TS1372 restore Ipod that is busy

How do I restore my Ipod nano if it's "busy" and I can't access it?

Place the iPod in recovery mode and then connect to your computer and restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Similar Messages

  • TS1372 restore ipod nano

    I can't restore the ipod nano. I got the message via Itunes that the ipod couldn't be restored because it is busy.

    You're welcome! Happy to help. Glad it worked.

  • Updated to 9.03 now cannot restore iPod that crashed

    I updated iTunes today to 9.0.3 on my PowerBook G4. Then I tried to update my iPod touch to 3.1.whatever. iTunes immediately crashed and then my iPod crashed and I have to restore to factory settings. Now, I cannot restore my iPod on this PowerBook but it's the one that has the iPod backup and the latest iPod system (my other Macs can only update the iPod to 2.2). Every time I get to the stage where it extracts the program (3.1.whatever), iTunes crashes. I am stuck in a loop of crashing. I cannot restore the iPod because iTunes crashes every time I try it. I don't know if it's an iTunes or iPod issue, but I'm thinking it's more of an iTunes problem than an iPod problem. I really need help!

    I am having a similar problem. iTunes won't let me update or restore my iPod. It just says AppleMobileDeviceHelper quit unexpectedly and iTunes was unable to load dataclass information from Sync Services.

  • How to restore ipod without updating to itunes 7.0

    How can I restore ipod that uses itunes 6.05. I do not want to update to itunes 7.0 since I tried that recently with disasterous results.I want to stay in 6.05 and start over with my ipod.
    Compaq   Windows XP Pro  

    Do you have the previous updater on your computer? Check in start/all programs/iPod/iPod updater.
    If not, look here.
    http://www.versiontracker.com/dyn/moreinfo/win/26925

  • TS1372 "ipod cannot be restored because it is busy." what next? (ipod classic 16oGB)

    My ipod classic (160GB) lost all data. I tried to reset it but got the following mesage: "ipod cannot be restored because it is busy."
    What shall i do next?

    sell it on ebay, you can get $80 for it. Then get an iPod nano 5th gen that can hold however much memory you have, the most I ever needed was 32.

  • The iPod "iPod" could not be restored because it is busy

    My 20g ipod started giving me trouble a few weeks ago after I loaded some post-Christmas purchases. It wouldn't load the last few songs, and it was half-empty, so capacity wasn't an issue.
    I next tried to restore the iPod, but my mac mini then seized up, and the restart hung, so I had to do a hard restart.
    Upon restart, the iPod was obviously now corrupted, with only a half-completed restore, so I tried again.
    This time, and every time since, I get the following error message: The iPod "iPod" could not be restored because it is busy
    So, I next followed the 5 R's, to no avail.
    Disk Utility gives me the error Disk Erase failed Disk Erase failed with the error: Input/Output error
    I also tried security erase, and while it starts with the overwrite, it eventually kicks out of the process with another I/O error.
    Today, I downloaded iTunes 7.6 with the hope that it would fix this issue, as it has been surfacing in discussions pretty commonly. I thought this was reasonable, because of some difficulties with iTunes after the release of the iPhone were solved upon the next release of iTunes.
    Unfortunately, I am facing the exact same situation.
    There is one additional step I was able to take by trial and error, and one further step I am considering.
    When I originally searched this topic, I came upon a "diagnostic mode" fix that's supposed to be accessed only by the iPod nano.
    Using this mode, I was able to run several tests, and ram checks out, and one of the two disk tests come back fine.
    Since I don't know what the alphabet test results mean, this was about all I was able to gather.
    I attemmpted to use the diagnostic mode reset, but the problem continued.
    My final thought, aside from waiting for a further iTunes update, was to dig out a third-party disk utility I have here somewhere and see if that will erase the iPod.
    Any suggestions out there?

    I was able to solve this by (warning, this will void your warranty) taking the iPod apart, very carefully. Being careful not to separate the cables inside, place a folded business card on the hard disk, and place the metal half back on.
    Do a Google search if you don't believe me.
    Oh, and for the gent from Apple that removed the post containing URL with pictures of this fix, I do NOT receive any cash, complensation, self esteem or other recompense or good feeling from posting this fix, or directing people to search for it.

  • What do I do when I get the message "the iPod could not be restored because it is busy?

    Hi...I'm trying to restore my iPod to the orignal factory settings, but keep receiving the message that the iPod could not be restored because it is busy.

    Since it seems that you will have to erase the contents of your iPod anyway (restoring it will do that), then I would hit the problem with a bit larger hammer. Connect the iPod to your computer, and if iTunes opens automatically and shows you the iPod summary page, then disable the option to open iTunes automatically when the iPod is connected. Apply the change, if necessary, then quit iTunes. Open Disk Utility (Applications/Utilities/Disk Utility) and select the iPod from the list of disks in the sidebar. Click the Erase tab, and enter a name for your iPod. Uncheck the option for installing OS 9 drivers, and choose Mac OS Extended (not journaled) as the disk format. Click the Erase button to erase the iPod. Quit Disk Utility when the process has completed successfully. The iPod should now mount on your Desktop as a generic white-colored removable disk icon.
    Now, launch iTunes, and your iPod should be recognized as a new device. You should now be able to restore it and sync it with your iTunes library.
    P.S. Yes, I have done this with my own iPod .

  • Am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, the iPod could not be restored. An unknown error occured (-1).

    Hi , I am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, "the iPod could not be restored. An unknown error occured (-1)." I would appreciate if anyone could let me know what the problem is and if it is possible how to fix it? Thanks

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS3474 iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

    What do I do about this message? I've restored it 3 times, but this message still comes up, and i cannot put music on it now.
    iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

    Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.

  • When I connected my iPod to make a playlist, I got a message saying that iTunes had "detected an iPod that might be corrupted" and I could disconnect and try again- which hasn't worked- or restore.  Any thoughts?  I don't want to lose all of my playlists.

    I just connected my iPod after opening iTunes to make a playlist and repeatedly have gotten the message that 'iTunes has detected an iPod that might be corrupted."  I can either disconnect and try again, which I've done multiple times to no avail, or restore.  I don't want to lose the dozens of playlists, so do I have any options that anyone knows of?
    Thank you.

    What iPhone do you have? You can check in settings>>general>> about.
    If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
    If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

  • I lost all my playlists trying to download I tunes 8 and becuase It deleted them from all my devices becuase of music match.  I have an Ipod that still has all the playlists can I restore them from that device?

    I lost all my playlists trying to download I tunes 8 and It deleted them from all my devices becuase of music match.  I have an Ipod that still has all the playlists can I restore them from that device?

    Hello!
    Do you have a Mac computer with Time Machine backups?

  • HT4946 I was attempting to restore old that was once on an Ipod to my Iphone. I selected backup for previous and all of my current information ( pictures, texts, contacts, etc) have been deleted or lost. How can I get my old information back?

    I was attempting to restore music to my new IPhone. The music was once on an Ipod that I had. I selected backup restore thinking I would get the music. I lost all my contacts, music, pictures, text messages, and everything. What can I do to get back the items lost. Please help???

    Restore an iPhone backup.

  • HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer

    How do i restore an ipod that has been disabled and has never been conected to itunes

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I have a 2nd generation iPod that only displays an image of the cord, and an arrow to connect to iTunes. I've done this and it says it needs to be restored. Tried that but I get an error: 1611.  Any suggestions?

    I have a 2nd generation iPod that won't do anything but display the Apple logo for a brief second then an image of the cord suggesting it should be connected to iTunes. I tried to restore it via iTunes but I get an Error: 1611. It does nothing else.  I tried turning off using both buttons...nothing. Any suggestions?

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    Above from:
    http://support.apple.com/kb/TS3694#error1611
    Note it could be a hardware problem

  • I have a disabled ipod that will not restore with iOS7

    I have a disabled ipod that will not restore with iOS7

    What exactly happens when you try to restore via iTunes?
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Maybe you are looking for

  • Quicktime problem "buffer overrun detected!"???

    sorry if thas has been posted a billion times recently, but i seriously am not that good with computers and can't seem to find a place for help with this. was hoping you guys here could at least point me in the right direction. Also, like i just said

  • Unable to playback project in full screen

    unable to playback imovie project in full screen.  Full screen button and commandG both do not work.

  • Is there any way I can re-edit a finalised DVD?

    I watched a DVD recently that I created on iMovie four years ago and decided that I would like to tweak it in order to improve it- now that i'm more proficient with iMovie. Is this at all possible to do with a finalised disc? There has to be a way in

  • Add checkbox on the nodes of Hierarchical tree in oracle forms 9i

    Hi, I am working on oracle forms 9i.I have to add checkbox at the place of node(+/-) in Hierarchical tree so, that user can select or deselect the Tree.That can do in oracle forms but how i don't know. can anybody help me..... Regards, Hemant

  • Need to add the field on the MIRO screen...!!!!

    Hi All, Customer has a requirment to add the one field under the 'Details' tab of the MIRO screen. I tried searching Screen Exits for this, but no success.. Is there any OSS note for this which can serve the purpose? Thanks in advance. -Sanjay