TS1394 I just upgraded my MacBook to Snow Leopard and installed a 2011 version of MS Office for Mac.
Just upgraded to Snow Leopard and a 2011 version of MS Office for Mach - student/ teacher edition
When I try to open Power Point it just remains in the first screen with things listed like "Whats new in Power Point Mac" and "access your files anywhere" - the screen is frozen and I can't get into the program. Any suggestions?
http://answers.microsoft.com/en-us/mac
Similar Messages
-
I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?
Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins. -
I've just upgraded to Lion from Snow Leopard and to my surprise it does not support my 'Appleworks' application software. Ihave used Appleworks for all correspondence for six years and need to refer to the files (letters etc.) from time to time. Is my only option to revert back to Snow Leopard?
The reason appleworks no longer runs is because it is a powerpc based application. Since it's end-of-life in 2007, it was never converted to intel architecture, since it was dropped as a supported product. It continued to run on intel machines via rosetta, but OS X Lion formally discontinues all support for powerpc based programs. Powerpc based applications can only be run on OS X 10.6.8 or earlier releases (ones that still support rosetta).
So, it does sound like your best option is to move to iWorks' Pages now - otherwise you will be stuck with an increasingly more outdated operating system. And if you should buy a new machine, it would not run the older versions of OS X anyway, so at some point you have to leave appleworks behind and move on. Seems best to do it now, before Pages perhaps also moves forward to a point where it too may no longer support ancient file formats.
http://www.apple.com/support/appleworks/faq/ -
Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.
Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.
-
After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thankszepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??
Did you click on the little triangle? Did you select one of the document files before pressing COMMAND-I to open the Get Info window? If the panel is closed it looks like this:
If you then click on that little triangle gadget you get this:
A temporary solution is to CTRL- or RIGHT-click on the document file, navigate to the Open With item, and select from the sub-menu.
The first method makes the association permanent. This method only applies to the currently selected document. -
after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?
Download 9.1 and 9.2.3 updates and install them
-
I have an OS X 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD.
Can someone please give instructions?Welcome to the Apple Support Communities
To restore the MacBook Pro to factory settings:
1. Make a backup of your files because everything will be erased.
2. Insert the Snow Leopard disc and press the C key while your Mac is starting to start from the DVD.
3. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
4. Close Disk Utility and install Mac OS X -
My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?
Use the manual methods.. but it is possible for TM to wipe the old files in trying to fit into the space.
Try Q16.. but read all the section 14-17
http://pondini.org/TM/FAQ.html -
I upgraded to Yosemite from Snow Leopard and lost my address book. Is there any way to retrieve the information?
Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
Transfer other music by using a third-party programlike one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
You can also rredownload mos iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Removing Snow Leopard and Installing only Windows on Mini
I've owned my Mac Mini now for about a month; it was my first immersion into OS X and, quite frankly, I do not like it. I do like the physical form of the mini and figured I would just delete Snow Leopard and install Windows 7 (preferably 64 bit) on it.
Can this be done? I don't want to use boot camp and lose all my partitions. I want it to be a Windows only machine.
Thanks for your time.David is right. you need boot camp in order to install winsloth on a Mac.
one way to go about that would be to install Mac OS X on an external drive, boot from there and use boot camp assistant to create one big partition on the Mac's startup disk for the winsloth installation.
on the Mac side, use system preferences > startup disk to select which system is used to start up.
nevertheless, i would @ least browse the boot camp forum for user tips on how to best achieve what you want.
good luck !
JGG -
I installed Snow Leopard and have the latest version of iTunes. However, when I connect my iPhone 4S, it charges and iPhoto opens, but iTunes doesn't seem to recognize the iPhone. It simply doesn't appear in the left column. What gives?
http://support.apple.com/kb/TS1591
-
Help - upgrading from Tiger to Snow Leopard AND new larger hard drive, MBP
Howdy!
My iPhone has finally demanded that I upgrade my MBP from Tiger. And as if by coincidence, my now puny 100GB internal drive is packed full with less than a gig free most of the time. (10% free is the MINIMUM free allowance, I know!!) I run old copies of Adobe CS2, Quark, Quickbooks, Microsoft Office... would love to keep them working without purchasing upgrades, but probably isn't a realistic hope. None of it is mission critical at this point.
So I've purchased the $29 Snow Leopard DVD (from a reseller - it says CPU Drop-In DVD Version 10.6 on the disk), and a new 750GB internal drive (same reseller - The drive is a 2.5" SATA 5400RPM 8MB-Buffer Hard Drive (9MM Slim) (RoHS Green Friendly)), to get with the times.
My other resources include:
- two 1TB LaCie external drives with FW and USB2 ports
- one other LaCie external drive - I think 360GB?
- Retrospect 5.0 (most of my backups are encrypted Retrospect files on those three LaCie external drives, but there's some room on them)
- a $22 USB 2.0 to SATA/IDE adapter with AC power, to access whatever laptop drive might be without an enclosure temporarily
- a copy of Carbon Copy Cloner software
- I just ordered an upgrade to my ancient (OS9) copy of DiskWarrior
- A monster UPS battery backup and line conditioner that everything plugs into for this process
It has been a long time since I've DIY'd any undertaking this complex, and I'm looking for advice on what to do first, how to go about this.
Here's my setup:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
I'm guessing I should do it like this, PLEASE EDIT or make suggestions or tell me what I forgot to do before I do it!!
1. Back up everything to at least two external locations! Also, make a bootable copy of my current internal drive in its own volume, to at least one external drive that is formatted in HFS+ GUID partition style, with Carbon Copy Cloner (would Retrospect work well for this instead?).
2. Free up at least 20GB on the current internal drive (100GB). Hopefully 30GB.
3. Run Disk Utility on the current internal drive. Fix any problems. (Should I hit it with DiskWarrior instead?)
4. Format the new 750GB drive to HFS+, GUID partitions. (How long will that take? Can I do it with the USB-SATA cable adapter, sitting on my desk, or does it have to be in an enclosure? The adapter has AC power)
5. Run Disk Utility (or DiskWarrior?) on the new internal drive in its temporarily external position. Fix any problems.
6. Boot off the Snow Leopard CPU Drop-In DVD and install onto both drives. (Will this version of the DVD I have wipe all files when it installs to a disk???)
7. See how they run. Boot off the old 100GB internal drive, boot off the new to-be-internal 750GB drive. Panic if it's not going well.
8. If the current internal 100GB drive is rocking Snow Leopard and my familiar files and apps seem somewhat functional, use Carbon Copy Cloner to recreate the volume on the new larger drive. Then swap the drives physically. (Links to good step-by-step instructions on this part would be much appreciated here!!)
9. If the Snow Leopard DVD overwrote or snuffed out my familiar files and apps on the old internal drive, sigh deeply, then swap the drives physically. Use CCC (or Retrospect? or Migration Assistant?) to fetch my junk from the old internal drive's backup and plunk it on the new bigger internal drive (now installed).
10. See how it runs. Shake my fist at the sky over the planned obsolescence of technology paired with the seductive power of my iPhone. Grumpily upgrade the software that I actually create income with.
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
Thanks!Howdy slowpoke43, and a warm welcome to the forums!
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
LOL, if your faking it you're the best!
1. Yes, absolutely... no CCC would be best in my experience/opinion.
2. Yes, the more he better... Free Space is no longer our Free Space, but OSX's.
3. Indeed, & if you have the correct version of DW, do that.
4. Yes, not long, A/C power is great.
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
6. Yes, boot off the 10.6 DVD, & no Snow Leopard does by default what we used to call an Archive & Install, saves & updates all your info, APPs, Music, etc., it may quarantine a few things or not but will tell you.
7. Absolutely, but Panic won't be needed with your great preparation & Bootable Backups!
8. Not quite sure I understand, but run SL for a few days before you do anything.
9. Yeah, but again with you doing everything right from the gitgo, I can't picture that happening.
10. Yes indeed, the hangup with yours is that it only holds 2GB of RAM... a pain in 10.5 & up IME.
Again let me say... GONGRATS, I've never ever seen anybody so well prepared & informed despite your diffidence! -
HELP! I upgraded my macbook pro to leopard and garageband won't open!
To anyone who can help!
I've just upgraded my MacBook Pro 15 Inch to Leopard and now my GarageBand won't open up! What's more, my MacBook Pro now seems slower. Can anyone help me to get this fixed? I'm open to all suggestions!
-meverythingWell, I tried the permission repair thingy and it didn't work thanks for the advice though. really appreciate it. Any other ideas though?
-meverything -
Need help removing Snow Leopard and Installing Leopard
Snow Leopard was a waste of time and money. Time I could have used for much more productive work.
How can I remove snow leopard and reinstall leopard. I have the installation disc for Leopard. Can I simply install it over the top of snow leopard?
That would solve my problem for one machine (the iMac) but how do I go back to leopard if I don't have the disk? I suppose there is dmg somewhere but I haven't looked so I apologize in advance if the answer is obvious.Insert leopard install disk-select install.
It will wipe the drive and install Leopard-all data will be gone.
You must have a legitimate, legal copy of leopard.
If you backed up the leopard dvd, you would have to burn it or figure a way to do a network install.
Maybe you are looking for
-
My new to me Macbook Pro is frozen
This is kind of a long winded story, but I want to make sure I don't miss a beat. I recently purchased a Macbook Pro 13 inch with 2.4 Ghz Dual Core with 8 Gigs of ram. It is used and is just under two years old. It was purchased with a freshly scru
-
Text Not Lining Up Properly in Fillable Form | Acrobat 9 Pro
I have a number of documents that were created in MS Word and then I converted them to PDF through Adobe Acrobat 9 Pro. A number of those documents have text fields that the end user will type their data into - example: a message area on a fax cover
-
My iPhone 3G won't charge. How can this be fixed?
I have tried charging from mt iMac, and two different chargers using two different cables. No success with any of the combinations.
-
Hello, Ihave an ipod and an iphone, and 15 days ago, my computer died and I only had a bac up for my music in an exernal hard driver , I borrowed a computer for a while and I hav already restored my music . Is there a way to retrieve my playlists, an
-
Hi, The statement SET PF-STATUS 'ABC' EXCLUDING 'xyz'. hides the button, I just want to disable it but still visible. How to do that ?? thks