TS1389 I have the error 42111 when I start iTunes.
Hello, I have the error 42111 when I start iTunes. I did not download a movie, I just installed the newest version of iTunes. I reinstalled but that didin't help. What can I do? I have Windows 8.
Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting
Similar Messages
-
I have the error 7456 when i try to send a video from my i phone to my appel tv? Any clue what the problem might be?
I can't believe it!! But this answers my question. I pair up quickly between my iphone5 and iMac, but cannot transfer pics from my iphone to the iMac over Bluetooth as I expeceted I would easily be able to do. After all, I did this with my old Mac and a simple Motorola cell phone years ago.
So, the answer is that file transfer from iphone5 is not supported. Really!!
Not sure why capabilites have regressed, this is disappointing, but thanks for the answer, at least I know to stop beating my head against the wall searching for some hidden box to check. This seemed like such an obvious capability between Apple devices I couldn't understand why I was having such difficulty. It seemed like it would be seamless, but it can't be done. Baffling. -
TS3694 i have the error (-42110) when i lunch the itunes how can i remove this error .. thanks
i have the error (-42110) when i lunch the itunes how can i remove this error .. thanks
Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes -
HT1803 i have the flashing folder when i start up my power book, i have no idea how to fix it
i have the flashing folder when i start up my power book, i have no idea how to fix it
Hi morales2k,
Here is a link for a relatively cheap OS that would be compatible with your Mac. Its a little old but will get you back on track. This is OS X 10.3
http://www.amazon.com/Mac-10-3-Panther-OLD-VERSION/dp/B0000E6NK9/ref=sr_1_1?ie=U TF8&qid=1384575314&sr=8-1&keywords=os+x+10.3
This is a newer version of OS X (10.4 Tiger). Its more expensive, but will get more updates than Panther...
http://www.amazon.com/Apple-Mac-10-4-Tiger-VERSION/dp/B0002G71T0/ref=sr_1_1?ie=U TF8&qid=1384575391&sr=8-1&keywords=os+x+10.4
This is the highest OS that the PowerBook can run, and is more expensive. The biggest advantage of this OS (Leopard) is that it will get the most updates available for PowerPc Macs...
http://www.amazon.com/Apple-Version-10-5-6-Leopard-VERSION/dp/B000FK88JK/ref=sr_ 1_3?ie=UTF8&qid=1384575583&sr=8-3&keywords=os+x+10.5
Any of these will get your Mac back to normal operation. Just insert the CD/DVD and follow the on screen instructions!
Good Luck! -
Hello All,
I have lost the ability to connect to itunes to update software and apps etc., My PC is giving me an error message of Ox800000A - apple says it may be a USB port problem. Has anyone else received this error problem and if so did you fix it and how?
The USB ports on my PC are working fine? Thanks in advance.Hi MarcusAH,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221?viewlocale=fr_fr#0xE800000a
About unknown error 0xE800000a
When connecting your iOS device, iTunes might display an "unknown error 0xE800000a" when the contents of your lockdown directory are unusable. Do the following depending on your operating system:
Windows XP
Disconnect all iOS devices from your computer, and quit iTunes.
Open My Computer from the Start menu.
Choose Tools > Folder Options in the file browser window then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
Click OK.
Navigate to the following folder on your computer, noting that the drive letter can vary depending on which drive letter Windows starts from:
C:\Documents and Settings\All Users\Application Data\Apple
Move the Lockdown folder to the Recycle bin.
Reconnect your iOS device and open iTunes.
Windows Vista or Windows 7
Disconnect all iOS devices from your computer, and quit iTunes.
Open Computer from the Start menu.
Choose Organize > Folder and search options. In the file browser window, then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
Click OK.
Navigate to the following folder on your computer:
C:\ProgramData\Apple
Move the Lockdown folder to the Recycle bin.
Reconnect your iOS device and open iTunes.
Hope this helps,
Mario -
I have an Iphone 3g, and when I wanted to restore so I could update my IOS system, it comes up with the Error 1015. If you know anything about this, I will be grateful.
Thanks
JasonError 1015 is most often given if the iPhone has the iPad Baseband 6.15.00 installed. There is now finally, a week ago, complete fix for this problem. Restores the iPhone GPS and iTunes Restore function back to normal. Search the Web for help.
-
error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. What sould I do?
Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
After downloading the newest version, 10.6.1, whenever I open itunes I almost immediately get a "itunes has stopped working" error messsage, in which the only option is to hit the "close the program" button. Simply closing the error message closes the program as well. I am operated under windows XP with the latest updates (or so the updater tells me). It seems like its getting stuck trying to send me a new user agreement because dont you have to agree to one for every new update? It just can't seem to get past that point. I tried opening it up in safe mode but that didnt work either. Any help would be greatly appeciated.
Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo -
An update was downloaded and failed to install properly. When I tried to use the old Itunes, I get the message "The program can't start because MSVCR80.dll is missing from your computer". I then received the message "iTunes was not installed correctly. Please reinstall iTunes"I tried reinstalling with the same error message. I then uninstalled the old version, downloaded the new version and still received the same message. How do I solve this problem?
Followed mspanner's instructions and was able to correct the problem. Thanks for the help.
-
Why does my macbook have the gray screen when it starts up?
my macbook pro has just started doing this - i keep it plugged in most of the time, and this has never been a problem for my previous macbook or before with this macbook until recently. every time i shut my laptop, and then open it later, it brings me to the gray screen with a white bar that loads pretty quickly, and then it brings me to my password login page. however, it takes a little longer for my mouse/cursor to be functional at this screen. any idea why this is happening? i have never had it do this before so i am not sure what is going on because i haven't been doing anything differently.
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
-
Error message when i start iTunes 7...HELP PLEASE!!
whenever i start up itunes 7, i get an error message, and the details read:
This error report includes: information regarding the condition of iTunes when the problem occurred; the operating system version and computer hardware in use; your Digital Product ID, which could be used to indentify your license; and the Internet Protocol (IP) address of your computer.
PLEASE HELP! I JUST GOT MY iPOD TODAY AND I FEEL LIKE I'VE JUST WASTED $250!!!
Windows XPOK first we will see if the issue is on the PC side and not the iPod. Uninstall iTunes,Quicktime, and the updater from control panel>add/remove. Uninstalling iTunes will not delete any playlist, songs, ect ect.
Then run chkdsk in windows to correct any lost or damaged system files. To do this goto "My Computer" rightclick the harddrive (Usually C Drive) Select properties>Tools tab and under "Error checking" hit check now. In the following window that appears, put a check beside "Auto fix file system errors" hit OK then hit yes in the next window. Reboot and after the check is done it will boot back into windows
Now disable any antivirus/security/norton/mcafee products then download/install the latest iTUnes here http://www.apple.com/itunes/download/ and iPOd updater here http://www.apple.com/ipod/download/
If this does not work check the system for malware (General term for adware and spyware) with Ewido, this program tends to catch alot of malware that messes with iTUne and iPod software http://www.ewido.net/en/download/ -
TS3694 I'm getting an error message when I start ITunes (-42110)
does anyone know how to fix this error?
Try removing the Sc Info folder
See this article:
http://support.apple.com/kb/TS1389
Look under "Remove SC Info folder" -
I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
i have just recieved the error meassage when trying to open up both my AI and PS. I have paid the monthly payments for the membership and i have both softwares installed. what can i do to work on them and why are they giving me this error message?
Sign in, activation, or connection errors | CS5.5 and later
For anything else you have to be more specific. you have not provided any system information nor told us, what the error message actually is.
Mylenium -
I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
Maybe you are looking for
-
I was charged for overage minutes after I was told upgrading to a next higher plan would not.
During the month of January, I was about to go over on my minutes and I called Customer Service. A representative told me my best option was to upgrade to the next higher plan and pay the difference rather than getting charged for the overage minutes
-
Adding 2nd hard drive(IDE 40gig) to B&W G3 w/ 9gig SCSI drive
Recently got a 450 B&W G3 with a 9gig SCSI ultra something drive in it already and i would like to add a 40gig IDE drive as a second. the scsi drive is hooked through a scsi card and is the main drive. i want to just add the second drive for more sto
-
I need to know how to focus in an psd extension file on an image/symbole and make of that a picture with the common extensions ,also how to declare in any point of the psd the color code and to know the font properties too.
-
Can you get a new screen for the iPod touch 4th generation?
My iPod screen keeps on falling apart and I was wandering if I could get a new screen for it, but maybe in a different colour?
-
Error when attempting to play shared iTunes library
I have two iTunes Shared libraries on my network, coming from seperate machines. I am using a Mac Mini as a media server. Both of my shared libraries show up on the list. When I attempt to view one of the libraries I get the following error message..