TS1394 Can't re-install Leopard. Trying to reinstall the OS because computer locks up. It is a 2008 iMac that came with Leopard. Upgraded to Snow Leopard. Tried to archive and install from original DVD that came with iMac. Installation failed, so tri
Computer locks up, so I want to reinstall the OS. I had upgraded to Snow Leopard.
Tried to do an archive and install from the DVD that came with the computer, but that failed.
Tried to do an erase and install, but the install stops somewhere near the end, 13 minutes to go. Tried several times, same result.
Can't reboot from the install disk, it just ejects the disk and I get the flashing question mark.
Any suggestions will be appreciated.
I think my hard drive is toast. When I boot in single user mode, I get the following text:
CSRHID Transition Driver: start booting in single user... will wait for window server
Then the following text appears, repeating itself over and over, except that the numbers (indicated by "xxxxxxx")
SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
disk1s3: I/O error.
0[level 3] [READUID 0] [Facility com.apple.system.fs] [ErrType IO] [Err No 51] [IDType READ] [PB1kNum xxxxxxxxx] [LB1kNum 0] [FSLogMsgID xxxxxxx] [FSLogMsgOrder First]
0[Level 3] [READUID 0] [Facility com.apple.system.fs] [FSLogMsgID xxxxxxxxxx] [FSLogMsgOrder Last]
These messages keep repeating with the numbers (xxxxxxxxx) changing with each iteration.
Does this indicate a bad hard drive?
Thanks.
Similar Messages
-
Hi, I am interested in upgrading to snow leopard but I've heard in some cases it messed up peoples computers. Is there any advantages in upgrading to Snow Leopard from Leopard? Thank you in advance for the advice points will be given to multiple users. Here are my computer specs (Leopard 10.5.8.)
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHzYou need not upgrade unless there is something you do that cannot be done unless you upgrade. Upgrading OS X doesn't mess up anyone's computer. Users mess up their computers.
Your model has 2 GBs of RAM which is adequate for Snow Leopard although 4 GBs would be better. Upgrading to Snow Leopard will cost $29.00. You can order from Apple's Online Store. Here's a good procedure to follow:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
Does anyone else think that the AppleMac group of products are marketed in a greedy way? I have MacBook Pro 10.5.8 with Leopard and am now told that I have to upgrade to Snow Leopard so that my system can download the relevant iTunes upgrade to sync my new iPad and get my audiobooks (which don't appear anywhere on the device right now). Of course there isn't enough memory on the MacBook and Snow Leopard costs more also? I don't have financial resources to pay for all the new memory requirement and related upgrades they say I need just to sync my iPad with my purchases.
Thanks for the reply but I already knew this. $20 for Snow Leopard which asks for 5gb free memory. I can only see that I have 4 gb (which I feel is rather a pathetic amount of available memory for any computer). To upgrade this computer's memory will cost another fee (I haven't researched this yet but gather it's more than $20). Then of course I could also be told that the OSX Mackbook Pro that I have can't be memory upgraded - which means I'm being told to buy a new computer - hence my very frustrated last email. I have been given a lovely iPad 2 as a present and now can't sync at all with anything because of this ongoing upgrade nightmare. How on earth am I going to be able to sync my movies, audiobooks etc to this new device??
-
FireWire 400&800 (IMAC Core2) NOT WORKING after Upgrading to SNOW LEOPARD!
My FireWire 400&800 (iMAC Core2) are *NOT WORKING* after Upgrading to SNOW LEOPARD!
Any Solutions?
Thanks!
--Frank Strallents
www.SHOCKPROOFX.comI'll try your suggestions....Thanks!
Recently, I try to Re-install Snow Leopard, unfortunately, still unsuccessful.
The Mybook Icon only appears if it is connected via USB.
After using Firewire and getting used to the speed...USB 2.0 is like a Corvette racing a Veyron...lol
I am not upset on these issues, it is normal for new OS to have these problems...unfortunately, even OSX is not invincible.
I'm sure Apple/Steve is on every Programers A*s for a solution.
I still think APPLE'S OSX will still be the future of Operating system!
For now, still waiting for the patch and hopefully soon.
Suggestions are still Welcome for a Solutions:-)
Frank
SHOCKPROOFX.COM -
I have a 10.5.8 MacBook Pro that I want to upgrade to Snow Leopard. Where do I find the upgrade code
I have a MacBook Pro from September 2007 that I want to upgrade to the latest OS. I have 10.5.8 on it now, but can't seem to find the code or files any where to upgrade it to 10.6.8 (Snow Leopard) so I can then step it up to Mountain Lion. Anyone have a link to where I can find this code.
Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion. -
Based on user issues I am reading should I even attempt this. One of my reasons of wanting to upgrade is to have the ability to upgrade to newer versions of certain programs such as Lightroom and Adobe Photoshop.
I've upgraded several Mac from 10.5 to 10.6 and all the installations were trouble-free. However, in an abundance of caution, back up before you start upgrading.
RAM: Most 2008 iMac shipped with 2GB RAM. Your iMac 2008 can use up to 4GB RAM "officially" and up to 6GB with memory modules introduced since Apple's offical specs were engraved in stone. Although 10.6 may do ±OK with 2GB, I suspect Photoshop is glomming on to all you have. Lion10.7 will just barely work with 2GB and 10.8 Mtn Lion may slow to a crawl.
I get all my RAM upgrades here:
http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400
Never had a problem with any of their RAM and I've been getting it from them for over a decade--and we have 18 Macs in the family! -
After archive and install, can you go back to old system?
After some trouble with permissions, I decided to do a clean archive and install from 10.2.8. Too late I realized that the install would be 10.2.
The permission trouble did not go away, and now I have additional trouble with upgrading everything, the combo upgrade to 10.2.8 does not work, error messages etc.
Is there a way I can undo this and use my old system 10.2.8 again which is saved in a folder?
Thanks.Hiltraut:
As ali brown has already pointed out your iMac does, indeed, have 2 Firewire ports. Depending on which optical drive you have (the computer shipped with CD-RW, DVD/CD-RW, or SuperDrive) you can install Tiger directly.
Since you have an older version of Jaguar, and since it does not seem to be very co-operative, I suggest that you seriously consider upgrading to Panther or Tiger. To install Panther your computer will need to meet the minimum system requirements for Panther. You will need to purchase the Full Retail version of Panther.
To install Tiger your computer will need to meet the minimum system requirements for Tiger. You will need to purchase the Full Retail version of Tiger.
You can purchase universal installer versions of Panther, guaranteed to install, or Tiger on CDs, from applerescue. Please note that Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore, very likely, cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...
If you decide to go that route please post back for assistance with how to proceed.
Good luck.
cornelius -
Doesn't accept User name + Password after archive and install
I did an archive and install, when finished the install the computer restarted and came up with the login Name + Password screen. I type in every account Name + Password I know and the login window just shakes telling me its wrong. I don't know what to do from this point, I was thinking about reseting the admin password but I'm not sure thats the problem because we have two admin accounts and I know both passwords.
I archive and installed 10.4.0 over 10.4.7. And currently on my backup install of tiger.I did an archive and install because I had no video, and sometimes could not turn on the IBook. I have had two logic boards that went bad and were fixed free by Apple. When I finished the install the computer restarted and came up with the login Name + Password screen. When I type in Name + Password the login window just shakes telling me its wrong, which it is not.
It is possible that the administrator or other user on the computer were erased at some point when I thought to get rid of unnecessary stuff (mistake!)
I archive and installed 10.2.0 over 10.3.7, because I thought the instructions were to use the original install disk.
I have a backup of the info on this computer on a MacBook Pro that I use all the time, this IBook I only use for email, etc. -
Hello All,
I am having the same login problems everyone else seems to be having with a new twist, when i go to archive and install and hopefully fix this mess, i realize that i now only have 6gigs left on my hd, and i need 11 to install. I am assuming this is because leopard has already been installed once. Here is the kicker, it wouldnt be a big deal to make space on the hd, but i have no idea how to get to my files since i cannot login and cannot access finder! Any help would be greatly greatly appreciated!
Thanks
RyanLook at the root directory for your disk and check if there is a "Previous Systems" folder. If so, open it, and if there are multiple versions there, you may be able to safely delete one or more of them. Check the contents to be sure you're keeping the most recent copy. Hopefully, you have an external backup to restore from in case you have to 'erase and install' Leopard.
-
Panther Archive and install problems
I have a light grey screen with an apple logo on it after performing archive and install using Panther. Nothing else. Any ideas anybody....?
I really am at a complete loss with this and its been several days now. I'm losing money and patience bigtime.
Help..!Yes you can chose your system that way, but since you can't startup normally I feel you still have a problem. Next time it does it try things in Apple doc.#106464.
I don't have any suggestions on Ext. FireWire HD's (don't get USB). I use a WesternDigital, but others in these forums don't care for that brand. Comp USA has quite a large selection. Online, Amazon does too as do other sites. Make sure you get an Ext HD that is bigger then your internal so you don't run out of space.
Cheers!
DALE
Edit, I forgot you're in the UK,sorry for CompUSA reference. -
Archive and install best option ?
Hi,
I want to upgrade to leopard but what is best knowing that i noticed a minor issue in my HD when I checked ans repair autorisation?
Is simple upgrade will do or should I archive and install in order to resolve the issue ?
Many thanks guys
FredUpgrading is never a real good idea, especially if you are experiencing problems from the start. Archive and Install would be a better route.
-
Can my Powerbook 12" Upgrade to Snow Leopard?
Hi,
I wanted to use the latest version of iMovie, but in order to do that, I have to upgrade to Snow Leopard. Unfortunately, I am not sure if my Powerbook can handle this.
I have the following:
Powerbook 12"
1 GHz PowerPC G4
768 MB DDR SDRAM
This isn't Intel based or anything like that. If I can't upgrade to iMovie6 then are there other versions I can use besides what I currently have which is iMovie 3.
Thanks for your help!Check out the following KB Articles:
http://support.apple.com/kb/HT2675 *iLife '06: System Requirements*
http://support.apple.com/kb/TA24099 *iMovie HD 6 and iMovie '08 require Quartz Extreme-compatible graphics cards*
!http://i50.tinypic.com/izvwo1.gif! -
Hi, I am interested in upgrading to snow leopard but I've heard in some cases it messed up peoples computers. Is there any advantages in upgrading to Snow Leopard from Leopard? Thank you in advance for the advice . Here are my computer specs (Leopard 10.5.8.)
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHzHi, I am interested in upgrading to snow leopard but I've heard in some cases it messed up peoples computers. Is there any advantages in upgrading to Snow Leopard from Leopard? Thank you in advance for the advice . Here are my computer specs (Leopard 10.5.8.)
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz -
I have a macbook air running on OS X 10.5.8. I wish to run on the new mountain lion. I realise that i am currently on leopard which means i have to upgrade to snow leopard or lion before i can get mountain lion. However because i am on leopard, i have no mac store and because i have an air, i have no disk drive. how do i upgrade to snow leopard or lion without these?
Any help would be greatly appriciated. if i've missed something basic im very sorryApple confirmed the removal of the software this afternoon, and said that customers can still purchase a copy from its online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.]
Non-Apple sources for Snow Leopard:
Snow Leopard from Amazon.com
Snow Leopard from eBay
If you call Apple then you should ask about purchasing the Lion USB Flash Drive installer if you want to skip over buying Snow Leopard.
Be sure your model can run Mountain Lion:
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009) -
I have OS X 10.5.8, should I upgrade to Snow Leopard, or a later version?
I have OS X 10.5.8 on a 2008 Macbook Pro. Should I upgrade to Snow Leopard, or a later version?
Depends. If you use and need PPC apps, then SL. If you don't use any of those, then go to whatever the machine supports. Details at Lion specs and MLion specs.
Maybe you are looking for
-
Mark of the web/template problem
I created three Dreamweaver Templates for my site. I inserted the mark of the web code to each template to allow me to test and preview pages without the pop-up messages. All of my pages are about done and some pages using spry and SWF files weren't
-
My catalogues and tags are missing from my Organizer in Photoshop Elements 10? What is going on?
My catalogues and tags are missing from my Organizer in Elements 10. What is going on?
-
Flash Player 9.0.124.0 made U-Tube stop working
Just like the topic title suggests. I installed the newest version of Adobe Flash Player (9.0.124.0) after a notification alerted me to new security updates for the flash player. I installed the new version, went to Youtube to play a video and I get
-
AFTER IOS 5.0.1 MY IPHONE 4 DON'T FINISH SYNC WITH ITUNES. I NEED HELP
-
How to get the data by excluding the columns which are having null values
I have a table with 10 columns , 3 columns are having all null values . I want to retrive the data by excluding these 3 columns. That means output table should contain only 7 columns . Can u give a query on this? Thanks, Mahesh