA hard drive that's less than 9.5mm tall. (This is a standard configuration for notebooks.) While it's possible to install yourself, it's quite the operation and you may want to take your iBook to an Apple Authorized Service Provider to do it for you. Or you might consider sending your iBook in to a service like MCE Technologies to do it for you.
-Doug

I replaced the hard drive in my wifes dv6.where can i find the factory drivers to restore her laptop

It is a DV6-2157wm running windows 7 32 bit. We dont have the restore disk for the computer, and I didnt create one before the hard drive went out.
This question was solved.
View Solution.

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I want to replace the hard drive on my IMac but want to know how to transfer from the time machine external hard drive to the replacement drive?

I have reached capacity on my IMac hard drive. It is a 250 GB drive. I have an external drive backing up using the time machine utility. My question is once I replace the HD on the IMac, how do I load the new drive with the back up from the external drive?

So many possibilities.
I am not an expert, but I have learned this much is doable:
Buy an external enclosure to re-use you old drive.
Buy a new external drive at least as large as as your intended new internal drive. Make it self-powered.
Download CarbonCopyClone (free download, relatively small).
Make a CCC clone of the original disk on the new external disk
Install the original disk in the external enclosure.
Install the new disk in the main system.
Boot from that new external drive that has the carbon copy clone. CCC will be installed on it and it will be bootable.
Use CCC on the external to directly clone back to new drive you install in the main system (the "bootable" flag will copy).
NOTE THAT AT NO TIME IS YOUR ORIGINAL DISK BEING OVERWRITTEN IN THIS PROCESS. YOU CAN ALWAYS GO BACK AND REINSTALL IT.
Step 1 makes your old disk resuable as a spare copy for "anything".
Step 2 gives you something to use as CCC for after the recovery process.
Step 3 gets the software needed for cloning
Step 4 makes a bootable saved copy of your current system
Step 5 shifts your old disk to a usable place
Step 6 positions your new disk
Step 7 boots your existing install of OSX (just from a different drive)
Step 8 puts your original install on your new disk.
Now you have a bootable larger hard drive, and a bootable copy on a drive large enough to save all you can store on your new internal drive. And you have your old disk to use for "anything".
Now you have TM backup in one place, and CCC backup in another.
Two backups is better than one, and one of your backups is bootable in case of system failure.

Can not restore my iPhone 4 with error code 1611 and can not activate it to work too.

My iPhone 4 can not be activated and when I tried to restore it with itune there is error code 1611 about hardware issue.If anyone ever had the same problem please help.

Have you googled to see what the error code means? Perhaps that will give you a clue as to how to solve your problem.

My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?

My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?

Peace Lilly wrote:
... Will I loose everything if I connect the iphone to the itunes as a new device?
To avoid that...
See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

HT204053 I recently replaced the hard drive on my Windows 7 computer and lost all of my music content. It should be on the iCloud, however. How can I get it back to iTunes? Can I "reverse-synch" and send it FROM my iPhone TO my computer?

I recently replaced the hard drive on my Windows 7 computer and in the process lost all my music. I think it should be on the iCoud. Can I get it back from the iCloud to my computer? Or can I "reverse-synch" FROM my iPhone TO iTunes?

All the music you purchased from iTunes can be re-downloaded, all the music you acquired without purchasing from iTunes can be accessed using Senuti (not free). The combination of these 2 will get your music back.

HT1386 Ever since I had to replace my PC hard drive, my outlook contacts and calendar no longer sync. It acts like it's syncing, but it isn't. I now have two hard drives - c and g, but I'm pretty sure the Outlook data is still on c. Any other ideas?

Hello - I just had to replace the hard drive on my pc, and now my Outlook calendar and contacts won't sync to my iphone 5s. I ended up getting two hard drives (C and G), so I'm afraid that might have something to do with it - although I'm pretty sure Outlook files still live in the normal place on C. Itunes sync acts as if it's working, but nothing changes on my phone. Any ideas? Thanks!!

"2MEM/1/4: DIMM3/J14"
Replace the memory in the DIMM 3 slot.
If you are running Mac OS X 10.5 you can use this program to test your G5's memory:
http://www.kelleycomputing.net/Rember/
It will subject your RAM to a more thorough test than Apple Hardware Test.

After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and itunes, it seems that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior..

After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and my ipod (Classic 160gb) it would seem that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior to the original harddrive's failure for Tiger OSX 10.4.11
Any ideas on the subject would be most helpful
Thanks in advance
Dingoh

The last security update released for Tiger users was the 2009-005 update. The latest version of QuickTime is 7.6.4. The last version of iTunes that can run on Tiger is 9.2.1, because 10.0 only supports Mac OS X Leopard and later.
So, are you on version 9.2.1?
Was it Tiger or Leopard you had on the drive before?
iTunes 9.2.1 download...
http://support.apple.com/kb/DL1056

I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. H

I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?

make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
copy the installation files to a desktop folder and install from there.

TS1372 I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

Similar Messages

Maybe you are looking for