TS1382 adjusting volume so all songs play at same volume

how do you adjust the volume on your ipod so that all songs play at the same volume.

I as I am sure many of us have this very same ISSUE.
Come on you guys chime in on this problem!
Help us! We're going crazy with this volume issue

Similar Messages

How to control volume so that all songs play at the same level

using itunes 11.4. How do I control the volume so that all songs play at the same level?

GO to the preferences in itunes or press (cmd+,)/playback and turn on sound check. If you want to same in other ios devices go to settings/music/sound check turn on

HT1399 How can I modify my playlist so all songs play ay the same volume?

How can I modify my playlist so all songs play at the same volume?

mlagrandeur wrote:
How can I modify my playlist so all songs play at the same volume?
Turn on iTunes Sound Check, which you can do by going to Edit > Preferences > Playback and checking the box.
Let us know if that does the trick. If by any chance it does not, use the 3rd party program iVolume.

I had to reload all my programs after a hard drive problem. Now certain songs are skipped over or only play for a sec or 2 then it jumps to next song. all songs played before. Some are Itune bought and some are my old music.

I had to wipe my hard drive clean and reload all my programs. After reloading Itunes, I noticed that some songs will not play, they are skipped over, or the songs plays for 1-2 secs then it skips on to next song. Any ideas what I did wrong? All songs played before and some of affected songs are bought, some are my old library I copied off of CDs

TimT wrote:
I had been thinking that the hard dri've is starting to fail on me but then I thought about the fact that, If I play an MP3 and the player freezes up or starts jumping through the mp3 file, Then I restart the player and start the same MP3 agian and this time it plays normally, Is it really a hard dri've problem?
Could be a lot of things unfortunately, from corrupt firmware, corrupt format on the disk, a problem with the mainboard, or a problem with the hard disk.
I figure that if the hard dri've was damaged it would always freeze up on the same file at the exact same point in the music wouldn't it's
Not necessarily. It could be just an intermittent fault.
I want to Format my Zen Touch and reload the Firmware to start from scratch, but I first want to backup my 28 GBs of MP3 and WMA files. However I noticed that when I transfer the files to my hard dri've, all the ID3 Information is gone. Now adding ID3 info to 28GB of files will take days!
Strange. Did you edit the tag data on the player? If so what happens is the tag data changes are made in the Music Library but not in the files themselves. There's only one way to write the changes back and this involves getting a copy of MediaSource 3. You then transfer the files back to the PC Music Library, and use an update function to update the files (the PC Music Library will have the same tag data as the Music Library on the player). One problem is that MediaSource 3 is very large, and not available from Creative as a download. I can try and get a copy to you if you can't find it elsewhere.

I just downloaded The Rolling Stones Hyde Park concert from ITunes. All songs play, except Street Fighting Man, which I am supposed to authorize on my computer, but after doing so, it still doesnt work. Why and what can I do.

I just downloaded The Rolling Stones Hyde Park concert from ITunes. All songs play, except Street Fighting Man, which I am supposed to authorize on my computer, but after doing so, it still doesnt work. Why and what can I do.

Hi,
Probably corrupted on download. Delete from library and go to iTunes Store > purchased and redownload.
Jim

I added music to a project in iMovies. I wanted to delete the music I put in,but could not figure out how to delete the music. I also had two songs playing at same time. How do I delete music from project in iMovies?

I added music to a project in iMovies. I wanted to delete the music,but could not figure out how. I also had two songs playing at same time. How do I delete music in project and how do I prevent two song playing at same time?

Select your Music Track so that a yellow border is around it. Then hit the Delete Key. Alternatively, hit EDIT/DELETE SELECTION.

Any new technology for volume adjustment so all songs sound the same?

It's the age old question about volume adjustment and playback - when all songs sound different. And we all know the sound check feature doesn't work that well - especially when you have songs in different bit rates. I play my iPod over a very large sound system and the differences in volume are shocking.
It doesn't look like anything works, after all these years. Someone recommended putting ALL the songs up to 100% in the volume adjustment ... but that can't possibly work, can it?
Have there been ANY improvements in sound adjustment??? Or am I still stuck adjusting each song myself?

Are you speaking from experience? From what I've seen, it's 30 bucks ... with mixed reviews. I use the iPod for broadcasting over a large sound system - maybe it's not the way to go (as some have recommended NOT using iPods to broadcast over public places) - but is there ANY foolproof method? If iVolume does, indeed, work ..... I have no problem shelling out $30 for it. Or is the human ear still the way to go??? (I currently, painstakingly, adjust each song - one by one!)

Just upgraded to 2.2.1 and not all songs play

On my iPod Touch, I just finally upgraded the software from 1.x to 2.2.1. Now, only a few songs will play. Others appear to play but there's no sound. Odd thing is, it's like my last 3 or 4 purchases that play (some songs and one album--going back about a month) but older purchases do not play (only have purchased music, no imported CDs on the iPod).
Has anyone else experienced this? I'm not really sure what to do. Am going to synch it to remove all songs then re-synch them back on, but didn't know if there was a better solution.
It seems like I'm reading that 2.2.1 is a little buggy, I'm wondering if I will run into other problems as well.

I would simply restart the touch and, if that didn't do it, a reset.
Restart: Hold the Sleep/Wake button down until you see the red slider and turn the touch off. To restart it, hold the Sleep/Wake button until you see the Apple logo and then let go.
Reset: Hold the Sleep/Wake button and the Home button down together for about 10 seconds. When you see the Apple logo again, let go.
FYI - 2.2.1 was a minor update to fix a few little things. It is only buggy in some people's hands. Most of us have experienced no problems.

I just download an album into iTunes, all songs play fine on iPad, iPhone, but on my Mac there is one song that only plays 10 seconds and then skips to the next song. How do I download onto my Mac again?

I just downloaded an album into iTunes, all songs on album play fine on iPad, iPhone, but on my Mac there is one song that stops 10 seconds into it and then moves to my next song. Can I download this song again? How?

Other people have been having similar problems with songs over a number of days.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

Ipod nano (6th gen), appears under devices in itunes and all songs play properly. Upon ejecting from PC, ipod says 0 songs but still 14gb/14.88 have been used up. What is the problem here?

Pretty much what I asked in the question. Plugged the ipod back into the PC and it still works fine under Devices in itunes and all the songs re-appear here again. Havent been syncing with any different computers

I requested that your post by moved to the iPod Nano forum. This is the iPod touch forum.

IPod freezing and not all songs play

My ipod freezes and cannot unfreeze until battery goes low. How do I get this problem fixed? Also, after I download a song and transfer it to my ipod, the ipod doesn't always play the song. It may play a few seconds, but that's it. I try to redownload the song and the ipod still won't play it. Need help with this thing!!

I would highly suggest "Restoring" your IPOD using the IPODs Updater software. Read here:
Restoring iPod to factory settings:
http://docs.info.apple.com/article.html?artnum=60983

Does anyone know how to keep all songs in the same album when they say featuring someone?

Each time I load a CD onto Itunes that has an artist who features another artist on that particular song, it puts it in my library as a separate CD even though it will have the same album listed. For instance Lady Gaga's song just dance features Colby O'Donnis that song is in its own spot while the rest of the cd is together that one song is separate and I don't know how to keep them all together. Someone help.

Get the Informations for that song and have a look in the "Sorting" area if there is something different. The data inserted there is just for how iTunes will order the songs.
If the Interpret in the general informations is "Lady Gaga" and in the sorting area is "Lady Gaga feat. xxxx" than you'll see Lady Gaga as the interpret but it's sort to a second entry "Lady Gaga feat. xxxx".

How can I kepp all songs on the same album?

Some of my albums that have duets on them will show up as multiple albums when they were ripped from the same CD. Is there a way to make them all under the same album cover. I also have some artists that under an artist search will show up with multiple different headings of the same artist. I'm using the Ipod on a Kenwood car head unit.

I add it to the title as I've described, i.e. *Title \[Feat. Guest\]*. This means that all the information is still visible when playing the track in iTunes or on the iPod and can also be used when searching.
To fix things I set my library up in List view with the browser turned on and the columns arranged so that I could see both Artist & Album Artist. I then selected the first album in Album section of the browser to show it's tracks. Pressing the down arrow on the keyboard shows the next album. A brief glance will reveal if some tracks of the album have different artist values, in which case these can be fixed before moving on to the next album. It should take less than a second per album to confirm that it is properly formatted as your eyes will rapidly notice any inconsistency in the artist column. The process is only time consuming when you actually need to make some changes.
If two different artists have albums with the same album title, e.g. Greatest Hits, this also shows up when working methodically through this list. I've chosen to rename the albums in the form *Album - Artist* as this separates the albums, makes it clear in the browser which album is which and puts them in artist order. Another approach is adding different numbers of trailing spaces for each different album.
tt2

I changed all songs to the same artist by mistake ...help!

I accidently changed all my 712 songs to have the same artist. Is there a way to fix them back without manually typing in each artist?
My son says i can use idump to put the songs from my ipod (which are correct) into a file, then load them into itunes.
Thanks.
Mike

My son says i can use idump to put the songs from my ipod (which are correct) into a file, then load them into itunes
Yes.
Were these songs RIP'd from CD using iTunes?
If so, select them, then menu Advanced -> Get CD track names.

GB saves all songs by the same name.

I am recording sermons at my church that are made into podcasts and put on our Facebook page. I can save the sermon by the proper name and there is no problem with this task. But, when I share the song to my iTunes library it always saves the sermon by the name of the first sermon I produced. I have to put the name of the sermon in the album title so I can find it and rename it. Then, I uloaded these sermons to the iTunes Store and it picks up the name of the first sermon as well. Where do I go to change the name of each title I save in Garageband? When I share the sermon to iTunes a form pops up, but there is not a blank to insert the name of the sermon.

GarageBand will use the filename of the GarageBand project as the name of the song title in iTunes. The general idea is, that you create a new project file for each song. Do you use the same GarageBand project file for each new sermon over and over again? Then rename the project.band file in the Finder to reflect the name of the sermon, before you share the project to iTunes.
Regards
Léonie

TS1382 adjusting volume so all songs play at same volume

Similar Messages

Maybe you are looking for