TS1382 My 160GB iPod screen shows a red x with a red circle around it, what can I do?
My 160GB iPod screen shows a red X with ared circle around it, what can I do?
Hi there kodi_abbott,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPod Displays a Red "X" Icon
http://support.apple.com/kb/ts1463
-Griff W.
Similar Messages
-
TS1369 My ipod has a red " x " with a circle around it.What can I do ?
Question : My ipod is not recognised by my computer anymore when I plug it into itunes.The ipod has a red " X " with a circle around it. Is there anything I can do to get past this problem and start using my ipod again ?
iPod Displays a Red "X" Icon:
http://support.apple.com/kb/TS1463 -
I have a new ipod touch and it shows I have a wi fi connection, but I am not able to connect to the internet.
Any suggestions?Try this first. In Settings > WiFi: Turn wi-ff, then turn it back again. If this does not work try Settings > General > Reset > Reset Network Settings.
If you have never been able to connect and are using WPA security, make sure your password is correct. If you are using WEP security, you're wasting your time as WEP is hackable in less than 30 seconds. And the iPod often has problems with WEP.
In any case, if you can't get it to work at home, try it in a place with free wi-fi. If it works there the problem is probably with your router (this can be the case even if your router works with other equipment). -
I set up iCloud on my iMac with OS version 10.6.8 but I'm not able to have the iCloud icon show in my Dock with the other application icons. What can I do? Is it because iCloud is not part of the 10.6.8 version? I clicked System Preferences and I saw MobileMe and no iCloud.
Thanks for your reply! Would my IMac be able to support the Mavericks (10.9) considering that I bought it in June 2011? Not sure if that even matters.
-
My ipod screen shows "not enough storage" message but will not let me click on the cancel or settings button. How do I fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
my bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign ), i think the battery drained and switch it for charging but it will show only not charging sign . i bought this phone before 9 months, whats the solution for this ?
Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
my ipod screen shows " this ipod touch hasn't been backed up in 10 weeks .backups happen when this ipod touch is plugged in locked and connected to wifi" ipod screen is locked and not opening .any solution
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then go to Settings>iCloud>Storage and Backup and either turn off iCloud backup or backup to iCloud -
IPod screen showing only USB cable to be connect to iTunes after Update and Restore.
My 4G iPod model no is A1367 and the software version is 4.2.1, so as it’s a very old version i wanted to update the software to iOS 6.1.6, so I have taken backup, then Update my device with iOS 6.1.6 after that I tried to restore my device, it started to downloaded (847.8 mb) iOS 6.1.6 again and again and iPod screen showing only USB cable to be connect to iTunes. please tell me how should i resolve it.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device... Re-Sync your Content -
ipod screen show the apple
Try here:
iPhone and iPod touch: Frozen and unresponsive
iPod touch: Hardware troubleshooting
BTW, there is no 5th gen iPod Touch. The latest/current iPod Touch is the 4G that was introduced in Sept 2010 and has the camera. -
HELP HOW TO MAKE IPOD SCREEN SHOW UP ON WINDOWS 7 LAPTOP!
Please help I want to get myh ipod screen to show up on my laptop but I don't know how. HELP!!!!!
I do not fully understand you question. If you mean you want to watch the screen of your iPod on your computer the answer is no. There are video-out connectors you can purchase for your iPod that will output VGA, composite and component signals. If your laptop can accept such a signal you can see the TV output on your laptop. However, the output does not mirror the iPOd screen and it only works with apps that support TV out.
-
My screen shows a USB cable pointing to the ITunes icon. What is my next step? I can't do anything from there on.
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have an iPod with iOS 4.2.1 and would like to up date to version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?
You cannot update it if you can't get the latest version of iTunes. Actually, the latest version of iTunes will run in XP if you have Service Pack 2. Also, you posted in the iPad forum, and your profile shows you have an iPad, but in your post, you say it is an iPod. Is it an iPad or an iPod?
-
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
My iPod will show up in iTunes, but my iPad does not so I can't sync or transfere anything. Any ideas??
iOS: Device not recognized in iTunes for Windows - Support - Apple
Hope this helps.
Maybe you are looking for
-
Syncing only Address Book and Google Contacts - nothing happens?
I've been trying to set up Address Book/iSync to sync my contacts between Google Contacts and Address Book. I have the Google account information configured correctly in Address Book Preferences -> Synchronize with Google Account but when I go over t
-
Maybe this is best classified as a 'departmental cross post',... I have been trying to download a purchase of Flash Lite 2.0 for a Nokia N70 phone for two weeks now, but the online store is broken. Unfortunately I've spent over two hours on hold, acc
-
.nef Nikon D5100 is not displaying right in Camera Raw
Hello, these two images show the exact same .nef file being opened in two different programs. The first one with the blown out colors is opened in Adobe Camera Raw. The second one is opened in Nikons View NX 2 software. This is also the way I see the
-
Install problems with j2se 5.0
i can download the file but i cant get it to actually install on my computer im on a win 98 second ed. and need 5.0 for runescape play using Firefox as 1.4 is now too obsolete to run the game with any proficiency. and that offline when i try online i
-
USB camera problem - Error -2147024882 occurred at IMAQdx Open Camera.vi
Hi, I have just started to try and use a new USB camera (5MP) on LabVIEW and I am getting this error (Error -2147024882 occurred at IMAQdx Open Camera.vi) along with the message LabVIEW: (Hex 0x8007000E) Ran out of memory. =========================